What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Product Manufacturers Beware: You May Be Subject to Jurisdiction in Massachusetts
July 05, 2023 —
Timothy Keough & Audrey Schoenike - White and Williams LLPSay you are a Floridian product manufacturer that does business in Massachusetts and you receive a Complaint filed in Massachusetts that alleges your product injured a Nova Scotian resident in Nova Scotia. You know that the only time that product was in Massachusetts was during its transport up the eastern seaboard to its final destination at a retailer in Nova Scotia. Can you be hailed into a Massachusetts court for this accident? The answer is seemingly not so simple following the Supreme Judicial Court’s holding in Doucet v. FCA US LLC.
On June 8th, the Massachusetts Supreme Judicial Court, in Doucet v. FCA US LLC, held that FCA US LLC is subject to jurisdiction in Massachusetts for a personal injury action arising out of a motor vehicle accident that occurred in New Hampshire.
No. SJC-13354, slip. op. (Mass. June 8, 2023). The vehicle had been purchased in New Hampshire by a New Hampshire resident. The Court explained that federal due process does not require a causal connection between a company’s business dealings with the jurisdiction and the injury; instead, a mere relationship between the business dealings and the injury will suffice to establish jurisdiction. Because the vehicle at issue was first sold in Massachusetts and FCA US LLC had extensive business dealings unrelated to the vehicle in question in Massachusetts, the Court concluded that a strong enough relationship existed between FCA US LLC, Massachusetts, and the litigation for jurisdiction to exist.
Reprinted courtesy of
Timothy Keough, White and Williams LLP and
Audrey Schoenike, White and Williams LLP
Mr. Keough may be contacted at keought@whiteandwilliams.com
Ms. Schoenike may be contacted at schoenikea@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
Circumstances In Which Design Professional Has Construction Lien Rights
February 24, 2020 —
David Adelstein - Florida Construction Legal UpdatesIf you are a design professional (architect, landscape architect, interior designer, engineer, surveyor, or mapper) you have construction lien rights in the event you are not paid. This does not mean your lien rights are absolute so it is important to understand the circumstances which allow you to record a construction lien on a project. These circumstances are contained in Florida Statute s. 713.03:
(1) Any person who performs services as architect, landscape architect, interior designer, engineer, or surveyor and mapper, subject to compliance with and the limitations imposed by this part, has a lien on the real property improved for any money that is owing to him or her for his or her services used in connection with improving the real property or for his or her services in supervising any portion of the work of improving the real property, rendered in accordance with his or her contract and with the direct contract.
(2) Any architect, landscape architect, interior designer, engineer, or surveyor and mapper who has a direct contract and who in the practice of his or her profession shall perform services, by himself or herself or others, in connection with a specific parcel of real property and subject to said compliances and limitations, shall have a lien upon such real property for the money owing to him or her for his or her professional services, regardless of whether such real property is actually improved.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
New York Court Grants Insured's Motion to Dismiss Construction Defect Case and Awards Fees to Insured
February 05, 2024 —
Tred R. Eyerly - Insurance Law HawaiiThe New York Supreme Court granted the insured's motion to dismiss the insurer's complaint seeking relief on its duty to indemnity and awarded fees to the insured. Utica Mut. Ins. Co. v. Crystal Curtain Wall Sys. Corp., 2023 N.Y. Misc. LEXIS 22368 (N.Y. Sup. Ct. Nov. 27, 2023).
The case arose from a construction-related property damage action. Crystal entered a subcontract with the general contractor to design and install window and curtain systems in mixed residential and commercial buildings. When unit owners took possession, water infiltration during a rainstorm caused property damage and moldy conditions.
The unit owners sued asserting claims against Crystal for the cost of repair or replacement of the allegedly defective curtain wall, damage to unit owners' personal property, diminution in value of the units, and delay damages consisting of increasing interest and carrying costs.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
ConsensusDOCS Updates its Forms
October 21, 2015 —
Christopher G. Hill – Construction Law MusingsAs reported recently in ENR Magazine, among other publications, the ConsensusDOCS folks have updated their contract forms. Why is this news?
First of all, it’s only been around three and a half years since these documents were officially released and this release is about 18 months sooner than anticipated (the original revision cycle was to be 5 years). Why the revision? According to my friend and counsel to ConsensusDOCS, Brian Perlberg, one major rationale is that “the economics of the construction industry today looks nothing like it did [in 2007.”
Among the changes are several terminology changes (“constructor” instead of “contractor” for instance), the addition of mandatory green building design as a basic service (these forms already have a Green Building Addendum) if included in the Owner’s plan and the ability to provide for prevailing party attorney fees (before both sides of a dispute bore their own fees).
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, Law Office of Christopher G. Hill, PCMr. Hill may be contacted at
chrisghill@constructionlawva.com
Broker's Motion for Summary Judgment on Negligence Claim Denied
July 30, 2018 —
Tred R. Eyerly - Insurance Law HawaiiAfter being sued for negligence for failing to secure proper coverage, the broker was unsuccessful in seeking dismissal by way of summary judgment. Liverman Metal Recycling, Inc. v. Arthur J. Gallagher & Co., 2018 U.S. Dist. LEXIS 87957 (E.D. N.C. May 25, 2018).
Plaintiffs were two companies, Empire and Liverman, that processed scrap metal. They were in the process of merging under a management plan by which Empire would acquire Liverman. As part of the plan, Empire's employees were moved on to Liverman's payroll processing system. Concurrently, Liverman renewed its workmen's compensation policy. Defendant Arthur J. Gallagher & Company, an insurance broker, handled the renewal with the insurer, Bridgefield Insurance Company.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
Certificate of Merit to Sue Architects or Engineers Bill Proposed
May 03, 2011 —
CDJ STAFFNorth Carolina may become the twelfth state to require a Certificate of Merit to sue an architect or engineer. If North Carolina Senate Bill 435 (SB435) passes, then plaintiffs when filing a complaint will need to also attach an affidavit of a third-party licensed professional engineer or architect stating that the case has merit.
SB435 is a short two pages in its current form. The bill states that the “third-party licensed professional engineer or licensed architect shall (i) be competent to testify and hold the same professional license and practice in the same area of practice as the defendant design professional and (ii) offer testimony based upon knowledge, skill, experience, education, training, and practice. The affidavit shall specifically state for each theory of recovery for which damages are sought, the negligence, if any, or other action, error, or omission of the design professional in providing the professional service, including any error or omission in providing advice, judgment, opinion, or a similar professional skill claimed to exist and the factual basis for each such claim. The third-party licensed professional engineer or licensed architect shall be licensed in this State and actively engaged in the practice of engineering or architecture respectively.”
A few of the amendments allude to disciplining design professionals who certify civil actions that are without merit. The bill has been referred to the Committee on Judiciary I.
While North Carolina is considering enacting a Certificate of Merit law, eleven other states already require one, including Arizona, California, Colorado, Georgia, Maryland, Minnesota, New Jersey, Oregon, Pennsylvania, South Carolina, and Texas. Christopher D. Montez, a partner with Thomas, Feldman & Wilshusen, LLP, has written a useful summary for each state’s certificate of merit scheme.
Read the text of SB435
Track the progress of SB435
Read more from Christopher D. Montez’s article on Thomas, Feldman & Wilshusen, LLP site
Read the court decisionRead the full story...Reprinted courtesy of
How a Maryland County Created the Gold Standard for Building Emissions Reduction
May 24, 2021 —
Pam McFarland - Engineering News-RecordMontgomery County, Md. is generating significant buzz among U.S. municipalities aiming to reduce greenhouse gas emissions from buildings.
Reprinted courtesy of
Pam McFarland, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
