Fairfield Connecticut Building Expert Directory

Drones Used Despite Uncertain Legal Consequences

March 12, 2015 — Beverley BevenFlorez-CDJ STAFF
Francis Manchisi of Wilson Elser discussed how several industries—including construction—are using unmanned aircraft systems or unmanned aerial vehicles, commonly referred to as drones, and are either exploiting legal loopholes or ignoring laws altogether. The Federal Aviation Administration (FAA) has recently released a Notice of Proposed Rulemaking, which is now in a 60-day “notice and comment” period that is open to the public. Once that period ends, the FAA will consider the comments before putting the rules into law. According to Manchisi, the proposed rules include:

Unmanned aircraft must weigh less than 55 lbs. (25 kg).
Unmanned aircraft must remain within visual line of sight (VLOS) of the operator or visual observer.
Maximum altitude is 500 feet above ground level.
Preflight inspection by the operator is required.
Operators are required to obtain an unmanned aircraft operator certificate with a sUAS rating from the FAA.

Read the court decision
Read the full story...
Reprinted courtesy of

Are Modern Buildings Silently Killing Us?

May 16, 2022 — Michael Rubino - Construction Executive
Construction, in general, is a rapidly evolving industry as contractors, architects, and engineers are tasked with keeping up with government regulations, building practices and technological innovations. While growth and evolution are pivotal components of successful projects and businesses, it’s led to a few issues, one of which involves mold. Like the construction industry, the world of mold is evolving as more research, understanding, and awareness develops, highlighting its prevalence in buildings and the effect it can have on the health of those exposed. What industry professionals are witnessing time and again is an increasing occurrence of individuals reaching out and asking for help after experiencing exposure that led to chronic illness. The reality is that modern buildings are contributing to this rise. The Top of the Funnel An issue aiding in mold’s prevalence in modern-day buildings is the way in which they are built. In an effort to achieve net-zero energy-efficient buildings, construction professionals have adopted the technique of sealing buildings as tightly as possible. While this transition reduces energy costs in the building, it also introduces a few new problems that aren't always addressed in modern construction. One such issue is how the lack of airflow between the indoor and outdoor environments can lead to a buildup of contaminant particles in the building. Reprinted courtesy of Michael Rubino, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Home Sales and Stock Price Up for D. R. Horton

February 04, 2013 — CDJ STAFF
They call themselves "America's Builder," and in the last three months of 2013, D. R. Horton exceeded the market's predictions of how many of the homes they built would translate into sales. At the end of 2011, they had $27.7 million in earnings. At the end of last year, they saw $66.3 million in earnings. The 2011 earnings work out to 9 cents per share. Analysts were expecting 14 cents per share, but D. R. Horton delivered 20 cents per share. The stock market responded with a 3.7% increase in the home builder's stock price, upping it by 79 cents to $22.10. Read the court decision
Read the full story...
Reprinted courtesy of

Pennsylvania Modernizes State Building Code

October 30, 2018 — Joanna Masterson - Construction Executive
The Pennsylvania Independent Regulatory Review Commission has updated the state’s Uniform Construction Code to align with the 2015 International Code —a family of comprehensive and coordinated building codes used in all 50 states that are updated regularly and take into account the latest health and safety technology and building science advancements. Reprinted courtesy of Joanna Masterson, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Texas “your work” exclusion

January 06, 2012 — CDCoverage.com

In American Home Assurance Co. v. Cat Tech, L.L.C., No. 10-20499 (5th Cir. Oct. 5, 2011), claimant Ergon hired insured Cat Tech to perform service on a reactor at Ergon’s refinery. During a start-up of the reactor after Cat Tech had completed its work, the reactor suffered damage. Cat Tech performed additional service and repairs. However, again upon start-up of the reactor, it suffered additional damage. Ergon hired another contractor to repair the reactor. Ergon initiated arbitration proceedings against Cat Tech. Cat Tech’s CGL insurer American Home defended Cat Tech against the Ergon arbitration under a reservation of rights.

Read the full story…

Reprinted courtesy of CDCoverage.com

Read the court decision
Read the full story...
Reprinted courtesy of

How to Determine the Deadline for Recording a California Mechanics Lien

September 17, 2015 — William L. Porter, Esq. – Porter Law Group Bulletin
The California Mechanics Lien is one of the most valuable collection devices available to contractors, subcontractors and suppliers who are unpaid for work performed and materials supplied in relation to a California private works construction project. The mechanics lien allows the claimant to sell the property where the work was performed in order to obtain payment. As noted below, in order to pursue this remedy, certain deadlines must be met. Know Your Mechanics Lien Filing Deadlines Generally Working within deadlines is absolutely crucial to preserving mechanics lien rights under California law. The deadlines differ, depending on whether you are a ”direct” contractor, also known as “original” or “prime” contractor (one who contracts directly with the property owner) or a subcontractor or material supplier. The primary differences are that the direct contractor is only required to serve the “Preliminary Notice” on the Construction Lender (Civil Code section 8200-8216), whereas the subcontractor and material supplier must serve not only the Construction Lender, but also the Owner and Direct Contractor (see Civil Code section 8200(e)). Another difference is that a direct contractor has a longer period of time in which to record a mechanics lien after a valid “notice of completion” or a “notice of cessation” has been recorded (Civil Code sections 8180-8190), (60 days for original contractors as compared to 30 days for subcontractors and suppliers – See Civil Code sections 8412 and 8414). Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, The Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

“Based On”… What Exactly? NJ Appellate Division Examines Phrase and Estops Insurer From Disclaiming Coverage for 20-Month Delay

August 20, 2019 — Anthony L. Miscioscia and Timothy A. Carroll - White and Williams LLP
On May 28, 2019, the New Jersey Superior Court, Appellate Division examined the phrase “based on” in an assault-and-battery exclusion, finding that the phrase means “to make, form, or serve as the foundation of any claim, demand or suit.” C.M.S. Investment Ventures, Inc. v. American European Insurance Company, No. A-2056-17T3, 2019 N.J. Super. Unpub. LEXIS 1215, at *8-9 (N.J. Super. Ct. App. Div. May 28, 2019) (CMS). The CMS case is also notable because the Appellate Division held that a 20-month delay in disclaiming coverage was unreasonable and therefore warranted estoppel. In CMS, the insured was allegedly warned by its tenant about a faulty ground-floor window that failed to lock properly. Afterward, an intruder broke into the tenant’s apartment and sexually assaulted the tenant, who sued the insured on a premises liability claim. Before she filed suit, the tenant sought payment from the insured’s CGL insurer directly. The insurer denied coverage based on the assault-and-battery exclusion and closed the file, but never informed the insured. Later, the tenant sued the insured, which sought a defense and indemnity from its insurer, which again denied coverage based on the exclusion. The insured then sought a declaration of coverage on grounds that the exclusion was ambiguous, and the insurer “was estopped from denying coverage, because it waited [20] months to inform CMS of its coverage decision.” The trial court ruled in the insured’s favor which led to the appeal in CMS. Reprinted courtesy of Timothy Carroll, White and Williams LLP and Anthony Miscioscia, White and Williams LLP Mr. Miscioscia may be contacted at misciosciaa@whiteandwilliams.com Mr. Carroll may be contacted at carrollt@whiteandwilliams.com Read the court decision
Read the full story...
Reprinted courtesy of

No Damage for Delay? No Problem: Exceptions to the Enforceability of No Damage for Delay Clauses

October 18, 2021 — Chris Broughton, Jones Walker LLP - ConsensusDocs
Introduction: Under a no-damage-for-delay clause, the owner is not liable for any monetary damages resulting from delays on the project. In lieu of monetary recovery, the contractor’s remaining remedy is a non-compensatory time extension. These clauses are common at the contractor-subcontractor interface as well. While no-damage-for-delay clauses are enforced in most jurisdictions, some states, either by statute or case law, have limited the enforceability of no-damage-for-delay clauses. Other states have also limited the enforceability of these clauses on state government contracts, and a select few have outlawed them on all projects regardless if they are publicly or privately owned. Additionally, for subcontractors on federal projects, the Miller Act may provide a way to avoid no-damage-for-delay and recover against the general contractor’s payment bond. This article provides an overview of no-damage-for-delay clauses and the exceptions to enforcement of these clauses. However, due to the consequences of a no-damage-for-delay clause, it is important to know the terms of your contract and the law that governs your project. Read the court decision
Read the full story...
Reprinted courtesy of Chris Broughton, Jones Walker LLP
Mr. Broughton may be contacted at cbroughton@joneswalker.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES