Seattle Washington Building Expert Directory

Last, but NOT Least: Why You Should Take a Closer Look at Your Next Indemnification Clause

March 09, 2020 — Aimee Cook Oleson - Construction & Infrastructure Law Blog
Indemnification clauses appear in nearly every agreement, but they are often overlooked as mere boilerplate provisions after the parties have painstakingly negotiated all of the other terms. It is not uncommon for parties to simply re-use the indemnity language from a prior agreement without considering whether it is a good fit for their current project. This can be a big mistake that may lead to ambiguities and uncertainties if a dispute arises down the road. A standard or canned indemnification clause might work to undo all of the effort that has gone into properly allocating risk. These clauses often contain language such as “notwithstanding anything to the contrary herein,” or the like, which can alter and override other provisions in the agreement. Indemnification clauses are arguably the most important part of an agreement when an accident or dispute arises on a project. Therefore, they deserve an extra look before finalizing an agreement. Here are a few issues to keep in mind when reviewing your next indemnification clause:

Have you included all necessary parties?

Any party who could face potential liability should be included as an indemnified party. This often includes entities and persons related to the contracting parties, not just the parties themselves.
A well drafted indemnity clause will ensure that all parties are liable for the result of their own work and negligence and that of any party that they have hired to work on a project. This includes employees, agents, subcontractors, or any other similar party.

Read the court decision
Read the full story...
Reprinted courtesy of Aimee Cook Oleson, Sheppard Mullin
Ms. Oleson may be contacted at AOleson@sheppardmullin.com

Withholding Payment or Having Your Payment Withheld Due to Disputes on Other Projects: Know Your Rights to Offset

January 04, 2021 — Christopher C. Broughton, Jones Walker LLP - ConsensusDocs
Introduction The right to offset refers to the common sense ability to reduce or eliminate your payment obligations to a party who owes you money on another contract. With offsets, common law largely tracks common sense. The right of offset is recognized by statute and court decisions in many states as well as under federal law and the U.S. Bankruptcy Code. The right to offset can also be established in the contract or subcontract. But like many things that may seem simple, the right to offset can easily become complex. This article provides an overview of the extent and limits of the right to offset varies from state to state and with federal government contracts about the extent and limits of the right of offset. Construction trust fund statutes add another layer of complications. These variations may not be obvious or intuitive, but they have a tremendous impact on your right to get paid or your right to withhold payment. Because of the variations, you must always confirm the law applicable to your contract or subcontract, which may not be where the project or you are located. Read the court decision
Read the full story...
Reprinted courtesy of Christopher C. Broughton, Jones Walker LLP
Mr. Broughton may be contacted at cbroughton@joneswalker.com

How Construction Contracts are Made. Hint: It’s a Bit Like Making Sausage

October 07, 2016 — Garret Murai – California Construction Law Blog
Construction can be a messy affair. In a sense, that’s to be expected when you’re building a complex structure, involving the coordination of several parties and numerous persons, in the natural environment and in the elements, subject to an increasing array of laws, regulations, ordinances and codes, and often at the cost of hundreds if not billions of dollars. So too can construction contracts. There’s the plans, the specifications, the general conditions, the special conditions, the addenda, the prime contract, the subcontracts, the purchase orders, and the change orders, to name just a few of the documents which bind parties, which should ideally be consistent and complimentary with one another, when the reality is that the parties bound to those contracts often have very different interests. Perhaps the analogy goes a little too far afield, but it makes the point, that it can sometimes be a bit like making sausage. The next case, Watson Bowman Acme Corporation v. RGW Construction, Inc., California Court of Appeals for the Fifth District, Case No. F070067 (August 9, 2016), highlights the problems which can arise from the numerous documents which make up the typical construction contract today and the lengths that juries and judges must go to interpret what those agreements mean. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel, Rosen, Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Complying With Data Breach Regulations in the Construction Industry

November 24, 2019 — Ryan Bilbrey - Construction Executive
Recent data breach incidents—like the massive Capital One cyberattack, where a former employee accessed more than 100 million customer accounts and credit card applications—have left many users questioning how safe their information really is in the hands of companies. There is reason to be concerned. More than 4.1 billion records were exposed in nearly 4,000 data breaches reported in the first half of 2019 alone, according to the 2019 MidYear QuickView Data Breach Report. Construction companies are not immune. As the industry becomes more reliant on technology—using augmented reality, Building Information Modeling and drones on construction sites, for example—construction companies are becoming greater targets for hackers looking to gain a financial or strategic advantage. Instead of assuming a company will never experience a breach (or rather, denying that it will ever happen), it’s important to be aware of possible threats and establish data breach response policies to minimize potentially catastrophic fallout. Reprinted courtesy of Ryan Bilbrey, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Bilbrey may be contacted at rbilbrey@biaprotect.com

Amid the Chaos, Trump Signs Executive Order Streamlining Environmental Permitting and Disbands Infrastructure Council

August 24, 2017 — Garret Murai - California Construction Law Blog
We’ve been trying to stay focused here at the California Construction Law Blog. But it’s been hard. This past week, a couple of new developments took place at the federal level on infrastructure, although if you blinked, you may have missed it. Executive Order on Environmental Permitting This past Tuesday, at a press conference quickly overshadowed by the President’s comments about the tragic events that took place in Charlottesville, President Trump announced that he had signed a new executive order aimed at streamlining the environmental permitting process for federally-funded projects. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Surveys: Hundreds of Design Professionals See Big COVID-19 Business Impacts

April 27, 2020 — Bruce Buckley & Debra K. Rubin - Engineering News-Record
As more states, counties and cities call on non-essential businesses to shut down to help ease the effects of the coronavirus pandemic, design professionals already see major workload impacts from the economic slowdown, according to three new association surveys of members and one of CEOs by a financial consulting firm. Reprinted courtesy of Bruce Buckley, Engineering News-Record and Debra K. Rubin, Engineering News-Record Ms. Rubin may be contacted at rubind@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Patti Santelle Honored by Rutgers School of Law with Arthur E. Armitage Sr. Distinguished Alumni Award

March 01, 2021 — Patricia Santelle - White and Williams
White and Williams is proud to announce that Patti Santelle, Chair Emeritus, will be honored by the Rutgers School of Law-Camden Alumni Association with the 2020 Arthur E. Armitage Sr. Distinguished Alumni Award. The Armitage Award was established in 1983 in memory of Armitage, who, with a group of interested citizens, founded both the South Jersey Law School in 1926 and its companion College of South Jersey in 1927. Past recipients include governors, member of Congress, state and federal judges, and industry leaders. Patti, a 1985 graduate, is a Co-Chair of the Executive Committee of the newly established Rutgers Law Alumnae Network and a Past Chancellor and long-time member of the Board of the Rutgers-Camden Law Alumni Association. While in law school, she was President of the Student Bar Association, winner of the Hunter Advanced Moot Court Competition and a member of the National Moot Court Team. In 2010, Patti received the Scarlet Oak Meritorious Service Award from Rutgers University for her contributions as an alumni leader and student mentor at the law school. For the past seven years, she served as the Managing Partner and Chair of the Executive Committee at White and Williams, the first woman in the firm’s history and in the City of Philadelphia to serve in that role in a major law firm. Read the court decision
Read the full story...
Reprinted courtesy of Patricia Santelle, White and Williams
Ms. Santelle may be contacted at santellep@whiteandwilliams.com

Maximizing Contractual Indemnity Rights: Components of an Effective Provision

December 02, 2015 — William Kennedy – White and Williams LLP
Tort law is aimed at providing compensation to the victims of negligence. Tort law encourages plaintiffs to cast a wide net, pursuing claims or suits against not only those whose fault seems manifestly primary, but also against defendants whose causal exposure is minimal, against those whose exposure is purely by operation of law. As discussed in the first installment of this series, "Maximizing Contractual Indemnity: Problems with Common Law," three common law principles – vicarious liability, joint and several liability, and common law indemnity – cause some parties to pay in excess of their actual degree of causal fault. Contractual indemnity can remedy that harsh result. Part Two: Components of an Effective Provision Properly composed, “broad form” contractual indemnity provisions permit an Indemnitee to shift the full range of financial consequences from tort exposure, including civil damages, defense fees, expert fees, and litigation expenses. Such contracts permit indemnity even where the underlying damage was incurred due to a degree of negligence or fault on the part of the Indemnitee. Such contracts can also allow an Indemnitee to shift to the Indemnitor the risk of loss for someone from whom the Indemnitor would otherwise be immune from suit (e.g., the Indemnitor’s employees). A well-written contract can even convert an entity which is an Indemnitor as to one party (e.g., a general contractor which has to indemnify a property owner) into an Indemnitee as to another party (e.g., a subcontractor) for the very same risk. Read the court decision
Read the full story...
Reprinted courtesy of William Kennedy, White and Williams LLP
Mr. Kennedy may be contacted at kennedyw@whiteandwilliams.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES