Canada Housing Starts Increase on Multiple-Unit Projects
October 08, 2014 —
Greg Quinn – BloombergCanadian housing starts rose 0.5 percent last month led by multiple-unit work, government figures showed.
Work started on 197,343 units at a seasonally adjusted annual pace in September, Ottawa-based Canada Mortgage & Housing Corp. said today, close to the 198,000 median forecast in a Bloomberg economist survey with 18 responses.
Multiple-unit projects such as condominiums and apartments rose 2.4 percent to 114,579 units. Single-family homes declined 2.9 percent to 62,440 units.
Canada may need tougher rules to slow gains in the housing market, the International Monetary Fund said yesterday. Much of the attention has focused on high prices and robust construction of condos in Vancouver and Toronto.
Read the court decisionRead the full story...Reprinted courtesy of
Greg Quinn, BloombergMr. Quinn may be contacted at
gquinn1@bloomberg.net
The New “White Collar” Exemption Regulations
August 19, 2015 —
Craig Martin – Construction Contractor AdvisorThis summer the Department of Labor’s Wage and Hour Division issued proposed changes to the white-collar overtime regulations under the Fair Labor Standards Act (FLSA). The white collar exemptions include the executive, administrative, professional, outside sales and computer employee exemptions. The focus of the proposed regulations is to increase the salary level required to qualify for the exemption from $23,660 per year to $50,440 per year. The DOL predicts this will cause employers to change the exempt status of nearly 5 million workers who are currently exempt from overtime requirements to non-exempt status – requiring the payment of overtime.
Current Regulations
Under today’s regulations, the white collar exemption applies to employees who are paid at least $455 per week ($23,660 per year) and who customarily and regularly perform any one or more of the exempt duties or responsibilities of an executive, administrative or professional employee.
Proposed Changes
The most significant change is the sizeable increase in the minimum salary requirements for the exemptions. The proposed regulations more than double the current minimum salary of $455 per week to $921. This corresponds to the 40th percentile of weekly earnings projected for the first quarter of 2016, based on the Bureau of Labor Statistics. The DOL also proposes annual adjustments to the minimum salary requirements.
Read the court decisionRead the full story...Reprinted courtesy of
Craig Martin, Lamson, Dugan and Murray, LLPMr. Martin may be contacted at
cmartin@ldmlaw.com
Executive Insights 2024: Leaders in Construction Law
August 05, 2024 —
Construction ExecutiveThe key risks that should always be taken into account when a contract is signed are risks associated with uncompensated delays and cost increases. Provisions relating to the scope of work deserve significant attention to help minimize these risks. Defining the scope of work is often put on the backburner while parties focus on negotiating the rest of the terms and conditions of the contract. And when these scopes are inserted, they are often not closely reviewed by attorneys who tend to defer to project personnel on scope. These situations can lead to costly disputes.
Instead, make sure: (1) the correct plans and specifications have been referenced in the contract; (2) an attorney or his/her business counterpart is familiar with relevant specifications; (3) the exhibit containing the assumptions and clarifications is clearly written, has been coordinated with language in the body of the contract and can be clearly understood by attorneys and business people beyond the preconstruction personnel who drafted them; and (4) the contract addresses the order of precedence in the event of a conflict between or among contract provisions (including exhibits). With regard to specifications referenced above, an attorney review is advised because many specification sections, including submittal sections, change order sections, payment provisions and construction progress documentation sections, regularly vary from the negotiated sections of the actual contract. Contractors also unwittingly accept design risk through performance specifications, and the accompanying obligations and risks are underestimated by those tasked with the initial review of those documents. In sum, a clear scope is as important as clear terms and conditions.
Reprinted courtesy of
Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
The Riskiest Housing Markets in the U.S.
June 26, 2014 —
Ben Steverman – BloombergThe real estate rollercoaster ride for U.S. homeowners isn't new. Some markets had even rockier rides in the early 1980s or '90s.
When so much wealth is tied up in one asset, the risk -- or stability -- of a local market can mean a lot to a homeowner. (See “The Hidden Risks in Your Housing Market” for more on this.)
Bloomberg.com asked real estate website Zillow.com to help us figure out which U.S. markets have been the riskiest over the last 35 years.
Our measure of risk: Assuming buyers held on to their homes for five years before selling, what was their chance of suffering a loss? As a secondary criterion, we compared the worst annual losses homeowners in these markets have experienced since 1979.
Read the court decisionRead the full story...Reprinted courtesy of
Ben Steverman, BloombergMr. Steverman may be contacted at
bsteverman@bloomberg.net
Enerpac Plays Critical Role in Industry-changing Discovery for Long Span Bridges at The University of Nebraska-Lincoln
April 19, 2022 —
EnerpacMENOMONEE FALLS, Wis. (April 18, 2022) – Three years ago when Marc Maguire, assistant professor of construction programs at the University of Nebraska-Lincoln, started investigating a new stranded wire product for bridge girder reinforcing he thought the best strands for bridge construction were the industry standard 7-wire strands.
After running a multitude of analyses, Maguire and student researchers found that 19-wire 1-1/8 in. diameter strands outperform the typical 7-wire 1-1/6 in. diameter strands and allow bridges to reach unprecedented lengths. Further tests conducted by the Durham School of Architectural Engineering and Construction with the help of Enerpac hydraulic tools examined the bond strength, force transfer, and development length of the 19-wire strands.
"Traditionally, 19-wire strands are not often used in the U.S. because they are not widely available and they are much larger than standard strands," said Maguire. "We wanted to show that there was an alternative option to the common 7-wire strand--one that can perform at the same level, if not better."
About Enerpac
Enerpac is a global market leader in high pressure hydraulic tools, controlled force products, portable machining, on-site services and solutions for precise positioning of heavy loads. As a leading innovator with a 110-year legacy, Enerpac has helped move and maintain some of the largest structures on earth. When safety and precision matters, elite professionals in industries such as aerospace, infrastructure, manufacturing, mining, oil & gas and power generation rely on Enerpac for quality tools, services and solutions. For more information, visit www.enerpac.com.
Read the court decisionRead the full story...Reprinted courtesy of
Ohio Court Finds No Coverage for Construction Defect Claims
March 28, 2012 —
Tred R. Eyerly - Insurance Law HawaiiCharles and Valerie Myers hired Perry Miller to build their home. Myers v. United Ohio Ins. Co., 2012 Ohio App. LEXIS 287 (Ohio Ct. App. Jan. 26, 2012). After completion of the home, Miller was again hired to construct an addition which included a full basement, staircases, bathroom, bedroom, hallway and garage.
After the addition was completed, one of the basement walls began to crack and bow. Miller began to make repairs, but eventually stopped working on the project. Other contractors were hired to make repairs, but further problems developed. A second basement wall began to bow and crack, allowing water into the basement. The wall eventually had to be replaced. Subsequently, the roof over the addition began to leak in five or six places before the drywall could be painted. The leaks caused water stains on the drywall and caused it to separate and tear. It was discovered the roof needed to be replaced.
The Myers sued Miller and his insurer, United Ohio Insurance Company. The trial court ruled that the policy did not provide coverage for faulty workmanship, but did provide coverage for consequential damages caused by repeated exposure to the elements. United Ohio conceded liability in the amount of $2,000 to repair water damage to the drywall. United Ohio was also found liable for $51,576, which included $31,000 to repair the roof and ceiling and $18,576 to replace the basement wall.
Read the full story…
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii. Mr. Eyerly can be contacted at te@hawaiilawyer.com
Read the court decisionRead the full story...Reprinted courtesy of
Resolving Subcontractor Disputes with Pass-Through Claims and Liquidation Agreements
May 13, 2024 —
Stephanie Cooksey - Peckar & Abramson, P.C.Imagine a project where you are unable to reach final completion due to an unresolved subcontractor claim. If the project owner is responsible for the claim, and both the owner and subcontractor are entrenched in their positions, how would you resolve this dispute?
The default option is a three-party lawsuit where the subcontractor sues you in your capacity as general contractor. By denying the claim, you bring the owner into the lawsuit as a liable party to the subcontractor’s claim. This option is efficient from the judicial system’s perspective, as it means one lawsuit instead of two. The subcontractor cannot sue the owner since the two have no contract between them. Thus, the subcontractor’s recourse is limited to suing the contractor. In the three-party lawsuit, you argue that if the subcontractor prevails in its claim against you, the owner is liable. If the owner successfully defends against the claim, the subcontractor takes nothing.
Putting judicial economy aside, it may not make economic sense for contractors to have a lawyer involved in litigating a case where they have no skin in the game. Fortunately, there is a better option than the three-party lawsuit on multi-party construction projects.
Read the court decisionRead the full story...Reprinted courtesy of
Stephanie Cooksey, Peckar & Abramson, P.C.Ms. Cooksey may be contacted at
scooksey@pecklaw.com
Used French Fry Oil Fuels London Offices as Buildings Go Green
December 10, 2015 —
Siobhan Wagner – BloombergPricewaterhouseCoopers LLP’s office above Charing Cross railway station in London is cooled, heated and fueled by an unlikely source: used cooking oil.
The system, which helped the property become the greenest building in the U.K. capital, uses oil refined less than two miles away at London Bridge. It also helps prevent an invisible problem: “fatbergs” formed when oils dumped in drains and pipes congeal with baby wipes and diapers and block the city’s sewers.
“We’re using London’s waste to fuel a London office building,” said Jon Barnes, head of building at PwC. The system contributed toward a one-third reduction in electricity costs after a two-year refurbishment of the One Embankment Place office building that finished last year.
Read the court decisionRead the full story...Reprinted courtesy of
Siobhan Wagner, Bloomberg