Fairfield Connecticut Building Expert Directory

Sales of New Homes in U.S. Increased 5.4% in July to 507,000

August 26, 2015 — Shobhana Chandra – Bloomberg
Purchases of new homes in the U.S. rebounded in July, bolstering signs the real-estate market is picking up. Sales climbed 5.4 percent, the biggest gain this year, to a 507,000 annualized pace from a 481,000 rate in the prior month, a Commerce Department report showed Tuesday in Washington. The median forecast of 75 economists surveyed by Bloomberg called for 510,000. Demand had declined 7.7 percent in June. Demand for new properties is likely to keep expanding amid strong employment, low borrowing costs and a lack of available existing homes from which to choose. The improving outlook may spur more residential construction, contributing to the economic expansion in the second half of the year. Read the court decision
Read the full story...
Reprinted courtesy of

Portions of Policyholder's Expert's Opinions Excluded

November 13, 2023 — Tred R. Eyerly - Insurance Law Hawaii
The federal district court granted, in part, the insurer's motion to exclude portions of expert testimony. Tundra M. Holdings, LLC v. Markel Ins. Co., 2023 U.S. Dist. LEXIS 139952 (D. Alaska Aug. 10, 2023). Plaintiff alleged a building it owned suffered damages consisting of building roof failure due to snow load. Plaintiff submitted a claim to Markel for its loss. Plaintiff hired an engineering firm to conduct an inspection. The recommendation was to install snow guards and that 28 rafters be replaced with new beams. The evaluation did not state that the recommendation was required by law or ordinance. Nor did the evaluation make mention of replacing the metal roof on the building or anything about the water system or sprinkler system. Plaintiff then obtained an estimate of $687,500 for roof repair/replacement, store front repair, a sprinkler system installer and a water system upgrade. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Property Owner Found Liable for Injuries to Worker of Unlicensed Contractor, Again

September 17, 2018 — Garret Murai - California Construction Law Blog
It’s not like we didn’t warn you. In Jones v. Sorenson, Case No. C084870 (August 2, 2018), homeowner Danita Sorenson discovered to her chagrin that she had unwittingly become the employer of Mary Jones, who had been hired by Odette Miranda doing business as Designs by Leo to trim some trees, and was liable for Jones’ injuries when Jones fell off a ladder provided by Miranda. “How can this be?” you might ask. The reason, as it turns out, is simple. Miranda was required to hold a Class D-49 Tree Service Contractor’s license in order to contract with Sorenson to trim her trees, and because Miranda did not hold that license (or, for that matter, any contractor’s license), Sorenson automatically was deemed the employer of Jones under Labor Code Section 2750.5 and, therefore, liable for her injuries. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel, Rosen, Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Construction Wall Falls, Hurts Three

November 06, 2013 — CDJ STAFF
A construction wall collapsed on November 1 during heavy rainfall in New York City. Two women were briefly trapped under the rubble, while other bystanders worked to free them. Einstein Construction Group, a contractor based in Texas, was remodeling the first floor for a new tenant, a Japanese restaurant. The company, which disclaims responsibility for the occurrence, were cited for violations and a stop work order was issued. Just prior to the incident, high winds whipped through the area. The construction wall allegedly had not been securely attached to the building. Read the court decision
Read the full story...
Reprinted courtesy of

Are Proprietary Specifications Illegal?

April 11, 2018 — Wally Zimolong – Supplemental Conditions
A friend came to me with a question regarding a case he was working: “can a public owner require that bidders use a specific brand name product?” “Of course not,” I said “proprietary specifications are illegal.” Or, at least that’s what I assumed. To my surprise, the law in the Commonwealth of Pennsylvania is not as clear as it is in other jurisdictions. What is a proprietary specification? A proprietary specification lists a product by brand name, make, model and/model that a contractor must (shall) utilize in construction. A basic example of a proprietary specification would state:

“Air Handlers shall be “Turbo Max” as manufactured by Chiller Corp.”

There are two problems with a proprietary specification (other than potentially being illegal): (a) they limit competition, and (b) invite steered contract awards. They limit competition because it limits the type of material that can be used on the project. In the example above, there could be equivalent air handlers available at a better price but the contractor could not use that lower priced product in its bid. Thus, the taxpayers end up paying more for tile. Also, contractors may not be able to secure a certain brand name product because of exclusive distribution agreements. Again, using the example above, contractor A’s competitor may have the exclusive distribution agreement with Chiller Corp. Read the court decision
Read the full story...
Reprinted courtesy of Wally Zimolong, Zimolong LLC
Mr. Zimolong may be contacted at wally@zimolonglaw.com

Jason Smith and Teddie Arnold Co-Author Updated “United States – Construction” Chapter in 2024 Legal 500: Country Comparative Guides

May 28, 2024 — Jason Smith & Edward (Teddie) Arnold - The Construction Seyt
Jason Smith and Teddie Arnold, partners in Seyfarth’s Washington, DC office, have co-authored an updated “United States – Construction” chapter in the 2024 edition of The Legal 500: Country Comparative Guides. Seyfarth continues to participate as an exclusive contributor for this comprehensive overview of construction-specific laws and regulations in the United States. Topics covered include, but are not limited to, requirements and obligations, permits and licencing, procurement, financing and security, and disputes, as well as insight and opinion on current challenges and opportunities. To access and download a copy of the chapter, click here. Reprinted courtesy of Jason N. Smith, Seyfarth and Edward V. Arnold, Seyfarth Mr. Smith may be contacted at jnsmith@seyfarth.com Mr. Arnold may be contacted at earnold@seyfarth.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

FAA Plans Final Regulation on Commercial Drone Use by Mid-2016

June 17, 2015 — Rachel Adams-Heard and Alan Levin – Bloomberg
The Federal Aviation Administration intends to issue final regulations for operating small commercial drones by the middle of 2016, a top administrator told a U.S. House committee Wednesday. “The rule will be in place within the year,” FAA Deputy Administrator Michael Whitaker said at the House Oversight Committee hearing. He said, “hopefully before June 17, 2016.” While the FAA has previously said it was seeking to complete the rule as swiftly as possible, Whitaker’s comments in answering lawmakers’ questions are the most specific yet about timing. Reprinted courtesy of Rachel Adams-Heard, Bloomberg and Alan Levin, Bloomberg Read the court decision
Read the full story...
Reprinted courtesy of

The Five-Step Protocol to Reopening a Business

August 03, 2020 — Amy R. Patton & Rana Ayazi - Payne & Fears
Over the past few months, guidance on how to create a safer, low-risk workplace has frequently changed. Fortunately, the state of California has finally reached a point where comprehensive and concrete advice is now available. On June 24, 2020, the California Statewide Industry Guidance to Reduce Risk website was updated. In addition to providing industry-specific guidance and opening checklists for approximately 40 different industries, the website now unambiguously requires all businesses—regardless of which “phase” they reopen—to follow a five-step protocol (as described in greater detail throughout this article):

Perform a detailed risk assessment and create a site-specific protection plan.
Train employees on how to limit the spread of COVID-19. This includes how to screen themselves for symptoms and when to stay home.
Set up individual control measures and screenings.
Put disinfection protocols in place.
Establish physical distancing guidelines

Reprinted courtesy of Amy R. Patton, Payne & Fears and Rana Ayazi, Payne & Fears Ms. Patton may be contacted at arp@paynefears.com Ms. Ayazi may be contacted at ra@paynefears.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES