Fairfield Connecticut Building Expert Directory

Netherlands’ Developer Presents Modular Homes for Young Professionals

March 05, 2015 — Beverley BevenFlorez-CDJ STAFF
Builder Magazine reported that Heijmans, a development and building company based in The Netherlands, believes their new modular home, the Heijmans ONE, is a solution for young professionals looking for an affordable, urban option. “As a designer, I believe prefabricated architecture can beautifully balance quality, experience and economic feasibility,” the project's architect Tim van der Grinten, of Moodbuilders Architecture, told Builder Magazine. “The architecture of this compact house is characterized by natural materials, space, openness and identity. It is a clearly recognizable property that you can make your own.” Read the court decision
Read the full story...
Reprinted courtesy of

Tall Mass Timber Buildings Now Possible Under 2021 IBC Code Changes

February 03, 2020 — Kenneth Bland - Construction Executive
The International Code Council (ICC) has approved 17 changes to the 2021 editions of the International Building Code (IBC) and International Fire Code, allowing for mass timber buildings up to 18 stories. With the addition of three new mass timber construction types (Type IV-A, IV-B, and IV-C), this is the first time in the history of the modern building code that significantly new construction types have been added to the code. Building Materials The primary building material that makes tall mass timber (TMT) buildings possible is cross-laminated timber (CLT). CLT is manufactured from dimension lumber (nominal 2x lumber) laid side-by-side or mass plywood panels of a specified width. Laminations of lumber are typically laid perpendicular to each other to form panels of various thicknesses that are bonded together using heat resistant adhesives that cure in large hydraulic presses. CLT commonly consists of an odd number of laminations. These solid wood panels can be anywhere from 6 inches to 20 inches nominal thickness and 60 feet long. Typical CLT panels will be 6 inches to 14 inches nominal thickness. The panels are fabricated off site, transported onto the construction site and assembled in a manner that is efficient and remarkably fast. CLT panels can be used as floor, wall, or roof building elements supported by glued-laminated beams and columns. Reprinted courtesy of Kenneth Bland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Insurer Must Indemnify Additional Insured After Settlement

October 21, 2015 — Tred R. Eyerly – Insurance Law Hawaii
The court determined that Target was an additional insured under its supplier's policy and the insurer had a duty to indemnify Target after it settled the underlying suit. Selective Ins. Co. v. Target Corp., 2015 U.S. Dist. LEXIS 123230 (E.D. Ill. Sept. 15, 2015). Angela Brown sued Target when she was allegedly injured by a door to a fitting room that came unhinged and fell on her head. Harbor Industries, Inc. supplied Target with its fitting rooms. Pursuant to the "Supplier Qualification Agreement" (SQA), Harbor named Target as an additional insured under its policy with Selective Insurance Company. The SQA became effective and was to remain in effect until terminated by either party. A second agreement, the "Program Agreement," set forth the terms under which Harbor sold the fitting rooms to Target. The Program Agreement went into effect on April 23, 2009, and expired on July 1, 2010. Brown's injury occurred on December 17, 2011, while the SQA and the policy were in effect, but after the Program Agreement expired. After Brown's injury, Target tendered to Selective, who denied coverage, contending Target was not an additional insured. The policy's endorsement expanded insureds to any additional insured whom Harbor agreed in a written contract to add as an additional insured. Selective filed suit and the parties filed cross-motions for summary judgment. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

What ENR.com Construction News Gained the Most Views

January 09, 2023 — C.J. Schexnayder - Engineering News-Record
As the construction industry continued its ongoing recovery from the global pandemic in 2022, it also faced a number of formidable challenges—including staffing gaps, materials shortages, supply chain delays and the ongoing specter of inflation. Throughout the year, ENR editors reported on how these issues—and many more—were impacting the sector and how it responded. Reprinted courtesy of C.J. Schexnayder, Engineering News-Record Mr. Schexnayder may be contacted at schexnayderc@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Home Prices in 20 U.S. Cities Increase at Slower Pace

February 25, 2014 — Victoria Stilwell – Bloomberg
Home prices in the U.S. climbed at a slower pace in the year through December, pointing to a moderation in the market that will help keep more properties within reach for prospective buyers. The S&P/Case-Shiller index of property values in 20 cities rose 13.4 percent from December 2012 after increasing 13.7 percent in the year ended in November, the group said today in New York. It was the first deceleration since June. The gain matched the median estimate of 33 economists surveyed by Bloomberg. Price appreciation is slowing as rising mortgage rates combined with harsh winter weather to cool home purchases over the past few months. Smaller increases mean more homes will remain affordable as the labor market improves, helping maintain the rebound in residential real estate that has boosted growth. Read the court decision
Read the full story...
Reprinted courtesy of Victoria Stilwell, Bloomberg
Ms. Stilwell may be contacted at vstilwell1@bloomberg.net

Collaborating or Competing with Construction Tech Startups

November 15, 2017 — Aarni Heiskanen - AEC Business
I recently interviewed 20 experts and thought leaders about real estate and construction technology and innovation. Many of the interviewees talked about collaboration with startups and how to make the most of it. There’s a growing interest in construction technology. Construction tech firms have garnered $10 billion in investment funding from 2011 through early 2017, according to McKinsey & Company. AngelList, a startup and investor website, currently features over 13,000 companies with “construction” as a keyword. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at info@aepartners.fi

Court’s Ruling on SB800 “Surprising to Some”

October 16, 2013 — CDJ STAFF
Describing it as “surprising to many in the residential home building industry,” Jay Drake of Reuben, Junius & Rose LLP has a piece discussing the recent California Court of Appeals decision that SB800 is not a homeowner’s only remedy for construction defects. The court found, according to Mr. Drake that “the primary purpose of the Act was to provide a property owner with remedies for repair of construction defects before the defects caused actual damages.” In the case before the court, the construction defects had already lead to further damages. Mr. Drake notes that the legislative history of SB800 puts the bill in response to an earlier California court case in which the courts determined that without actual damage to property, a homeowner could not file a construction defect lawsuit. The court concluded that SB800 was not intended to limit the homeowner’s rights after a construction defect situation has lead to damage. Read the court decision
Read the full story...
Reprinted courtesy of

Consequential Damages Flowing from Construction Defect Not Covered Under Florida Law

November 17, 2016 — Tred R. Eyerly -Insurance Law Hawaii
Interpreting Florida law, the United States District Court found there was no duty to defend a contractor against construction defect claims. Evanston Ins. Co. v. Dimmucci Dev. Corp. of Ponce Inlet, Inc., 2016 U.S. Dist. LEXIS 123678 (M.D. Fla. Sept 13, 2016). The insured built condominiums and townhomes. It held three successive CGL policies issued by Evanston. The "your work" exclusion in the policies barred coverage as follows:

"Property Damage" to "your work" arising out of it or any part of it and included in the "products-completed operations hazard." This exclusion does not apply if the damaged work or the work out of which the damage arises was performed on your behalf by a subcontractor.

The insured constructed the Towers Grande Condominium. In 2012 the Towers Grande Condominium Association, Inc. initiated the underlying action alleging that the insured's failure to construct the Towers Grande properly resulted in building defects and deficiencies. Damage to the roof, generator exhaust pipe, and HVAC system was alleged. Further, water intrusion and decking/structural issues were claimed. In addition to the construction defects, the Association also alleged that the insured's faulty work led to additional damages. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES