Seattle Washington Building Expert Directory

Big Bertha Lawsuits—Hitachi Zosen Weighs In

January 31, 2018 — John P. Ahlers – Ahlers Cressman & Sleight PLLC
In a recent article published by Seattle Business Magazine, the Japanese manufacturer of the much-maligned tunnel machine (nicknamed “Bertha”) provided its version of events and its position to the public. The interview took place after executives from Hitachi Zosen were not invited to the ceremony celebrating Bertha’s breakthrough at the end of its two-mile journey underground Seattle. Ultimately, apparently, Seattle Tunnel Partners (“STP”), the general contractor for the project, and Washington State Department of Transportation (“WSDOT”) agreed that Hitachi Zosen executives could attend the event, but they were not allowed to stand with other dignitaries on a specially-built viewing platform. The $3.2 billion Alaska Way Viaduct replacement project is embroiled in a number of legal controversies. Now that the tunnel is finished, Hitachi Zosen has finally decided to tell its side of the story. Hitachi’s problems started on December 5, 2013, three days after the tunnel-boring machine (“TBM”) hit a 120-foot long, eight-inch diameter steel well casing (the project DRB has determined that the pipe was a differing site condition), the TBM overheated and ground to a halt. The project was shut down almost two years while the TBM was being repaired. According to Hitachi Zosen, it always worked hard to get the job done. “We wanted to finish the tunnel and make Seattle happy with the results,” said Hidetoshi Hirata, the general manager for Hitachi Zosen. Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers Cressman & Sleight PLLC
Mr. Ahlers may be contacted at john.ahlers@acslawyers.com

Loan Snarl Punishes Spain Builder Backed by Soros, Gates

July 30, 2014 — Katie Linsell, Manuel Baigorri and Ruth David – Bloomberg
Pressure is mounting on Esther Koplowitz to refinance personal loans before a deadline tomorrow and allow a Spanish builder that counts Bill Gates and George Soros among investors to resolve its own debt tangle. Koplowitz is renegotiating about 1 billion euros ($1.8 billion) of debt tied to her controlling stake in Fomento de Construcciones & Contratas SA, according to two people familiar with the matter, who asked not to be identified because it’s private. Her determination to retain control means that she is unlikely to approve any plan by FCC to raise equity until she refinances her own debt, the people said. Ms. Linsell may be contacted at klinsell@bloomberg.net; Mr. Baigorri may be contacted at mbaigorri@bloomberg.net; Ms. David may be contacted at rdavid9@bloomberg.net Read the court decision
Read the full story...
Reprinted courtesy of Katie Linsell, Manuel Baigorri and Ruth David, Bloomberg

Turning Back the Clock: DOL Proposes Previous Davis-Bacon Prevailing Wage Definition

April 19, 2022 — David Chidlaw & Carina Novell - Sheppard Mullin Construction & Infrastructure Law Blog
On March 11, 2022, the Department of Labor (“DOL”) proposed reverting the definition of “prevailing wage” under the Davis-Bacon Act to a definition used over 40 years ago. According to the DOL, the proposal is meant to modernize the law and “reflect better the needs of workers in the construction industry and planned federal construction investments.”[1] Brief History Lesson The Davis-Bacon Act was enacted in 1931 and requires the payment of locally prevailing wages and fringe benefits on federal construction contracts. The law applies to workers on contracts in excess of $2,000 entered into by federal agencies and the District of Columbia for the construction, alteration, or repair of public buildings or public works.[2] From the 1930s to the early 1980s, the DOL used the following three-step process to define prevailing wage:

Any wage rate paid to a majority of workers.
If there was no wage rate paid to a majority of workers, then the wage rate paid to the greatest number of workers, provided it was paid to at least 30 percent of workers (i.e., the “30 percent rule”).
If the 30 percent rule was not met, the weighted average rate.

Reprinted courtesy of David Chidlaw, Sheppard Mullin and Carina Novell, Sheppard Mullin Mr. Chidlaw may be contacted at dchidlaw@sheppardmullin.com Ms. Novell may be contacted at cnovell@sheppardmullin.com Read the court decision
Read the full story...
Reprinted courtesy of

Understanding the Miller Act

February 26, 2015 — Beverley BevenFlorez-CDJ STAFF
John P. Ahlers of Ahlers & Cressman PLLC, explained who is covered by the Miller Act in regards to Federal public works projects on the firm’s blog. Ahlers stated that “[t]he Miller Act requires that all general contractors post payment bonds on contracts in excess of $25,000.00.” In his blog post, Ahlers goes over coverage and the distinction between subcontractor and supplier. Ahlers commented, “While, at first glance, it may seem fairly simple to sort out who is and who is not covered by the Miller Act payment bond, the analysis can at times be factually and legally complex. This is an area that, if faced, the contractor should seek legal advice of an experienced construction lawyer before jumping to conclusions.” Read the court decision
Read the full story...
Reprinted courtesy of

Competition to Design Washington D.C.’s 11th Street Bridge Park

May 07, 2014 — Beverley BevenFlorez-CDJ STAFF
According to Architect Magazine, eighty landscape architecture and architecture firms (forty teams) submitted proposals to design the $25-million Washington D.C. 11th Street Bridge Park project. A jury has shortlisted six design teams: “Wallace Roberts & Todd (WRT)/Next Architects, Piet Oudolf with Glenn LaRue Smith/PUSH Studio/WXY Architecture + Urban Design, OLIN/OMA, Workshop: Ken Smith Landscape/Davis Brody Bond, Stoss Landscape Urbanism/Höweler + Yoon Architecture, and Balmori Associates/Cooper, Robertson & Partners.” The “nonprofit Building Bridges Across the River at THEARC (Town Hall Education Arts Recreation Campus) and the District's Office of Planning” launched the competition in March of this year. Architect Magazine stated that “the goal of” the project is to unify “what some call a ‘long-divided city,’ by connecting Capitol Hill and Anacostia, the neighborhoods on either side of the river.” Read the court decision
Read the full story...
Reprinted courtesy of

Washington State May Allow Common Negligence Claims against Construction Professionals

November 20, 2013 — CDJ STAFF
Lane Powell, a law firm with offices in Washington, Oregon, Alaska, and London has issued a construction law update on a recent decision of the Washington Supreme Court. The case involved a development firm that sued its engineering firm. The developer had gained preliminary approval to develop two short plats, and after the approvals expired, sought the assistance of the engineering firm in regaining approval. Eventually, the developer lost the plats to foreclosure and sued the engineering firm. The Washington Supreme Court rejected most of the developer’s claims in the case, but sent the negligence claims back to the trial court. The Lane Powell construction law update notes that “the record didn’t adequately establish the scope of the professional obligations incorporated into the contract, the court refused to determine if any of the engineer’s duties to the plaintiffs arose independently of the contract.” Read the court decision
Read the full story...
Reprinted courtesy of

Florida’s Construction Defect Statute of Repose

August 24, 2017 — David Suggs – Bert L. Howe & Associates, Inc.
Butler Weihmuller of Katz Craig LLP discussed Florida’s 10-year statute of repose law: “Under § 95.11(3)(c), the action must commence within 10 years after the date of actual possession by the owner, the date of the issuance of a certificate of occupancy, the date of abandonment of construction if not completed, or the date of completion or termination of the contract between the professional engineer, registered architect, or licensed contractor and his or her employer, whichever date is latest.” However, Weihmuller explains that parties may disagree on the specific date For instance, in Busch v. Lennar Homes, LLC, Florida’s 5th DCA recently “reversed a trial court’s dismissal of a homeowner’s construction defect claim that was filed just beyond 10 years after the closing date on the property.” The previous decision had been based on the notion that the contract had been completed upon the date of closing. The 5th DCA declared that “a contract is not completed until both sides of a contract have been performed” and “pointed to the ‘inspection and punch-list clause’ of the contract.” The clause indicated that “[a]ny remaining items that Seller has agreed to correct will be corrected by Seller at Seller’s sole cost and expense prior to closing or at Seller’s option within a reasonable time after closing.” Since not all punch-list items had been completed prior to closing, the 5th DCA held that the contract had not been completed at closing, and therefore the statute of repose did not begin until the punch-items had been accomplished. Read the court decision
Read the full story...
Reprinted courtesy of

Seven Proactive Steps to Avoid Construction Delay Disputes

September 29, 2021 — Michael Pink - Construction Executive
Delays, cost overruns and disputes have long been part of the commercial construction industry, making the work of reactive forensic analysis by consultants and attorneys a necessary component. Yet many internal practices and issues within construction companies strongly correlate with projects that result in legal disputes and financial losses. There are seven proactive steps that can help companies minimize losses and claims. Prepare a Cost- and Resource-Loaded Critical Path Method Schedule This is the first step any contractor can take to establish and document a manpower plan, a timeline and an intended flow for its work. Doing so is beneficial for two reasons: it will become the basis for measuring impacts and variances to both cost and schedule in a delay, dispute or claim setting; and it will serve as a great project management resource or tool. Without thinking through manpower, durations and workflow in great detail at the beginning of the project, contractors put themselves at risk of becoming delayed and blowing the budget. Reprinted courtesy of Michael Pink, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES