Before Celebrating the Market Rebound, Builders Need to Read the Fine Print: New Changes in Construction Law Coming Out of the Recession
November 26, 2014 —
Alan H. Packer - Newmeyer & Dillion, LLPAs the homebuilding market continues to improve, many builders find themselves maneuvering familiar roads. That said, important new realities have taken hold since the market collapse. Navigating these changes requires extra thought for practical and legal reasons.
Using Old Designs “Off the Shelf”?
The adoption of the California Building Standards Code in 2010, with an updated schedule to go into effect January 1, may complicate the use of older designs. In addition, some builders are contemplating building on pads constructed five or more years ago, temporarily shelved until market conditions improved. Because of changes in both the applicable Code and due to possible changes in the underlying soils and drainage, these projects require additional scrutiny before starting construction.
Mechanic’s Lien Law Changes
Not too long ago, the California Legislature recently overhauled the entire mechanic’s lien law system in California. New forms, new statutory references, new rules and deadlines are all applicable to projects under construction now. Make sure your documents are up to date, as the use of older forms (particularly for liens, progress payments, and final payments) could create legal problems in the future.
Indemnity Law Changes
Since 2006, California lawmakers have passed four rounds of legislation aimed at limiting indemnity provisions in construction contracts. The laws are aimed at two aspects of indemnity law: “Type 1” indemnity provisions, and liability for the costs of defending a claim.
Type 1 Indemnity. California law previously permitted a builder to obtain “Type 1” indemnity from its subcontractors for all claims. Under a Type 1 provision, if a claim arose out of the trade’s work, the trade was fully responsible to defend and indemnify the builder – even if other trades or the Builder were partially at fault. Some cases even allowed, typically in a commercial context, the builder to obtain Type 1 indemnity even if the trade was not negligent, as long as the claim involved its work.
Defense Obligation. In 2008, California’s highest court issued an opinion in Crawford v. Weather Shield, evaluating an indemnity provision requiring trade (a window supplier/manufacturer) to defend the builder in claims involving allegations of damages arising out of the trade’s work. Because the trade had contractually agreed to defend the builder, the Court held it responsible for the builder’s defense costs -- even though, ultimately, the trade was found
not liable for the actual damages claimed.
Recent legislation after Crawford has dramatically shifted how indemnity provisions will be enforced. Builders may no longer obtain Type 1 indemnity for residential construction defect claims covered by SB800; instead, indemnity is limited to the extent a claim arises out of the trade’s work. Even more recent legislation applied these changes to claims arising out of commercial construction projects. The recent legislation allows the trades “options” on how to defend the builder, with an eye toward requiring that they pay only a “reasonably allocated” portion for the builder’s defense costs.
Smart builders are refining their contract documents to take into account these new limitations on indemnity provisions.
Insurance Market Changes
Due to uncertainties in subcontractor insurance and other factors, many builders have also converted their liability insurance from a “bring your own” model to “wrap-up” insurance, where the builder’s policy also covers their trades. Builders should carefully examine their subcontracts in light of this change as well.
Trade Partner Changes
On a practical level, many trade partners, particularly in the residential sector, have gone out of business or moved on to greener pastures. Builders need to find and negotiate contracts with new trade partners on the fly, and educate them on the builders’ procedures for payment and construction.
SB800 documentation
A decade ago, most builders updated their purchase documents and subcontracts for California’s “Right to Repair Law” (also known as SB800), which set forth functionality standards for construction defects in residential housing, and procedures for resolving claims prior to litigation. Builders ramping up to meet market demand should examine how they implemented SB800 changes in contract documents. Issues to consider:
- Whether to opt out of -- or back into -- statutory procedures.
- Whether to include arbitration or judicial reference provisions to control where claims are litigated after the SB800 process.
- Re-training personnel to preserve SB800 rights, including sign-offs on purchase documentation and recordation of key documents.
- Recent Court of Appeal decisions have complicated the SB800 landscape, potentially opening the door to “common law” tort claims in at least subrogation contexts. Strategic planning at the document stage may be a good way to mitigate this risk as the cases wind their way through the judicial process.
The continuing surge in building activity is a welcome sign for builders who have weathered the storm. Before taking too many steps, builders should consult with counsel, their designers, and their insurance advisors to take into account the new realities of this recovering housing market.
About the Author
Alan H. Packer is a partner in the expanding Walnut Creek, CA, office of the law firm of
Newmeyer & Dillion LLP whose specialties include real estate, insurance, and construction litigation. To reach Alan, call 925.988.3200 or email him at alan.packer@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
New York Court Enforces Construction Management Exclusion
March 14, 2018 —
Traub Lieberman Straus & Shrewsberry LLPIn its recent decision in
Houston Cas. Co. v. Cavan Corp. of NY, Inc., 2018 N.Y. App. Div. LEXIS 1138 (N.Y. 1st Dep’t Feb. 20, 2018), a New York appellate court had occasion to consider the application of a construction management exclusion in a general liability policy.
Read the court decisionRead the full story...Reprinted courtesy of
Traub Lieberman Straus & Shrewsberry LLP
Leonard Fadeeff v. State Farm General Insurance Company
September 21, 2020 —
Michael Velladao - Lewis BrisboisIn Fadeeff v. State Farm Gen. Ins. Co., 50 Cal.App.5th 94 (May 22, 2020), the California Court of Appeal reversed the entry of summary judgment in favor of State Farm General Insurance Company (“State Farm”) in connection with a smoke and soot damage claim made by Leonard and Patricia Fadeeff (the “Fadeeffs”) for damage sustained by their home due to the 2015 Valley Fire. The parties’ dispute arose out of the Valley Fire, which took place in Lake County, California. The Fadeeffs’ home was located in Hidden Valley Lake.
The Fadeeffs submitted a claim to State Farm under their homeowners policy. Initially, after an adjuster inspected the home and noted that it was “well maintained” with no apparent maintenance issues, State Farm made a series of payments and arranged for ServPro to clean the smoke and soot damage. Subsequently, the Fadeeffs retained an independent adjuster and submitted a supplemental claim in the amount of $75,000. State Farm retained a different unlicensed adjuster to investigate the claim and retained expert, Forensic Analytical Consulting Services (FACS) to inspect the Fadeeffs’ home, and another company referred to as HVACi, to inspect the Fadeeffs’ HVAC system.
The independent adjuster used to investigate the Fadeeffs’ supplemental claim failed to follow company guidelines in connection with using experts, which required specific questions to be addressed by the expert. In addition, FACS only took surface samples of the walls in the Fadeeffs’ home. Ultimately, the reports prepared by FACS and HVACi concluded that no additional work was required to remediate the damage sustained by the Fadeeffs’ home. Thereafter, State Farm denied the Fadeeffs’ supplemental claim.
Read the court decisionRead the full story...Reprinted courtesy of
Michael Velladao, Lewis BrisboisMr. Velladao may be contacted at
Michael.Velladao@lewisbrisbois.com
Risk Transfer: The Souffle of Construction Litigation
December 13, 2022 —
Alexa Stephenson & Ivette Kincaid - Kahana FeldWho does not love a good souffle?! Enthusiasts will know that a great souffle is not something you can obtain quickly. Rather, it is common in restaurants to order the souffle as dessert at the beginning of the meal because it takes an hour to bake. Risk transfer – like a good souffle – also requires planning, preparation, and the right ingredients.
In construction litigation, attorneys are often not retained until after the project has been completed for several years as the dispute between the homeowner and the general contractor or developer took time to escalate to formal litigation. A significant part of defense counsel’s legal analysis involves assessing and evaluating risk transfer opportunities. For example, in the case of a general contractor or developer who did not self-perform the construction work but instead retained subcontractors to do so, counsel will assess if risk can be transferred from the general contractor or developer to the subcontractors who performed the work which the homeowners allege is defective. In other words, a developer or general contractor can reduce their risk (i.e. liability and money owed) by transferring said risk (i.e. pointing the finger at) to a third party.
Sounds easy, right? Unfortunately, just like the souffle making process, it is easier said than done. This task can be exceedingly difficult in the absence of contracts that contain strong indemnity and insurance provisions – the essential ingredients to effect risk transfer. Worry not! We have provided “baking” instructions for you below to help you get a great risk transfer souffle time and again.
Reprinted courtesy of
Alexa Stephenson, Kahana Feld and
Ivette Kincaid, Kahana Feld
Ms. Stephenson may be contacted at astephenson@kahanafeld.com
Ms. Kincaid may be contacted at ikincaid@kahanafeld.com
Read the court decisionRead the full story...Reprinted courtesy of
Construction Payment Remedies: You May be Able to Skate by, But Why?
April 06, 2016 —
Garret Murai – California Construction Law BlogMy grandfather used to say that “anything worth doing, is worth doing well.”
It wasn’t until later that I learned the quote wasn’t his, but a quote from Philip Stanhope the Fourth Earl of Chesterfield, who said in his posthumously published and quite lengthily titled Letters to His Son on the Art of Becoming a Man of the World and a Gentleman, that “whatever is worth doing at all, is worth doing well.” I’m not sure where my grandfather, who wasn’t a man of letters, picked up this quote, but I like his version better.
While “anything worth doing, is worth doing well” can be said to apply to a wide variety of things in life, including living itself, it applies equally to the world of construction payment remedies, which have requirements that are both detailed and deadline driven.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com
Quick Note: Mitigation of Damages in Contract Cases
October 02, 2018 —
David Adelstein - Florida Construction Legal UpdatesIn an earlier article, I discussed an owner’s measure of damages when a contractor breaches the construction contract. This article discussed a case where the contractor elected to walk off a residential renovation job due to a payment dispute when he demanded more money and the owners did not bite. This case also discussed the commonly asserted defense known as mitigation of damages, i.e., the other party failed to properly mitigate their own damages.
In the breach of contract setting, mitigation of damages refers to those damages the other side could have reasonably avoided had he undertaken certain (reasonable) measures. This is known as the doctrine of avoidable consequences.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
Medical Center Builder Sues Contracting Agent, Citing Costly Delays
March 19, 2014 —
Beverley BevenFlorez-CDJ STAFFThe Pennsylvania firm Bedwell Co. “has sued the Camden County Improvement Authority, saying it is owed $4.6 million for construction of [the Cooper Medical School of Rowan University]” in Camden, New Jersey, according to the Courier-Post. The Bedwell Co. alleges that its expenses exceeded fifty million, “but that it has been paid only $46 million.”
The lawsuit states, as quoted by the Courier-Post, “From its inception, the project was plagued by delays due to defects in the design document and other circumstances that were beyond Bedwell’s control.” Furthermore, there were “an abnormally large quantity of design changes, schedule disputes, schedule disruptions and work-activity interference.”
“Representatives of the CCIA and HDR could not be reached for comment Wednesday,” according to the Courier-Post. “Bedwell declined to comment on the allegations in the suit.”
Read the court decisionRead the full story...Reprinted courtesy of
Be a Good Neighbor: Techniques to Mitigate the Risk of Claims from Adjacent Landowners
December 07, 2020 —
Joshua Levy, Josh Neudorfer & Madeleine Bailey - Construction ExecutiveIn May 2020, a real estate developer performing excavation work in New York was sued by a neighboring property owner for property damage. A court overturned an injunction preventing the developer from continuing excavation work after reviewing a preconstruction assessment that showed the damage to the neighboring property was preexisting—not caused by the excavation (see Feldman v. 3588 Nostrand Ave. LLC as an example)
A preconstruction assessment is one of the most important tools in the arsenal of a developer protecting itself from neighbors bringing claims for property damage. Part two of this series will review the benefits of risk mitigation tools recommended for developers such as postconstruction assessments and monitoring during construction.
Preconstruction Assessment Overview
A preconstruction assessment is a review of a property adjacent to a site where demolition and/or construction activities are to take place. The goal of the assessment is to establish baseline conditions by conducting an inspection of buildings and infrastructure, including identification of existing damage to improvements, so that causation of any alleged damages can be more easily determined.
Reprinted courtesy of
Joshua Levy, Josh Neudorfer & Madeleine Bailey, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Levy may be contacted at joshua.levy@huschblackwell.com
Mr. Neudorfer may be contacted at jneudorfer@thesigmagroup.com
Read the court decisionRead the full story...Reprinted courtesy of
