SEATTLE WASHINGTON BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Lost Rental Income not a Construction Defect

November 27, 2013 — CDJ STAFF
A judge in Colorado has ruled that although the homeowner’s policy excluded construction defects from coverage, lost rental income and the cost of deck repair involved in fixing a defective drainage system were. Read the court decision
Read the full story...
Reprinted courtesy of

---

Virginia Decision Emphasizes Importance of Naming All Necessary Parties

June 17, 2015 — Beverley BevenFlorez-CDJ STAFF
Nate Budde on the Construction Payment Blog, discussed the potential of mechanics liens, and the pitfalls that occur when not all necessary parties are named. Budde analyzed the case Johnson Controls Inc. v. Norair Eng’g Corp. that involved a “claimant’s failure to name all the necessary parties in his claim against a bond,” resulting “in the claimant losing his claim against the bond, and with it, an opportunity to get paid.” Budde concluded, “Unfortunately, as was the case here, when the bond claim is not handled correctly procedurally, a party can be left with no recourse for payment. It’s important to understand which of the parties involved should be named in both mechanics lien claims and bond claims.” Read the court decision
Read the full story...
Reprinted courtesy of

---

Will the Hidden Cracks in the Bay Bridge Cause Problems During an Earthquake?

June 26, 2014 — Beverley BevenFlorez-CDJ STAFF
Despite a “no cracks” welding code and contract provision for the San Francisco-Oakland Bay Bridge, in 2008 Caltrans proceeded with the project despite welding cracks created by the Chinese firm hired to build the roadway, according to the Sacramento Bee. By the time the cracks had been discovered, the costs were at $6.5 billion and climbing, and fixing the cracks would be time-consuming and expensive. However, there is some dispute as to rather the welding “cracks represent a hazard to the traveling public.” “Examine history,” Brian Maroney, Caltrans’ chief engineer for the bridge, said in a recent interview by the Sacramento Bee. “… Caltrans reviewed major quakes around the globe and never found a case in which weld cracks caused bridge-roadway fractures.” However, the Sacramento Bee reported that there was a case where welding cracks led to fractures. For instance, after the southern California earthquake in 1994 centered in Northridge, the Santa Clara River Bridge “suffered several fractures in steel girders. The breaks were traced to tiny cracks in welds, likely present before the quake, and worsened by vibrations of heavy trucks passing overhead. When the quake struck, the girders fractured.” The Santa Clara bridge did not collapse. Sacramento Bee claimed it remained standing because the I-beam-shaped girders were “not fracture-critical.” However, the Bay Bridge’s “roadway consists of box-girder segments welded together. In effect, they create one contiguous, fracture-critical girder,” Abolhassan Astaneh-Asl, UC Berkeley engineering professor told the Sacramento Bee. “If welds crack and grow rapidly during a large quake, the entire roadway could fail.” Read the court decision
Read the full story...
Reprinted courtesy of

---

How to Protect a Construction-Related Invention

May 10, 2021 — Patrick Barthet - Construction Executive
They say necessity is mother of invention. That was surely true for Johan Vaaler, who in 1899 decided he was tired of having to sew pages together to keep them organized. Voila, enter the paper clip. This wasn’t the case for Percy Spencer. He was a radar tube designer working at Raytheon who, while working in front of an active radar set, noticed the candy bar in his pocket started to melt. Exploring the phenomenon further, he placed corn kernels in front of the radar and behold, he ended up with the world’s first microwaved popcorn. He patented the microwave oven in 1945. Whether by necessity or by accident, what should contractors do if they develop a unique tool to accomplish some portion of their work faster, easier or less expensively? How do they protect it from misappropriation by competitors, or by an errant employee? We are all familiar with the fact that in today’s internet-driven market, it has become very easy to reverse engineer and knock off an innovative product. The best way to safeguard an invention is, of course, to register it with the appropriate government agency:the United States Patent and Trademark Office (USPTO). Generally done with the assistance of a patent lawyer, the process is neither inexpensive or abbreviated. It could cost several thousand dollars and take 12 to 18 months. But, more importantly, this is not sufficient. Inventors must regularly monitor their patents to police possible infringers. Many folks think the USPTO does this, but it does not. Reprinted courtesy of Patrick Barthet, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Barthet may be contacted at pbarthet@barthet.com

---

Rio Olympics Work Was a Mess and Then Something Curious Happened

April 06, 2016 — Jonathan Levin, Tariq Panja & David Biller – Bloomberg
In early 2014, a senior Olympic Committee official returned from a trip to Rio de Janeiro and declared Brazil’s preparations for the Summer Games to be the worst he’d ever seen. In the two years since, a crippling recession set in, dozens of construction executives were ensnared in a nationwide corruption scandal and the president has been pushed to the brink of impeachment. And the preparations? They’re basically fine now, actually. In what is emerging as a rare bright spot in a country buffeted by crisis on all sides, the organizing committee is saying that more than 95 percent of the venues are complete some four months ahead of the opening ceremony and, what’s more, data shows spending has largely remained under control. Reprinted courtesy of Bloomberg reporters Jonathan Levin, Tariq Pania and David Biller Read the court decision
Read the full story...
Reprinted courtesy of

---

Real Estate & Construction News Roundup (10/1/24) – Hybrid Work Technologies, AI in Construction and the Market for Office Buildings

November 05, 2024 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law Blog
In our latest roundup, commercial mortgage bond market in trouble, commercial real estate investments, pressure on mortgage REITs, and more!

• Short-term issues facing U.S. commercial real estate have made it an investment opportunity and values have bottomed out. (CNBC)
• As organizations report plans to shake up their real estate portfolios, the flight to quality spurs interest in space planning, amenities and hybrid work technologies. (Joe Burns, Facilities Dive)
• The conversation about AI’s potential benefits and risks has been a common refrain in construction recently. (Matthew Thibault, Construction Dive)

Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team

---

Terminating A Subcontractor Or Sub-Tier Contractor—Not So Fast—Read Your Contract!

May 24, 2018 — John P. Ahlers - Ahlers Cressman & Sleight PLLC Blog
Every few months I receive a call from a general contractor or subcontractor who has just terminated a subcontractor or sub-tier contractor for non-performance and is “checking in with me to see if there are any liability issues.” After the termination has taken place, if the termination is wrongful, there are serious legal consequences. Calling your lawyer after the fact will not cure missteps in the termination process. Termination for non-performance is a common term in most contract documents. As courts interpret contracts, however, the right to earn revenue from a contract is a substantial interest, and courts generally “abhor” forfeitures (termination) of that right. In other words, the courts will strictly determine whether the terminating party to a contract has complied with the termination process to the letter. A recent example from Connecticut is instructive in this regard. [1] The general contractor on a large hospital project in Connecticut terminated its electrical subcontractor, hired others to finish the electrical subcontractor’s work, and then sued the electrical subcontractor for $26 million. The electrical subcontractor countersued the general contractor for $3.6 million of work that it had completed at the time of the termination which had not been paid for. The subcontractor claimed that due to the many changes that had occurred on the project, it stopped work because the changes altered the contract to the point that it was no longer the same contract. The subcontractor walked off the project and the general contractor then terminated the subcontractor and re-procured the work from other subcontractors. Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers Cressman & Sleight PLLC
Mr. Ahlers may be contacted at john.ahlers@acslawyers.com

---

Settlement Ends Construction Defect Lawsuit for School

October 02, 2013 — CDJ STAFF
The school district in the Chicago-area town of Lake Zurich has made last settlement in a construction defect lawsuit. The $80,000 settlement from Terra Group of Chicago brings the total settlement with the Community Unit School District 95 to about $1.9 million. Other firms included Bovis Lend Lease, Legat Architects, Larson Engineering, and Illinois Masonry Corporation. The school district had contracted for work on several schools in the district. The buildings opened in 2004, with defect claims made in 2007. Defect claims included the failure of a retaining wall and need for reinforcement of stairwells. The settlement with Terra Group was made under the agreement that it was a compromise with no concession of liability. Read the court decision
Read the full story...
Reprinted courtesy of

---