Standard of Care
December 16, 2019 —
Jay Gregory - Gordon & Rees Construction Law BlogOne of the key concepts at the heart of Board complaints and civil claims against a design professional is whether or not that design professional complied with the applicable standard of care. In order to prevail on such a claim, the claimant must establish (typically with the aid of expert testimony) that the design professional deviated from the standard of care. On the other side of the coin, to defend a design professional against a professional malpractice claim, defense counsel attempts to establish that – contrary to the claimant’s allegations – the design professional, in fact, complied with the standard of care. Obviously, it becomes very important in such a claim situation to determine what the standard of care is that applies to the conduct of the defendant design professional. Often, this is easier said than done. There is no dictionary definition or handy guidebook that identifies the precise standard of care that applies in any given situation. The “standard of care” is a concept and, as such, is flexible and open to interpretation. Traditionally, the standard of care is expressed as being that level of service or competence generally employed by average or prudent practitioners under the same or similar circumstances at the same time and in the same locale. In other words, to meet the standard of care a design professional must generally follow the pack; he or she need not be perfect, exemplary, outstanding, or even superior – it is sufficient merely for the designer to do that which a reasonably prudent practitioner would do under similar circumstances. The negative or reverse definition also applies, to meet the standard of care, a practitioner must refrain from doing what a reasonably prudent practitioner would have refrained from doing.
Although we have this ready definition of the standard of care, in any given dispute it is practically inevitable that the parties will have markedly different opinions as to: (1) what the standard of care required of the designer; and (2) whether the defendant design professional complied with that requirement. The claimant bringing a claim against a design professional typically will be able to find an expert reasonably qualified (at least on paper) who will offer an opinion that the defendant failed to comply with the standard of care. It is just as likely that the counsel for the defendant design professional will be able to find his or her own expert who will counter the opinion of the claimant’s expert and maintain that the defendant design professional, in fact, complied with the standard of care. What’s a jury to think?
The concept of standard of care is intertwined with the legal concept of negligence. In the vast majority of law suits against design professionals, a claimant (known as the plaintiff) will assert a claim for negligence against the design professional now known as the defendant.1 As every first year law student learns while studying the field of “Torts,” negligence has four subparts. In order for a defendant to be found negligent, the claimant must establish four elements: (1) duty; (2) breach; (3) causation; and (4) damages. In other words, to establish a claim against a defendant design professional, a plaintiff must demonstrate that the defendant owed the plaintiff a duty of care but breached that duty and, as a result, caused the plaintiff to suffer damages.
Read the court decisionRead the full story...Reprinted courtesy of
Jay Gregory, Gordon & Rees Scully MansukhaniMr. Gregory may be contacted at
jgregory@grsm.com
Colorado Senate Bill 15-177: This Year’s Attempt at Reasonable Construction Defect Reform
February 18, 2015 —
Zach McLeroy – Colorado Construction LitigationOn February 10, 2015, Senators Scheffer and Ulibarri introduced Senate Bill 15-177, which is sponsored in the House by Representatives DelGrosso and Singer. SB 15-177 amends the prerequisites, found in the Colorado Common Interest Ownership Act (“CCIOA”), for an association to file a construction defect action. The bill has been assigned to the Senate Committee on Business, Labor, and Technology but not yet scheduled for hearing.
The major points of the bill include: 1) enforcement of a mediation or arbitration provision contained in the original governing documents of a common interest community, even if subsequently amended or removed; 2) the addition of a requirement that mediation take place before a construction defect action can be filed; 3) heightened requirements that an association board provide advanced notice to all unit owners, together with a disclosure of projected costs, duration, and financial impact of the construction defect claim; 4) the addition of a requirement that the board obtain the written consent of a majority of the owners of units, and; 5) a requirement that prior to the purchase and sale of a property in a common interest community, the purchaser receive notice that binding arbitration may be required for certain disputes.
Read the court decisionRead the full story...Reprinted courtesy of
Zach McLeroy, Higgins, Hopkins, McLain & Roswell, LLCMr. McLeroy may be contacted at
mcleroy@hhmrlaw.com
Mexico’s Construction Industry Posts First Expansion Since 2012
August 13, 2014 —
Brendan Case – BloombergMexico’s construction industry expanded in June for the first time in 19 months, adding to signs that the economy is rebounding after missing analyst estimates in seven of the last eight quarters.
Construction increased 2.2 percent from the year earlier, helping industrial production to expand 2 percent, according to data released today by the national statistics agency. The median estimate of 19 economists surveyed by Bloomberg was for industrial output to rise 2.1 percent.
“Industrial activity continued strengthening in June, very much in line with what the market expected,” Mario Correa, the chief Mexico economist at Bank of Nova Scotia, said in a note to clients today. “The construction industry finally showed a positive growth rate.”
Read the court decisionRead the full story...Reprinted courtesy of
Brendan Case, BloombergMr. Case may be contacted at
bcase4@bloomberg.net
Tennessee Looks to Define Improvements to Real Property
January 27, 2020 —
Lian Skaf - The Subrogation StrategistFor subrogation practitioners dealing with an installation-based statute of repose, knowing what is an improvement to real property is the first battle in what can, but does not have to be, a long fight. Like many other states, Tennessee’s statute of repose bars claims based on improvements to real property. Tennessee’s statute of repose runs four years after substantial completion of the improvement. See Tennessee Code Ann. § 28-3-202. In the case of Maddox v. Olshan Found. Repair & Waterproofing Co. of Nashville, L.P., E A, 2019 Tenn.App. LEXIS 464, 2019 WL 4464816, the Court of Appeals of Tennessee examined whether or not the work done by the defendant, Olshan Foundation Repair & Waterproofing Co. of Nashville, L.P., E.A. (Olshan) — which addressed bowing walls, cracks in the foundation and walls and water intrusion — qualified as improvements to real property for the purposes of the statute of repose. The court held that the work by Olshan essentially amounted to repairs, and did not qualify as improvements to real property.
In Maddox, the plaintiff, Rachel Maddox (Maddox), noticed cracking in her home in 2005 and hired Olshan to assess the issue and conduct necessary repairs. Olshan made several recommendations and the parties agreed on Olshan’s proposal for the price of $27,000. From their initial work in 2005 until late 2011, Olshan visited the property several times to address ongoing structural issues with the home. Eventually, eight months after Olshan told Maddox they could not fix the house and failed to return her phone calls, Maddox filed suit, alleging fraud against the company.
After a three-day bench trial, the trial court found in favor of the plaintiff for $187,000, plus $15,0000 in punitive damages. Among other holdings, the court rejected Olshan’s statute of repose defense. Olshan appealed, raising the statute of repose issue again.
Read the court decisionRead the full story...Reprinted courtesy of
Lian Skaf, White and Williams LLPMr. Skaf may be contacted at
skafl@whiteandwilliams.com
Brown Orders Mandatory Water Curbs for California Drought
April 01, 2015 —
Michael B. Marois – BloombergGovernor Jerry Brown ordered California’s first mandatory water restrictions as the drought gripping the state enters a fourth year.
Brown issued an executive order seeking a mandatory 25 percent reduction in use and a requirement that new homes feature water-efficient irrigation if the builder plans to use potable water for landscaping. He also called for 50 million square feet of lawns to be replaced with drought-tolerant landscaping and required campuses, golf courses and cemeteries to cut back on water.
Read the court decisionRead the full story...Reprinted courtesy of
Michael B. Marois, BloombergMr. Marois may be contacted at
mmarois@bloomberg.net
Re-Thinking the One-Sided Contract: Considerations for a More Balanced Approach to Contracting
November 21, 2022 —
William Underwood - ConsensusDocsConstruction projects can be inherently risky – often there are multiple parties (owners, architects, engineers, contractors, subcontractors, consultants, vendors, government officials, sureties, insurers, and many others), unforeseen site conditions, tangled supply chains, acts of God, inadequate funding, site safety matters, and a whole host of other issues that can make even a relatively straight-forward job complex. Parties necessarily want to minimize their individual risk to the greatest extent possible on construction projects. And to do so, they may seek to push as much risk as possible onto the other side through one-sided terms in their construction contract.
But is an entirely one-sided contract the best way to mitigate risk? In many instances, the answer is no. Every contract is different – and many considerations should be taken into account when drafting and negotiating contracts – but entirely one-sided can often have unintended consequences and create risks that otherwise might not exist in a contract that allocates and balances risk more equally across the parties.
This article reviews several considerations (although it is not an exhaustive list) for avoiding one-sided contracts, including some of the benefits created through the use of equitable contract clauses. And for context, some examples of one-sided contract clauses include no relief for other contractor/owner-caused delays; no relief for force majeure events; no relief for unforeseen site conditions; and broad form indemnification clauses (i.e. one party assumes the obligation to pay for another party’s liability even if the other party is solely at fault). Again, this is a non-exhaustive list, and many other standard contract provisions can be altered to become one-sided. But the general premise of a “one-sided contract clause” is that it shifts all risk, obligation, and liability to one party. And this article examines why that might not be the best idea.
Read the court decisionRead the full story...Reprinted courtesy of
William Underwood, Jones Walker LLPMr. Underwood may be contacted at
wunderwood@joneswalker.com
Dozens Missing in LA as High Winds Threaten to Spark More Fires
January 14, 2025 —
Laura Curtis & Brian K Sullivan - BloombergHot, dry winds are pummeling Los Angeles and surrounding areas of Southern California, raising wildfire risks through at least Wednesday as the region reels from blazes that have killed at least 24 people and burned neighborhoods to the ground.
Tropical-storm-strength winds were raking the mountains around LA on Tuesday, with gusts reaching 60 miles (97 kilometers) per hour. About 2 million people face extreme fire conditions across a swath of land that includes Oxnard, Thousand Oaks and Simi Valley, according to the US Storm Prediction Center. Red-flag fire warnings extend south to San Diego.
Reprinted courtesy of
Laura Curtis, Bloomberg and
Brian K Sullivan, Bloomberg Read the court decisionRead the full story...Reprinted courtesy of
Traub Lieberman Partner Eric D. Suben Obtains Federal Second Circuit Affirmance of Summary Judgment in Insurer’s Favor
April 10, 2023 —
Eric D. Suben - Traub LiebermanIn the underlying action, a property owner hosting a motorcycle rally was sued after a motorcycle collided with an auto near the entrance to the premises, injuring the cyclists. The cyclists sued the property owner, among others, alleging failure to supervising traffic on the adjoining roadway. The property owner tendered the claim under its CGL policy, which was endorsed with an “absolute auto exclusion,” precluding coverage for claims “arising out of or resulting from the ownership, maintenance, use or entrustment to others of any…auto.” The CGL insurer disclaimed coverage based on the endorsement.
In the ensuing coverage litigation, Traub Lieberman represented the insurer, and moved for summary judgment arguing that the “absolute auto exclusion” was dispositive of coverage on the facts alleged, citing case law from New York state courts enforcing similar exclusions to preclude coverage for multi-vehicle accidents. The insured argued in opposition that the outcome should be controlled by Essex Insurance Company v. Grande Stone Quarry, LLC, 82 A.D.3d 1326, 918 N.Y.S.2d 238 (3rd Dep’t 2011), in which the court declined to apply such exclusion in the case of a single-vehicle accident caused by a dangerous condition of the insured’s premises. The federal district judge disagreed with the insured’s argument in this regard, granting Traub Lieberman’s motion for summary judgment in favor of the insurer.
Read the court decisionRead the full story...Reprinted courtesy of
Eric D. Suben, Traub LiebermanMr. Suben may be contacted at
esuben@tlsslaw.com
