Fairfield Connecticut Building Expert Directory

Downtown Sacramento Building Riddled with Defects

July 23, 2014 — Beverley BevenFlorez-CDJ STAFF
The Board of Equalization tower in Sacramento, California has gone through $60 million in repairs to deal with issues such as bats, floods, leaky windows, mold, and glass panels that would “pop off the building with no warning and shatter on the sidewalk,” according to Insurance News. However, an additional $115 million in repairs are planned to deal with “crumbling core plumbing” and “concrete-and-glass exterior,” among other problems. Now, “a Sacramento attorney filed a $50 million tort claim this month, a first step toward suing the tax-collecting department on behalf of employees who say their bosses downplayed the building's ailments and put workers' health at risk.” "Even though my lawyers told me not to say this, I don't think it's safe," board Chairman Jerome Horton told Insurance News. Read the court decision
Read the full story...
Reprinted courtesy of

Reminder: Always Order a Title Search for Your Mechanic’s Lien

June 02, 2016 — Christopher G. Hill – Construction Law Musings
Mechanic’s liens are close to my heart as a construction attorney. These powerful tools for collection have been (and likely will be) discussed often here at Construction Law Musings. In fact, they rated their own page here at this little construction blog. While the form for a mechanic’s lien that is found in the Virginia Code looks simple enough, what goes into that form is key to getting past the initial stage of the mere recording of the lien and moving on to where a lien claimant wishes to go: Payment. Everything from the proper amount of the lien to the timing of filing, the parties named, type of work performed and who signs the lien can trip you up even before you get a chance to have a judge examine your payment claim. In short, this simple form has many pitfalls. On final item that is not often discussed is the description of the property and who the owner is on a project. A mistake on either of these fronts can be fatal as well. Often the “Owner” listed on the construction documents (the contracts, etc.) is not the same as the owner of the real estate to which your lien would attach. Sometimes a company may hire the general contractor as owner and either be a tenant of the property or could be the operating entity, but not the land holder. In either of these scenarios, merely naming the contract “owner” can be a mistake that could cost you your lien. The owner for lien purposes must be the land owner or there will be a problem. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, Law Office of Christopher G. Hill, PC
Mr. Hill may be contacted at chrisghill@constructionlawva.com

There Is No Sympathy If You Fail to Read Closely the Final Negotiated Construction Contract

February 28, 2022 — David Adelstein - Florida Construction Legal Updates
When an opinion in a case starts with, “Unlike some motions, not even the most ingenious lawyers could make this one complicated,” you know you are in for an interesting read. This was how the opinion started in U.S. f/u/b/o Hambric Steel and Fabrication, Inc. v. Leebcor Services, LLC, 2022 WL 345636 (M.D. GA. 2022), which concerns a Miller Act payment bond dispute between a subcontractor and prime contractor on a federal construction project. As demonstrated below, the moral of this case is in fact simple. Read what you sign BEFORE you sign! No ifs, ands, or buts. Failure to do so will garner very little sympathy. This case dealt with a prime contractor arguing that the subcontractor pulled the wool over its eyes by surreptitiously altering the final negotiated redlined contract between the parties. In particular, the prime contractor claimed that the dispute resolution provision was supposed to include a Virginia venue provision. However, the subcontractor “fraudulently” changed this provision to make it a Georgia venue provision after the final contract had been agreed to during the negotiation. Yet, it is undisputed that the executed contract between the parties included a Georgia venue provision. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Blog: Congress Strikes a Blow to President Obama’s “Fair Pay and Safe Workplaces” Executive Order 13673

March 22, 2017 — John P. Ahlers - Ahlers & Cressman PLLC
On October 25, 2016, the Federal Acquisition Regulatory Council (FAR Council) and the U.S. Department of Labor implemented former President Obama’s Executive Order 13673: “Fair Pay and Safe Workplaces” rules. The rules became effective on October 25, 2016 and fundamentally altered the way federal contractors and subcontractors will need to handle and resolve employment and labor claims, as well as compliance issues involving their entire workforce. The final rules can also result in otherwise-capable companies being “blacklisted” and effectively barred from federal contracts and subcontracts based on labor and employment law violations related or unrelated to prior or current federal contract performance. The centerpiece of the new regulatory scheme was the new disclosure and responsibility requirements. Contractors and subcontractors needed to disclose all “labor law decisions” that they had during the three years (prior to bid submission) as part of the process of applying for a new federal contract or subcontract. If a contractor or subcontractor has too many “labor law decisions” to report or the few it has are too severe, pervasive, repeated, or willful in the eyes of the government “experts,” the company could be deemed “non-responsible” and denied a contract. Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers & Cressman PLLC
Mr. Ahlers may be contacted at jahlers@ac-lawyers.com

Colorado Chamber of Commerce CEO Calls for Change to Condo Defect Law

March 05, 2015 — Beverley BevenFlorez - CDJ STAFF
According to the Denver Business Journal, Dennis Houston, president and CEO of the Parker Chamber of Commerce in Colorado, spoke at the state’s capitol recently, calling legislators “to make it harder for attorneys to file class-action lawsuits against condominium builders so that areas like his can attract a workforce of millennials.” Houston and other Chamber of Commerce leaders gathered at the capitol “to lobby for sensible energy policies and construction defects reform, among other things.” Read the court decision
Read the full story...
Reprinted courtesy of

Benefits and Pitfalls of Partnerships Between Companies

December 21, 2016 — Aarni Heiskanen – AEC Business
To bring innovations to the market, companies almost always need partnerships. Partnerships can offer scalability, productivity, and open up new markets. However, partnerships are not easy to establish and manage. The benefits of partnering Construction companies have always done joint ventures. The reason has been to simply be able to bid for and deliver a project that would be too big for one company at that specific moment. Partnering allows you to become larger than you are and to get work that would otherwise be out of your reach. It also lets you spread the risk in a demanding project among the members. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aarni@aepartners.fi

As Single-Family Homes Get Larger, Lots Get Smaller

September 03, 2014 — Beverley BevenFlorez-CDJ STAFF
The National Association of Home Builders’ (NAHB) Eye on Housing demonstrated that though the “single-family homes have been generally getting larger,” the average lot size has decreased over the years. For instance, from 1992-1995, “[t]he median lot size of a new single-family detached home sold was an even 10,000 square feet.” However, by 2004, lot size had decreased to 8,833 square feet. It bounced up to 9,000 and then came down again. In 2013, median lot size was 8,720 square feet. Read the court decision
Read the full story...
Reprinted courtesy of

Will Superusers Future-Proof the AEC Industry?

May 13, 2019 — Aarni Heiskanen - AEC Business
Design professionals who leverage tools and technology and, at the same time, have people skills, are essential to the future of the industry. They are Superusers, the protagonists of the latest book by Randy Deutsch. Randy Deutsch is an architect, educator, workshop leader, writer, and international keynote speaker. I had a chance to interview him about his book, Superusers: Design Technology Specialists and the Future of Practice. First, I was curious to know why he chose this topic for his fourth book. He explains: “Right now, it made a lot of sense to focus on the individual, not focus on collaboration and building teams, and really define what each individual team member should be.” Who Are Superusers? IT, technology, and tool specialists are typically experts in a relatively narrow field. Designers, especially architects, must have a wider perspective. Superusers are design technologists; liaisons between business needs and technology solutions. They demonstrate certain skillsets and mindsets. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES