Second Circuit Affirms Win for General Contractor on No Damages for Delay Provision
September 02, 2024 —
Bill Wilson - Construction Law ZoneIn NASDI, LLC v. Skanska Koch Inc. Kiewit Infrastructure Co. (JV), 2024 WL 1270188 (2d Cir. Mar. 26, 2024), the U.S. Court of Appeals for the Second Circuit affirmed the District Court’s grant of summary judgment dismissing a subcontractor’s delay claim against a general contractor on a public project in New York state. The Court enforced a typical no-damages-for-delay provision to bar the subcontractor’s breach of contract claim. The no-damages-for-delay provision in the subcontract at issue provided:
NO DAMAGE FOR DELAY. Except as otherwise provided …, Subcontractor agrees that it shall have no Claim against Contractor for any loss or damage it may sustain through delay, disruption, suspension, stoppage, interference, interruption, compression, or acceleration of Subcontractor’s Work (‘Delay Damages’) caused or directed by Contractor for any reason, and that all such Claims shall be fully compensated for by Contractor’s granting Subcontractor such time extensions as it is entitled to as a result of any of the foregoing.
Read the court decisionRead the full story...Reprinted courtesy of
Bill Wilson, Robinson & Cole LLPMr. Wilson may be contacted at
wwilson@rc.com
Major Changes in Commercial Construction Since 2009
December 11, 2013 —
CDJ STAFFA new report from Jones Lang LaSalle tracks some of the changes that the commercial building industry has seen since 2009. One important change is that financing has returned. In reviewing the report, Buildings.com notes that “commercial lending conditions are improving.” A less positive change is that construction costs have gone up, with the increase in residential construction pushing prices up in commercial construction. Green construction has gone from a luxury to something owners and developers want.
Read the court decisionRead the full story...Reprinted courtesy of
Business and Professions Code Section 7031, Demurrers, and Just How Much You Can Dance
February 14, 2022 —
Garret Murai - California Construction Law BlogFights between owners and contractors under Business and Professions Code section 7031 can get nasty and detailed. An owner’s remedy under Section 7031, as courts have stated, can be “harsh[ ],” “draconian” and even “unjust” and damages can be significant. Panterra GP, Inc. v. Superior Court, 2022 WL 289216 (2022), a case decided this past month, is no different. It even involved a disagreement between the very justices deciding the case.
The Panterra GP Case
Panterra GP, Inc. was a licensed general contractor. Rosedale Bakersfield Retail VI, LLC and Movie Grill Concepts XX, LLC intended to hire Panterra GP to perform renovation work at the Studio Movie Grill in Bakersfield, California, but drafted a construction contract mistakenly listing Panterra Development Ltd., LLP as the contractor on the project. Panterra GP was the general partner of Panterra Development.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Safety Accusations Fly in Dispute Between New York Developer and Contractor
July 01, 2019 —
Richard Korman - Engineering News-RecordThe developer of a New York City high rise and the project's former prime contractor are trading unusually nasty safety related accusations in a dispute over the contractor's exit from the project. The contractor, New York City-based Pizzarotti, claims the settlement of the structure in soft soils creates hazards in future work that could send building components crashing to the streets. In reply, developer Fortis Property Group says the contractor’s uneven pace of work is to blame for what it sees as only slab misalignments that don’t compromise safety in any way.
Read the court decisionRead the full story...Reprinted courtesy of
Richard Korman, ENRMr. Korman may be contacted at
kormanr@enr.com
Required Contract Provisions for Construction Contracts in California
October 08, 2014 —
Garret Murai – California Construction Law BlogOne question I get fairly often when drafting or reviewing construction contracts is what provisions, if any, are required in construction contracts in California. This is, of course, different than what should be included in a construction contract which is a post for another day. So, here you go:
Provisions Required in All Construction Contracts
There’s only one requirement applicable to all construction contracts in California. And, that is, that you must include your California contractor’s license number if you are performing or bidding on work requiring a license. California Business and Professions Code section 7030.5 requires that licensed contractors include their license number in “(a) all construction contracts; (b) subcontracts and calls for bid; and (c) all forms advertising, as prescribed by the register of contractors, used by such person.”
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Kronick Moskovitz Tiedemann & GirardMr. Murai may be contacted at
gmurai@kmtg.com
New California "Construction" Legislation
November 08, 2018 —
Richard H. Glucksman, Esq. & Chelsea L. Zwart, Esq. - Chapman Glucksman Dean Roeb & BargerGovernor Jerry Brown signed two potentially impactful Senate Bills relating to the construction of apartment buildings late last month. These Bills, discussed further below, were introduced, in part, in response to the Berkeley balcony collapse in June 2015, which was determined by the California Contractors State License Board to be caused by the failure of severely rotted structural support joists the repair of which were deferred by the property manager, despite indications of water damage.
SENATE BILL 721 ESTABLISHES HEIGHTENED “LOAD-BEARING” INSPECTION REQUIREMENTS
On August 21, 2018, the California State Senate passed SB 721, one of two bills by Senator Jerry Hill introduced this year seeking to address the safety of multifamily rental residences. Now that the Governor has signed the Bill, a new section will be added to the California Health and Safety Code, requiring that every 6 years, destructive testing be performed on at least 15% of each type of load-bearing, wood framed exterior elevated element (such as balconies, walkways, and stair landings) in apartment buildings with 3 or more units. Interestingly, prior to being passed by the State Senate, SB 721 was revised in June 2018, such that the inspection requirements do not apply to common interest developments (i.e., condominiums).
As set forth in the new Health and Safety Code Section 17973:
"the purpose of the inspection is to determine that exterior elevated elements and their associated waterproofing elements are in a generally safe condition, adequate working order, and free from any hazardous condition caused by fungus, deterioration, decay, or improper alteration to the extent that the life, limb, health, property, safety, or welfare of the public or the occupants is not endangered."
The inspection must be paid for by the building owner and performed by a licensed contractor, architect, or civil or structural engineer, or a certified building inspector or building official from a recognized state, national, or international association. Emergency repairs identified by the inspector must be made immediately. For non-emergency repairs, a permit must be applied for within 120 days and the repair completed within 120 days of the permit’s issuance. If repairs are not completed within 180 days, civil penalties of $100-$500 per day may be imposed.
The required inspection must be completed by January 1, 2025 and every 6 years thereafter, unless an equivalent inspection was performed during the 3 years prior to January 1, 2019, the effective date of the new law. For a building converted to condominiums that will be sold after January 1, 2019, the inspection required by Health and Safety Code Section 17973, must be performed prior to the first close of escrow.
SENATE BILL 1465 SETS CONTRACTOR REPORTING REQUIREMENTS
The Governor also signed SB 1465, adding Sections 7071.20, 7071.21, and 7071.22 to the California Business and Professions Code. The new law requires that a contractor licensed with the Contractors’ State License Board "report to the registrar in writing within 90 days after the licensee has knowledge of any civil action resulting in a final judgment, executed settlement agreement, or final arbitration award in which the licensee is named as a defendant or crossdefendant, filed on or after January 1, 2019," that meets certain and specific criteria, including that it is over $1 million and arises out of an action for damages to a property or person allegedly caused by specified construction activities of the contractor on a multifamily rental residential structure.
Where more than one contractor was named as a defendant or cross-defendant, each of the contractors apportioned more than $15,000 in liability must report the action. Importantly, the new statute also imposes similar reporting requirements on insurers of contractors. SB 1465 also addresses an impacted party’s failure to comply with the reporting requirements.
COMMENT
Both SB 721 and SB 1465 are potentially significant and seek “legislative reform” to address construction issues by placing a greater burden on apartment owners as well as builders and subcontractors. How pragmatic and what impact they will have on the industry is obviously developing. If you are interested in receiving further detail concerning the Bills, please contact us. We are analyzing the new legislation and its intent and will be providing our ongoing comments.
Read the court decisionRead the full story...Reprinted courtesy of
RICHARD H. GLUCKSMAN, ESQ. CHELSEA L. ZWART, ESQ., CGDRBChelsea L. Zwart may be contacted at
czwart@cgdrblaw.com
Aecmaster’s Digital Twin: A New Era for Building Design
May 06, 2024 —
Aarni Heiskanen - AEC BusinessI sat down with Anssi Auvinen, the CEO and founder of Finnish startup Aecmaster, to discuss the future of design and how the company plans to make it happen. Anssi envisions data-driven design as the next radical change in the AEC sector.
Anssi Auvinen started working in the building industry as a 16-year-old construction worker. Since then, he has acquired two master’s degrees: structural engineering and architecture.
During his career, Anssi has witnessed how the digitalization of the design sector has progressed, but the results for both designers and building owners could have been more impressive. That inspired him in 2019 to start up
Aecmaster, a software and consulting firm that aims to fulfill the promise of digitalization. The company’s software product launched in January 2024.
The need for digital twins
Anssi states that you can’t say you own a building until you possess its digital assets, the digital twin.
Read the court decisionRead the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
aec-business@aepartners.fi
New Zealand Using Plywood Banned Elsewhere
October 30, 2013 —
CDJ STAFFCopper chromium arsenate helps protect wood against insect damage and fungal growth. Unfortunately, its use leads to arsenic exposure. The safety concerns over CCA for both construction workers and the people who later use the buildings have led to the CCA-treated plywood being banned or restricted in most countries, including the United States, Canada, France, the United Kingdom, and Germany.
New Zealand is not on the list of countries restricting or banning CCA-treated wood. Dr. Merial Watts, a science coordinator for Pesticide Action Network NZ described the product as an “unacceptable public health risk,” and said that “wrapping homes in CCA-treated plywood is a very bad idea.”
One construction official, speaking anonymously, noted that “workers have to handle it with gloves and full body suits,” but those guidelines may not be followed. A foreman on a building site said “I know about the treatment but I don’t take many precautions.”
Read the court decisionRead the full story...Reprinted courtesy of