Fairfield Connecticut Building Expert Directory

Subcontractor's Faulty Workmanship Is Not an "Occurrence"

March 16, 2017 — Tred R. Eyerly – Insurance Law Hawaii
The court found there was no duty to defend the subcontractor for alleged faulty workmanship in installing stone veneer at a condominium construction project. Quality Stone Veneer, Inc. v. Selective Ins.Co. of Am., 2017 U.S. Dist. LEXIS 9393 (E.D. Pa. Jan. 23, 2017). Quality Stone Veneer (QSV) entered a subcontract with Mignatti Construction, the general contractor, for development of a condominium. QSV agreed to provide all the materials and labor related to the installation of stone veneer at the project. After construction began, the Association filed a complaint against Mignatti, claiming deficiencies in the construction of the furnace, ventilation, roofing, alarms, sprinklers, electrical and water systems. Mignatti filed a joinder complaint against QSV for contribution and/or indemnity for breach of warranty and negligence. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Be Wary of Construction Defects when Joining a Community Association

February 07, 2013 — CDJ STAFF
There are some benefits to living in small developments with correspondingly small community association. Marilyn Briscoe told the Chicago Tribune that in her 34-unit town home association, "people kind of look out for each other here." But the article also cautions to not only meet the other owners, but that you should "know the developer" and "be leery if you discover litigation for construction defects." Ryan Shpritz, an association attorney said that "you don't want to start out your new association by spending money on lawyer fees or repairing defects." Whether the development is large or small, "having construction defect litigation going on will have an impact on salability." Read the court decision
Read the full story...
Reprinted courtesy of

New Standard Addresses Wind Turbine Construction Safety Requirements and Identifies Hazards

October 09, 2018 — Christopher Daniels - Construction Executive
American Society of Safety Professionals’ industry consensus standard, ANSI/ASSP A10.21 – 2018 Safety Requirements for Safe Construction and Demolition of Wind Generation/Turbine Facilities, is the first standard to identify and address hazards specific to wind turbine construction. It includes nearly a dozen appendices that provide additional consideration and guidance for hazards that vary between projects, turbines and geographical areas. The new A10.21 standard starts by requiring a site hazard identification prior to construction commencing. It establishes the general contractor as the responsible party for site hazard identification assessment. This is because the general contractor is usually one of the first entities on site able to assess the various challenges/concerns such as: geography, utilities, environmental, etc. This assessment is usually done by driving the project site and identifying GPS coordinates of specific challenges. Reprinted courtesy of Christopher Daniels, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Daniels may be contacted at chris.daniels@mortenson.com

Brief Overview of Rights of Unlicensed Contractors in California

September 10, 2014 — William M. Kaufman – Construction Lawyers Blog
Under California Contractor’s State License Law enumerated in Business and Professions Code Sections 7000 to 7191, a contractor may not “bring or maintain” any action for compensation for performing any act or contract for which a license is required unless the contractor was duly licensed “at all times” during performance. Bus & Prof Code Section 7031(a). What does this mean and who does it include? This is a question that often has to be answered on a case by case basis. Basically, California does not want unlicensed contractors to be able to get paid for work that should be performed by a licensed contractor. The law has set forth some general parameters. General contractors, subcontractors, and master developers must be licensed. However, suppliers, manufacturers, laborers and equipment lessors are exempt and do not need a contractor’s license. Essentially, those parties that merely furnish material or supplies without fabricating them into, or consuming them in the performance of work, do not need to be licensed. Bus & Prof Code Section 7052. There are sever fines and penalties for those who improperly perform construction work without a license. A contract between any contractor and an unlicensed subcontractor is a misdemeanor. Lack of a license bars all actions in law or in equity for collection of compensation for the performance of work requiring a license. There are very few exceptions to this rule. A “savvy” unlicensed contractor cannot simply avoid these requirements by “subbing” out all the work to licensed contractors. Any person who uses the services of an unlicensed contractor may file a court action or cross-complaint to recover all payments made to the unlicensed contractor. In addition, a person who uses the services of an unlicensed contractor is a victim of a crime and eligible for restitution of economic losses regardless of whether that person had knowledge that the contractor was unlicensed. Bus. & Prof Code Sections 7028, 7028.16. It goes without saying that performing work without a license on projects is a bad idea. Reprinted courtesy of William M. Kaufman, Lockhart Park LP Mr. Kaufman may be contacted at wkaufman@lockhartpark.com, and you may visit the firm's website at www.lockhartpark.com Read the court decision
Read the full story...
Reprinted courtesy of

New Iowa Law Revises Construction Defects Statute of Repose

September 07, 2017 — David Suggs – Bert L. Howe & Associates, Inc.
Starting July 1st of this year, Iowa homeowners now have only ten years to file a claim against the builder instead of the fifteen years that was allowed previously, reported WZAD 8 News. Furthermore, commercial property owners will only have eight years to file their suits. Scott Webster, Vice President of the Quad Cities Builders and Re-modelers Association, told WZAD 8 News that insurance companies played a part in the change: “[I]nsurance companies were saying, Iowa is at such a long period of time for any kind of defect, that may be hard to prove whether the builder even did it or the homeowner modified the house.” However, Tom Miller, Iowa Attorney General, disagreed with the change in policy: “We think that it’s unfair to consumers, the defects in buildings and commercial buildings too, can show up very easily between eight and fifteen years out.” Read the court decision
Read the full story...
Reprinted courtesy of

Supreme Court Overrules Longstanding Decision Supporting Collection of Union Agency Fees

July 02, 2018 — Amy R. Patton, Blake A. Dillion, & Eric C. Sohlgren - Payne & Fears
In a 5 to 4 opinion, the United States Supreme Court overruled a longstanding decision which required government employees who are represented by but do not belong to a union, to pay a fair share or agency fee to cover the union's costs for collective bargaining activities. In Janus v. American Federation of State, County, and Municipal Employees, Council 31, 585 U.S. ___ (2018), the Supreme Court found that requiring such fees from nonconsenting public sector employees violates the First Amendment: "[n]either an agency fee nor any other form of payment to a public-sector union may be deducted from an employee, nor may any other attempt be made to collect such a payment, unless the employee affirmatively consents to pay." Reprinted courtesy of Payne & Fears attorneys Amy R. Patton, Blake A. Dillion and Eric C. Sohlgren Ms. Patton may be contacted at arp@paynefears.com Mr. Dillion may be contacted at bad@paynefears.com Mr. Sohlgren may be contacted at ecs@paynefears.com Read the court decision
Read the full story...
Reprinted courtesy of

Pulte’s Kitchen Innovation Throw Down

December 10, 2015 — Beverley BevenFlorez-CDJ STAFF
Pulte Group’s national purchasing director, Kellee Hansen, created a kitchen competition where six unaffiliated manufacturers competed against each other to build a kitchen vignette based on three consumer segments, reported Builder Online. On October 19th, each team had fifteen minutes to present their vignettes to about 100 people. “In our industry, I think we lack some collaboration, historically,” Hansen told Builder Online. “Listening to our suppliers just makes us better and it makes us better as an industry. I think it raises the level for all our peers as well when we listen to our manufacturers.” Read the court decision
Read the full story...
Reprinted courtesy of

Drone Operation in a Construction Zone

August 17, 2020 — Mark R. Berry & Freddy X. Muñoz - Peckar & Abramson
The potential uses of unmanned aircraft systems (UAS) in the construction industry continue to expand as new technologies enter the market and construction companies realize UAS can perform unique tasks at tremendous cost savings. The full technological capabilities of UAS are, however, limited by law for public safety reasons. UAS share airspace with traditional passenger, military and cargo aircraft, and are potential hazards for humans below. The risk of potential catastrophic collisions has led to a careful approach to the adoption of this technology. All U.S. airspace is exclusively regulated by the Federal Aviation Administration (FAA), and therefore, most drone regulation originates from this agency. Many states and localities have also enacted additional limits on UAS operations, and many of these nonfederal regulations are presently on unsure footing after a federal court ruling in Singer v. Newton invalidated a local regulation that conflicted with FAA regulations. What is clear is that all commercial UAS operations must comply with FAA regulations. Any drone operation conducted by any private company, even through use of an employee’s personal drone, would constitute commercial operation subject to regulation. Reprinted courtesy of Mark R. Berry, Peckar & Abramson and Freddy X. Muñoz, Peckar & Abramson Mr. Berry may be contacted at mberry@pecklaw.com Mr. Muñoz may be contacted at fmunoz@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES