Seattle Washington Building Expert Directory

The Requirement to Post Collateral Under General Agreement of Indemnity Is Real

May 16, 2022 — David Adelstein - Florida Construction Legal Updates
In prior postings, I have discussed the all-powerful General Agreement of Indemnity (click here and here). This is the document a bond-principal executes to obtain bonds (e.g., performance and payment bonds). Not only does the bond-principal execute this General Agreement of Indemnity, but typically, so do other indemnitors such as the company’s principals and their spouses, other related companies, etc. The objective is that the surety has financial comfort that if a claim is made against the bond, there are avenues where it will get reimbursed and indemnified for any cost it incurs, or payment it makes, relative to that claim against the bond. When a surety issues bonds, the objective is that all losses it incurs gets reimbursed because the bonds are NOT insurance policies. One of the powerful tools the surety can exercise in the General Agreement of Indemnity is to demand the bond-principal and other indemnitors to post collateral in an amount the surety deems sufficient to cover any losses it may incur. This is a right in any General Agreement of Indemnity I have seen and is a right the surety can rightfully exercise. A recent example is shown from the opinion in Philadelphia Indemnity Ins. Co. v. Quinco Electrical, Inc., 2022 WL 1230110 (M.D.Fla. 2022), which pertains to the surety’s motion for preliminary injunction. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

America’s Factories Weren’t Built to Endure This Many Hurricanes

November 05, 2024 — Brooke Sutherland - Bloomberg
America’s factories aren’t built for the current cascade of extreme weather events. Dozens of industrial sites were in the zone of impact as Hurricane Milton slammed into Florida’s West Coast this week, including several concrete plants, speed boat manufacturing operations and facilities owned by Honeywell International Inc., Johnson Controls International Plc, General Electric Co. and Illinois Tool Works Inc., among others. Meanwhile, a Baxter International Inc. facility in Marion, North Carolina, that makes 60% of the intravenous fluids used in hospitals around the country was shuttered because of damage from Hurricane Helene just two weeks ago. Mines responsible for producing more than 80% of the world’s supply of commercial high-purity quartz in nearby Spruce Pine were also affected by severe flooding, raising the risk of disruptions to semiconductor production, which relies on the material. Read the court decision
Read the full story...
Reprinted courtesy of Brooke Sutherland, Bloomberg

U.S. Construction Spending Rose in 2017 by Least in Six Years

February 07, 2018 — Scott Lanman – Bloomberg
Even with solid U.S. economic growth, construction spending rose in 2017 by the least in six years, as nonresidential building slowed and outlays by governments declined. The value of construction put in place increased 3.8 percent to $1.23 trillion last year, according to Commerce Department figures released Thursday in Washington. That’s the smallest gain since a 2.6 percent drop in 2011. Spending for December was up 0.7 percent from the previous month, exceeding the median estimate of economists for a 0.4 percent increase. Read the court decision
Read the full story...
Reprinted courtesy of Scott Lanman, Bloomberg

Smart Construction and the Future of the Construction Industry

October 11, 2021 — Caroline A. Harcourt, James W. McPhillips & Adam J. Weaver - Gravel2Gavel Construction & Real Estate Law Blog
“Smart Construction” is a loose term but generally refers to the development and use of processes and applications that improve construction planning and the management of projects (thereby potentially streamlining costs of construction). The increased deployment of collaboration tools (e.g., Zoom, Microsoft Teams, WebEx) and other cloud-based technology solutions during the COVID-19 pandemic will invariably result in more efficient project management in construction going forward. These type of efficiencies are sorely needed, especially as the industry is trying to recover from supply chain issues, lockdown challenges and social distancing requirements resulting from the pandemic. However, smart construction goes well beyond those basic business efficiency and collaboration tools. For example, drones are regularly used on construction projects to monitor site conditions, detect problems, and assess conditions safely. Meanwhile, newer technologies such as “programmable” cement, “self-healing” concrete, and autonomous and robotic machinery are increasingly being deployed in construction projects. And yet, these current technology solutions are just the tip of the iceberg as researchers continue to look for new ways machines and technology can be used to solve complex engineering challenges. Reprinted courtesy of Caroline A. Harcourt, Pillsbury, James W. McPhillips, Pillsbury and Adam J. Weaver, Pillsbury Ms. Harcourt may be contacted at caroline.harcourt@pillsburylaw.com Mr. McPhillips may be contacted at james.mcphillips@pillsburylaw.com Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Insurer's Motion to Dismiss "Redundant Claims" Denied

June 21, 2024 — Tred R. Eyerly - Insurance Law Hawaii
The insurer's motion to dismiss was more appropriate for an eventual summary judgment motion and was consequently denied. Sivan Lam v. Scottsdale Ins. Co., 2024 U.S. Dist. LEXIS 81262 (M.D. Fla. April 12, 2024). Lam suffered a loss to her home due to Hurricane Ian. When only a portion of the claim was paid, Lam sued his insurer, Scottsdale, for breach of contract (Count I) and declaratory relief (Count II). Scottsdale argued that Lam's request for declaratory relief was redundant of her breach of contract claim. The court noted that Rule 12 (b)(6), Fed. R. Civil P., was a vehicle to challenge a claim's sufficiency. Redundancy was not insufficiency, and it was not a ground for dismissal under Rule 12 (b)(6). Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

New Standard Addresses Wind Turbine Construction Safety Requirements and Identifies Hazards

October 09, 2018 — Christopher Daniels - Construction Executive
American Society of Safety Professionals’ industry consensus standard, ANSI/ASSP A10.21 – 2018 Safety Requirements for Safe Construction and Demolition of Wind Generation/Turbine Facilities, is the first standard to identify and address hazards specific to wind turbine construction. It includes nearly a dozen appendices that provide additional consideration and guidance for hazards that vary between projects, turbines and geographical areas. The new A10.21 standard starts by requiring a site hazard identification prior to construction commencing. It establishes the general contractor as the responsible party for site hazard identification assessment. This is because the general contractor is usually one of the first entities on site able to assess the various challenges/concerns such as: geography, utilities, environmental, etc. This assessment is usually done by driving the project site and identifying GPS coordinates of specific challenges. Reprinted courtesy of Christopher Daniels, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Daniels may be contacted at chris.daniels@mortenson.com

Providing “Labor” Under the Miller Act

January 28, 2019 — David Adelstein - Florida Construction Legal Updates
A recent opinion out of the Northern District of California discusses the “labor” required to support a Miller Act payment bond claim on a federal construction project. It is a good case that discusses the type of labor required to support a Miller Act payment bond claim. In Prime Mechanical Service, Inc. v. Federal Solutions Group, Inc., 2018 WL 619930 (N.D.Cal. 2018), a prime contractor was awarded a contract to design and install a new HVAC system. The prime contractor subcontracted the work to a mechanical contractor. The mechanical contractor with its sub-designer prepared and submitted a new HVAC design to the prime contractor and provided 4-5 onsite services to determine the location and layout for the new HVAC equipment, perform field measurements, obtain security passes, and plan site access and crane locations. The mechanical contractor submitted an invoice to the prime contractor and the invoice remained unpaid for more than 90 days, which the prime contractor refused to pay. The mechanical contractor than filed a Miller Act payment bond lawsuit. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Public Contract Code Section 1104 Does Not Apply to Claims of Implied Breach of Warranty of Correctness of Plans and Specifications

October 30, 2023 — Garret Murai - California Construction Law Blog
It’s the classic tale of two cities. One city is occupied by architects and engineers. The other, by contractors. And while the cities typically co-exist relatively peacefully together, at times, they do not, such as when a defect arises that can either be a design or construction defect. Sometimes, project owners are pulled into these fights as well. There is a common law rule that when contracting with a contractor the owner impliedly warrants to the contractor that the plans and specifications are sufficiently accurate and correct. And, if you work on local public works projects, you may be familiar with Public Contract Code section 1104 which provides that, with the exception of design-build projects, local public entities cannot require a bidder to assume responsibility for the completeness and accuracy of architectural or engineering plans and specifications. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES