CAPSA Changes Now in Effect
November 14, 2018 —
Wally Zimolong - Supplemental ConditionsBack in June, I posted about changes coming to the Pennsylvania Contractor and Subcontractor Payment Act (CAPSA), 73 P.S. Section 501, et. seq. The Act applies to virtually all private construction projects in Pennsylvania. As of last week (Oct. 10), those changes are effective. While there is some argument to the contrary, these changes are NOT retroactive and apply to all projects going forward from that date. To recap, here are some of the important changes you need to be aware of:
- Contractual waivers. Parties cannot waive the applicability of the act through contract. Therefore, any clause in a contract purporting to waive the Payment Act’s applicability is void.
- Suspension of work. Unpaid contractors and subcontractors have always enjoyed a common law right to suspend performance until payment was made. Now, they also have a statutory right to do so. Section 5 of the Payment Act ads a subpart (e) which states that an unpaid contractor or subcontractor can suspend performance without penalty if it is not paid.
Read the court decisionRead the full story...Reprinted courtesy of
Wally Zimolong, Zimolong LLCMr. Zimolong may be contacted at
wally@zimolonglaw.com
Builders Beware: Smart Homes Under Attack by “Hide ‘N Seek” Botnet
October 30, 2018 —
Scott L. Satkin & Amtoj S. Randhawa - Newmeyer & Dillion LLPGerman manufacturer eQ-3 has found itself under siege by a botnet known as "Hide 'N Seek." This pernicious malware has infected tens of thousands of eQ-3's smart home devices by compromising the device's central control unit. Once a device has been infected, the malware spreads to other Internet of Things ("IoT") devices connected to the same wireless network. IoT devices have become the prime target for botnet attacks. As opposed to computers, laptops, or other larger computing devices, the smaller storage capacity and lower processing power of IoT devices limit the amount and complexity of the security measures that can be installed—making them an easier target for botnets.
What is a Botnet?
For those unfamiliar with the term, a botnet is a network of devices infected with a malware program allowing the infector to control and/or exploit the devices. Once a suitable number of devices are infected, the person or group controlling the botnet can harness the computing power of each infected device to perform activities which were previously constrained by a single device's capabilities (i.e. DDoS attacks, spamming, cryptocurrency mining, etc.).
Hide 'N Seek – History and Capabilities
The Hide 'N Seek botnet first appeared in January 2018 and has since spread rapidly. Its sophisticated design and capabilities have captivated the attention of many security watchdogs and researchers. While many botnets are designed to be "quick and dirty" (i.e. infect a few devices, eke out a little profit, and inevitably be cleared out or rendered ineffective by security updates and fixes), Hide 'N Seek was designed to maintain itself in the host's system indefinitely. When it was first released, Hide 'N Seek primarily targeted certain routers and internet-enabled security cameras; however, it has now began targeting digital video recorders, database servers, and most recently, smart home hubs.
Hide 'N Seek's communication capabilities are also more advanced than previous botnets. Previous botnets relied on existing communications protocols to communicate with other another, but Hide 'N Seek uses a custom-built peer-to-peer system to communicate. This advancement allows Hide 'N Seek to spread more rapidly than previous botnets.
Hide 'N Seek is also capable of extracting a device owner's personal information (i.e. name, address, e-mail, telephone numbers, etc.) whereas previous botnets were not. Most importantly, Hide 'N Seek is consistently updated to increase its infection rate, decrease its detection probability, and bypass any security measures designed to detect and remove it from the system. This modularity has proved to be Hide 'N Seek's greatest strength.
Protecting Against Hide 'N Seek and Other Botnets
While many of the precautions will undoubtedly come from the device manufactures vis-à-vis software programming and updates, homebuilders can still take some precautions to protect their customers.
- When selecting a smart home system to incorporate into a home's construction, be sure to evaluate its security features including, but not limited to its: wireless connectivity, password/passphrase requirements, interconnectedness with other IoT devices, etc. Third-party reviews from tech-oriented outlets will likely have useful information on a device's security measures, vulnerabilities, and any recent security compromises.
- Be vigilant in installing any eQ-3 smart home systems. The extent of the damage caused by Hide 'N Seek botnet remains unknown, as does damage from other potentially-infected technology. Thus, it may be prudent to avoid installing any eQ-3 device until it becomes evident that the threat has been neutralized and all security vulnerabilities have been remedied.
- If a builder uses technology other than eQ-3, precautions must be taken. Ensure that technology providers are thoroughly researched. It is also recommended to include strong contractual indemnity provisions, and require vendors to carry cyber-specific insurance policies.
- Homebuilders should consider purchasing their own stand alone cyber liability policies as a safety net, should potential exposure arise.
Scott Satkin and Amtoj Randhawa are associates in the Cybersecurity group of Newmeyer & Dillion. Focused on helping clients navigate the legal dispute implications of cybersecurity, they advise businesses on implementing and adopting proactive measures to prevent and neutralize cybersecurity threats. For questions on how they can help, contact Scott at scott.satkin@ndlf.com and Amtoj at amtoj.randhawa@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
Navigating Construction Contracts in the Energy Sector – Insights from Sheppard Mullin’s Webinar Series
October 01, 2024 —
Cesar Pereira - Sheppard MullinConstruction contracts in the energy sector involve unique challenges and risks, particularly with respect to bonds and mechanic’s liens.
Understanding how to navigate these challenges is key to protecting your projects from disputes with general contractors, subcontractors and suppliers.
In our recent webinar, “
Construction Contracts: Bond and Mechanic’s Lien Primer for Energy Projects,” I was joined by my Sheppard Mullin colleagues Chris Kolosov and Emily Anderson to discuss navigating common contract pitfalls and negotiation strategies to protect your interests.
Here are our key takeaways.
- Know Local Mechanic’s Lien Laws: Mechanic’s liens are statutory and vary significantly from state to state. It is critical to understand the local laws and regulations at play in your project’s jurisdiction.
Read the court decisionRead the full story...Reprinted courtesy of
Cesar Pereira, Sheppard MullinMr. Pereira may be contacted at
cpereira@sheppardmullin.com
Surety Bond Now a Valid Performance Guarantee for NC Developers (guest post)
June 09, 2016 —
Melissa Dewey Brumback – Construction Law in North CarolinaWelcome summer days! Today we have a guest post by Todd Bryant, president and founder of
Bryant Surety Bonds. He is a surety bonds expert with years of experience in helping contractors get bonded and start their business. While design professionals generally don’t have to deal with performance bonds directly, they are often at the front lines of advising owners as to various Requests for Proposals submitted by hopeful contractors. In that spirit, be sure to read how the new law changes security requirements. Take it away, Todd!
Last year wrapped up with some good news for North Carolina subdivision developers:
House Bill 721 confirmed that construction bonds are, in fact, a viable form of performance guarantee. Previous legislation was ambiguous on this point, but the new bill– which took effect last October– sought to clear up the confusion. Although the new rules have been in effect for eight months, there’s been scant coverage of the changes, and what they mean for developers.
Read the court decisionRead the full story...Reprinted courtesy of
Melissa Dewey Brumback, Ragsdale Liggett PLLCMs. Brumback may be contacted at
mbrumback@rl-law.com
How the New Dropped Object Standard Is Changing Jobsite Safety
January 02, 2019 —
Derek Rose - Construction ExecutiveIn the United States, a dropped object injures a worker every 11 minutes—equating to nearly 50,000 cases every year. For those who seek medical treatment for these types of injuries, it can cost an average of $42,000. In fact, 5 percent of all fatalities on jobsites are due to falling objects, according to the Bureau of Labor Statistics.
These statistics highlight the overwhelming importance of dropped object prevention. OSHA already identifies dropped object incidents under the category of “Struck by Object” in its widely recognized “Fatal Four” list of the four leading causes of fatalities in the construction industry.
Reprinted courtesy of
Derek Rose, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
The End of Eroding Limits Policies in Nevada is Just the Beginning
August 28, 2023 —
Payne & Fears LLPOn June 3, 2023, Nevada Gov. Joe Lombardo signed into law
AB 398 (the Act) which modifies the Nevada insurance code by restricting the types of liability policies that can be offered in the state.
The End of Eroding Limits Policies in Nevada
First, the Act prohibits liability insurers from issuing “eroding limits” or “burning limits” policies. These are insurance policies under which defense costs decrease policy limits. Most professional liability policies are eroding limits policies. As of Oct. 1, 2023, insurers in Nevada may no longer issue or renew any policy where policy limits are eroded by defense costs.
This change may result in higher premiums on these types of policies to compensate for the higher payouts they will now have to provide in Nevada.
Read the court decisionRead the full story...Reprinted courtesy of
Payne & Fears LLP
The EPA and the Corps of Engineers Propose Another Revised Definition of “Waters of the United States”
February 14, 2022 —
Anthony B. Cavender - Gravel2GavelOn December 7, 2021, the most recent proposed revision to the Clean Water Act’s term, “Waters of the United States” was published in the Federal Register. (See 86 FR 69372.) Comments on this proposal must be submitted by February 7, 2022. This term controls the scope of federal regulatory powers in such programs as the development of water quality standards, impaired waters, total maximum daily loads, oil spill prevention, preparedness and response plans, state and tribal water quality certification programs, the National Pollutant Discharge Elimination System (NPDES) permit program, and the Corps of Engineers’ dredge and fill program. The Environmental Protection Agency (EPA) and the Corps of Engineers have jointly drafted this comprehensive proposed rule, which also responds to President Biden’s Executive Order 13990, issued in January 2021.
Background
The agencies noted that they have repeatedly defined and re-defined “Waters of the United States” since the Clean Water Act was enacted in 1972. This level of sustained commitment is unique to this program, perhaps reflecting the importance of the programs that are implemented through the Clean Water Act. The most recent rulemaking efforts took place in 2015, 2017, 2020 and now 2022, and the Supreme Court has issued several landmark rulings in response to these efforts. See City of Milwaukee v. Illinois, 451 US 304 (1981), United States v. Riverside Bayview, 474 US 121 (1985), SWANCC v. United States, 531 US 159 (2001), Rapanos v. United States, 547 US 715 (2006), National Association of Manufacturers v. Department of Defense, 138 S Ct 617 (2018), and County of Maui, Hawaii v. Hawaii Wildlife Fund, 140 S, Ct 1462 (2020). The rules promulgated in 2015 and entitled, “Clean Water Act: Definition of Waters of the United States” expanded the scope of federal regulatory jurisdiction, but the 2020 rule, entitled the “Navigable Waters Protection Rule,” contracted that scope. Now, the agencies have proposed the “Revised Definition of ‘Waters of the United States,’” which will rescind the 2020 rule and inevitably restore something of the scope of the 2015 rule by returning to the familiar “1986 rules” that were issued by the Corps of Engineers in 1986 and EPA in 1988, as modified by the recent Supreme Court decisions mentioned above. Both the 2015 and 2020 rules were mired in litigation and the Corps and EPA view the resort to the 1986 rules as a fresh start for the Clean Water Act. In short, the topsy-turvy history of regulation under the Clean Water Act continues.
Read the court decisionRead the full story...Reprinted courtesy of
Anthony B. Cavender, PillsburyMr. Cavender may be contacted at
anthony.cavender@pillsburylaw.com
Canada to Ban Foreigners From Buying Homes as Prices Soar
April 25, 2022 —
Brian Platt & Ari Altstedter - BloombergCanada will ban most foreigners from buying homes for two years and provide billions of dollars to spur construction activity in an attempt to cool off a surging real-estate market.
The measures will be contained in Finance Minister Chrystia Freeland’s budget on Thursday, according to a person familiar with the matter, asking not to be named because the matter is private.
The move signals that Prime Minister Justin Trudeau is becoming more assertive about taming one of the developed world’s most expensive housing markets -- and that the government is growing more concerned about the political backlash to inflation and the rising cost of housing.
Reprinted courtesy of
Brian Platt, Bloomberg and
Ari Altstedter, Bloomberg Read the court decisionRead the full story...Reprinted courtesy of
