Fairfield Connecticut Building Expert Directory

5 Impressive Construction Projects in North Carolina

February 04, 2014 — Melissa Dewey Brumback – Construction Law in North Carolina
What are your top construction building projects in North Carolina? Do you have a “short list”? Author Ralitsa Golemanova of JW Surety Bonds does, and she has the reasoning behind them. Ralista’s Top 5, which all “present a different facet of exceptional modern design and construction” are presented below. For her full commentary and some great pictures of the projects, check out her full article. Her list, in no particular order, includes: 1. The North Carolina Museum of Art’s West Building Expansion The 127,000 square-feet West Building Expansion of the North Carolina Museum of Arts won the 2011 American Institute of Architects (AIA) Honor Award for Architecture. The Building is largely made of aluminum panels. One of its specificities is that it does not have any windows. Instead, visibility is ensured through 360 skylights that allow delicate natural light to enter the inner galleries. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Construction Law in North Carolina
Ms. Brumback can be contacted at mbrumback@rl-law.com

Seattle Crane Strike Heads Into Labor Day Weekend After Some Contractors Sign Agreements

September 25, 2018 — Christine Kilpatrick - Engineering News-Record
A continuing construction worker strike in Seattle and Western Washington state headed into Labor Day weekend after a number of contractors signed individual agreements to return to work. Read the court decision
Read the full story...
Reprinted courtesy of Christine Kilpatrick, ENR
Ms. Kilpatrick may be contacted at kilpatrickc@enr.com

Hawaii Federal District Court Again Rejects Coverage for Faulty Workmanship

January 13, 2017 — Tred R. Eyerly - Insurance Law Hawaii
The federal district court for the District of Hawaii continued its longstanding pattern of finding no coverage for claims based upon construction defects. Am. Auto. Ins. Co. v. Haw. Nut & Bolt, 2016 U.S. Dist. LEXIS 174243 (D. Haw. Dec. 16, 2016). Safeway filed a complaint against Hawaii Nut & Bolt (HNB). The complaint involved issues pertaining to the construction of the roof deck at a Safeway store. HNB was a subcontractor hired to supply a coating system on the roof of the store to make it waterproof. The product was manufactured by VersaFlex. After the store opened, there were water leaks from the roof. This disrupted business operations and caused damage to Safeway's business and reputation. HNB tendered the claims to its CGL carrier, Fireman's Fund Insurance Corporation (FFIC). FFIC defended the underlying lawsuit for six years under a reservation of rights. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Augmented and Mixed Reality in Construction

July 28, 2016 — Aarni Heiskanen - AEC Business
Augmented reality (AR) and mixed reality (MR) are in the headlines, thanks to the recent mobile gaming boom. How are these emerging technologies applicable to construction? In this blog post, I present six application areas to consider. In AR—like Google Glass or Pokémon GO on a mobile device—the visible natural world is overlaid with a layer of digital content. In MR technologies, like Microsoft’s HoloLens or Magic Leap, virtual objects are integrated into and responsive to the natural world. In my earlier post, I wrote about virtual reality (VR), where the real world is replaced by a computer-generated environment. All the virtual technologies are still in relatively early stages of development. However, they already demonstrate the potential to change how we design, build, commercialize, and use the built environment. I brainstormed six application areas for AR and MR in construction. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aarni@aepartners.fi

Standard of Care

December 16, 2019 — Jay Gregory - Gordon & Rees Construction Law Blog
One of the key concepts at the heart of Board complaints and civil claims against a design professional is whether or not that design professional complied with the applicable standard of care. In order to prevail on such a claim, the claimant must establish (typically with the aid of expert testimony) that the design professional deviated from the standard of care. On the other side of the coin, to defend a design professional against a professional malpractice claim, defense counsel attempts to establish that – contrary to the claimant’s allegations – the design professional, in fact, complied with the standard of care. Obviously, it becomes very important in such a claim situation to determine what the standard of care is that applies to the conduct of the defendant design professional. Often, this is easier said than done. There is no dictionary definition or handy guidebook that identifies the precise standard of care that applies in any given situation. The “standard of care” is a concept and, as such, is flexible and open to interpretation. Traditionally, the standard of care is expressed as being that level of service or competence generally employed by average or prudent practitioners under the same or similar circumstances at the same time and in the same locale. In other words, to meet the standard of care a design professional must generally follow the pack; he or she need not be perfect, exemplary, outstanding, or even superior – it is sufficient merely for the designer to do that which a reasonably prudent practitioner would do under similar circumstances. The negative or reverse definition also applies, to meet the standard of care, a practitioner must refrain from doing what a reasonably prudent practitioner would have refrained from doing. Although we have this ready definition of the standard of care, in any given dispute it is practically inevitable that the parties will have markedly different opinions as to: (1) what the standard of care required of the designer; and (2) whether the defendant design professional complied with that requirement. The claimant bringing a claim against a design professional typically will be able to find an expert reasonably qualified (at least on paper) who will offer an opinion that the defendant failed to comply with the standard of care. It is just as likely that the counsel for the defendant design professional will be able to find his or her own expert who will counter the opinion of the claimant’s expert and maintain that the defendant design professional, in fact, complied with the standard of care. What’s a jury to think? The concept of standard of care is intertwined with the legal concept of negligence. In the vast majority of law suits against design professionals, a claimant (known as the plaintiff) will assert a claim for negligence against the design professional now known as the defendant.1 As every first year law student learns while studying the field of “Torts,” negligence has four subparts. In order for a defendant to be found negligent, the claimant must establish four elements: (1) duty; (2) breach; (3) causation; and (4) damages. In other words, to establish a claim against a defendant design professional, a plaintiff must demonstrate that the defendant owed the plaintiff a duty of care but breached that duty and, as a result, caused the plaintiff to suffer damages. Read the court decision
Read the full story...
Reprinted courtesy of Jay Gregory, Gordon & Rees Scully Mansukhani
Mr. Gregory may be contacted at jgregory@grsm.com

World Green Building Council Calls for Net-Zero Embodied Carbon in Buildings by 2050

November 18, 2019 — Nadine M. Post - Engineering News-Record
The World Green Building Council’s latest maneuver in its war against greenhouse gas emissions is a rallying cry for embodied-carbon reduction in buildings that involves global collaboration, communication, education, innovation and regulation. WGBC’s ambitious aim is to get to net-zero EC in all new construction and renovations by 2050. Reprinted courtesy of Nadine M. Post, Engineering News-Record Ms. Post may be contacted at postn@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

New World Cup Stadiums Failed at their First Trial

March 12, 2014 — Beverley BevenFlorez-CDJ STAFF
Problems abounded at the inaugural match at one of the new World Cup stadiums in Manaus, Brazil, reported The News Tribune. Problems also were reported at the Arena da Amazonia. Bathrooms weren’t completed, roofs leaked, and some fans were sold tickets for seats that didn’t exist. Furthermore “construction material could be seen in some places and many wheelchair fans had difficulties accessing their seats.” "This is a critical point that needs to be reevaluated, it can't happen again," said Miguel Capobiango, one of the officials in charge of World Cup preparations in Manaus, as quoted by The News Tribune. "But this is why we have these test events." Read the court decision
Read the full story...
Reprinted courtesy of

Teaming Agreements- A Contract to Pursue a Solicitation and Negotiate

November 23, 2020 — David Adelstein - Florida Construction Legal Updates
Teaming agreements are practical and useful agreements on public projects where a prime contractor teams with a subcontractor for purposes of submitting a bid or proposal in response to a solicitation. The prime contractor and subcontractor work together to pursue that solicitation and have the government award the contract to the prime contractor. The teaming agreement allows for information to be confidentially shared (estimating and pricing, construction methodologies, systems, and suggestions, value engineering, etc.) where the subcontractor agrees that it will only pursue the solicitation with the prime contractor. In other words, the subcontractor ideally is not going to submit pricing to another prime contractor proposing or bidding on the same project and is not going to share information the prime contractor has furnished to it. Likewise, the prime contractor is not going to use the subcontractor’s information for purposes of finding another subcontractor at a lower price and is agreeing to use its good faith efforts or best attempts to enter into a subcontract with the subcontractor if it is awarded the project. This is all memorialized in the teaming agreement. The potential problem lies with language that requires the parties to use their good faith efforts or best attempts to enter into a subcontract if the project is awarded to the prime contractor. In essence, this can become a disfavored “agreement to agree” to a future contract that could allow either party to create an argument to back out of the deal under the auspice that they could not come to terms with the subcontract. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES