Cambridge Massachusetts Building Expert Directory

Mechanics Lien Release Bond – What Happens Now? What exactly is a Mechanics Lien and Why Might it Need to be Released?

January 04, 2021 — William L. Porter - Porter Law Group
Mechanics Lien Release Bond – What Happens Now? What exactly is a Mechanics Lien and Why Might it Need to be Released? California law entitles unpaid contractors, subcontractors, and material suppliers to record a mechanics lien on property where they performed work or supplied materials. The mechanics lien attaches to the real property as a legal interest and secures the right to payment for the work performed and materials supplied. If payment is not forthcoming the mechanics lien allows the property where the work was performed and materials supplied to be sold under court order to satisfy the debt. It is a powerful remedy against owners and their agents who do not pay for work performed and materials supplied to improve the owner’s property. A Mechanics Lien Release Bond Frees Property from a Mechanics Lien Owners typically do not wish to have their property sold out from under them. Fortunately for owners, there is a method by which a mechanics lien can be substituted for another interest and sale of the property thereby avoided. This method is through the use of a mechanics lien release bond. California Civil Code §8424 allows a property owner or contractor effected by a mechanics lien to record a mechanics lien release bond equal to 125 percent of the lien amount with the County Recorder where the mechanics lien has been recorded. The effect of this is to substitute the mechanics lien release bond for the mechanics lien itself, thereby relieving the property from the possibility of that property being sold to satisfy the debt. Instead, any payment made will come from the release bond. Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

Inside New York’s Newest Architectural Masterpiece for the Mega-Rich

May 20, 2015 — Oshrat Carmiel – Bloomberg
The newest condominium tower in midtown Manhattan's billionaires district is ready to open its doors to buyers. It took almost a decade to get there. The skyscraper at 53 W. 53rd St., designed by French architect Jean Nouvel and rising next to the Museum of Modern Art, will start marketing its 139 apartments next week, with prices starting at $3 million. Planned since 2006, the project endured the real estate bust and a global financial crisis that decimated demand for luxury homes. Now it's emerging when buyers can't seem to get enough of them. "We're very eager to begin,'' said David Penick, the New York-based managing director for developer Hines, which is building the project with Goldman Sachs Group and Singapore-based Pontiac Land Group. "We're confident in what we have to sell in the market we're in, and we'll see how it goes.'' Read the court decision
Read the full story...
Reprinted courtesy of Oshrat Carmiel, Bloomberg

Subsequent Owners of Homes Again Have Right to Sue Builders for Construction Defects

October 07, 2016 — Mark L. Parisi – White and Williams LLP
Owners of homes with damage from construction defects have long had the standing to sue the builders of their homes using the legal theories of 1) breach of contract, 2) breach of implied warranty, and 3) breach of Pennsylvania’s consumer fraud statute, the Unfair Trade Practices and Consumer Protection Law (UTPCPL). Before the 2014 decision of the Pennsylvania Supreme Court in Conway v. Cutler, even owners who were not the original purchasers of their homes, so-called subsequent owners, had a right to sue the builder of their homes using implied warranty as the legal theory. But the Supreme Court in Conway said in 2014 that even though an implied warranty theory is not based on a written contract, it is a quasi contract theory and because subsequent owners never had a contractual relationship with the builder of their home, the implied warranty cause of action was not available. Subsequent purchasers were thus left without a remedy for damage from defective construction in their homes and builders had a second safe harbor from claims regarding homes they built. The first safe harbor is Pennsylvania’s Statute of Repose. If the home was completed more than 12 years before a lawsuit was filed, the Statute of Repose bars the claim. But after Conway, if the home was sold, this also cut off a builder’s potential liability for construction defects in the home. ENTER THE UTPCPL On July 26, 2016 the Pennsylvania Superior Court in the case of Adams v. Hellings Builders issued a non-published (and therefore non-precedential) decision in a stucco construction defect case that held that subsequent purchasers could sue their home’s builder under the UTPCPL because the Act had no requirement that the purchaser of a product, or home, be the original purchaser. The decision cites several other appellate cases not involving construction defect claims that held that the UTPCPL was a valid legal theory for claims regarding products purchased second hand by the plaintiffs in those other cases. The court in Adams held that there was no reason that a suit regarding construction defects in a home should be treated any differently. Read the court decision
Read the full story...
Reprinted courtesy of Mark L. Parisi, White and Williams LLP
Mr. Parisi may be contacted at parisim@whiteandwilliams.com

Can an Architect, Hired by an Owner, Be Sued by the General Contractor?

September 10, 2014 — Craig Martin – Construction Contractor Advisor
As is often the answer in this blog, maybe. And, it will likely depend on which state’s law is applied. Over the last few weeks, courts around the country have reached differing conclusions on whether a general contractor may sue an architect that it did not hire. Here’s the situation: The owner hires an architect to draft plans for a project. The project is then put out for bid and the owner hires a general contractor for the work. The general contractor and architect do not enter into a contract with each other. If, during construction, the general contractor finds fault with the plans, it may seek Request for Information and Change Orders, to shore up the perceived problems with the plans. Ultimately, the general contractor may sue the architect to recover damages it suffered in completing the project. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

Best Practices: Commercial Lockouts in Arizona

April 15, 2024 — Patrick Tighe - Snell & Wilmer Real Estate Litigation Blog
If a tenant defaults under a commercial lease, Arizona law permits the landlord to re-take possession of the premises by locking out the defaulting tenant. However, if the landlord’s lockout is wrongful, the landlord may be liable for the damages the tenant sustains because of the wrongful lockout. To minimize such liability, here are some general best practices to follow when locking out a defaulting tenant:

Do Not Breach the Peace. It is vital when performing a lockout to not breach the peace. What constitutes a “breach of the peace” depends on the particular circumstances at hand. For example, if a tenant arrives during the lockout and becomes angry or threatens violence, the landlord should stop performing the lockout and return at a later time. As a general rule of thumb, it is best to perform lockouts in the early morning hours or in the late evening hours when the landlord is less likely to encounter the tenant.
Provide A Notice of Default. Many commercial leases require the landlord to provide a notice of default before the landlord can lock out a defaulting tenant. Check, double check, and triple check that the landlord followed the lease’s notice of default provisions correctly, including that the landlord sent the notices to all required parties in accordance with the time requirements set forth in the lease.

Read the court decision
Read the full story...
Reprinted courtesy of Patrick Tighe, Snell & Wilmer
Mr. Tighe may be contacted at ptighe@swlaw.com

Crane Firm Pulled Off NYC Projects Following Multiple Incidents

October 07, 2019 — Jeff Rubenstone - Engineering News-Record
Following a partial crane collapse at a site on Manhattan’s Lower East Side and a fatality in April on a jobsite in lower Manhattan, the New York City Dept. of Buildings announced on Aug. 12 that it is suspending United Crane & Rigging’s work on 21 construction sites across the city. Jeff Rubenstone, Engineering News-Record Mr. Rubenstone may be contacted at rubenstonej@enr.com Read the court decision
Read the full story...
Reprinted courtesy of

Changes To Commercial Item Contracting

May 29, 2023 — Marcos R. Gonzalez - ConsensusDocs
The FAR Council has recently published two changes to commercial item contracting that clarify the definition of commercial services and simplify commercial item determinations (“CIDs”) for contracting officers (“COs”). Since the 1990s, the federal government has encouraged the purchase of commercial items to ease the regulatory burden on vendors who have not previously conducted federal business, encourage innovation, and lower prices[1]. These different objectives (cost savings, broadening markets, innovation) often have corollary policies; for example, vendors who are not accustomed to the regulatory burdens of government business are encouraged to enter the market by being exempted from a slew of regulations (found in standard commercial items clause FAR 52.212-4). As a result, the regulations applicable to commercial item contracting are those required by statute and executive orders in addition to generic commercial terms that may be tailored due to potential variation in commercial terms.[2] Commercial Products v. Commercial Services The first change, in effect since November 2021 pursuant to the 2019 National Defense Authorization (“NDAA”), split the old definition of “commercial item” into two separate definitions: “commercial product” and “commercial service.”[3] We are now blessed with the following definitions of commercial products and services, respectively: Commercial product means— (1) A product, other than real property, that is of a type customarily used by the general public or by nongovernmental entities for purposes other than governmental purposes, and– (i) Has been sold, leased, or licensed to the general public; or (ii) Has been offered for sale, lease, or license to the general public; Reprinted courtesy of Marcos R. Gonzalez, Peckar & Abramson, P.C. Mr. Gonzalez may be contacted at mgonzalez@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

2021 2Q Cost Report: Industry Execs Believe Recovery Is in Full Swing

August 04, 2021 — Jonathan Keller - Engineering News-Record
The first six months of 2021 have seen big materials cost hikes, increasing labor shortages and uncertainty over federal action on a major infrastructure package. Despite the headwinds, ENR’s Construction Industry Confidence Index has surged up 17 points to a rating of 68—the highest single jump between quarters since the index was started in 2009. The previous record was 16 points between Q4 of 2011 and Q1 of 2012. Reprinted courtesy of Jonathan Keller, Engineering News-Record Mr. Keller may be contacted at kellerj@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES