The Future of Construction Defects in Utah Unclear
December 11, 2013 —
CDJ STAFFIn recent years, more courts have started to view construction defects as accidents, covered under insurance policies. In a post on the Parr Brown Gee & Loveless web site, Jeffrey D. Stevens writes that “the number of courts siding with insurance companies to deny contractors and subcontractors insurance coverage in construction defect lawsuits has been shrinking.” Recently, the Supreme Court of West Virginia “switched sides on this issue completely.”
The Utah Supreme Court has not made a ruling on this, but the Federal District Court for the District of Utah and the Tenth Circuit have looked at Utah law and concluded that “under Utah law damage caused by construction defects is not accidental.” But in another case, “the district court determined that property damage allegedly caused by defective or defectively installed windows was caused by an accident.”
Mr. Stevens thinks that “it is likely” that the Utah Supreme Court “will follow the increasing number of courts that have held that damage caused by construction defects is an accident for insurance purposes.
Read the court decisionRead the full story...Reprinted courtesy of
Best Lawyers Recognizes Twelve White and Williams Lawyers
September 15, 2016 —
White and Williams LLPThe 2017 Best Lawyers in America list includes twelve White and Williams lawyers. Inclusion in Best Lawyers is based entirely on peer-review. The methodology is designed to capture, as accurately as possible, the consensus opinion of leading lawyers about the professional abilities of their colleagues within the same geographical area and legal practice area. Best Lawyers employs a sophisticated, conscientious, rational, and transparent survey process designed to elicit meaningful and substantive evaluations of quality legal services.
2017 Best Lawyers
- Frank Bruno, Patent Law
- Richard Campbell, Product Liability Litigation – Defendants
- James Coffey, Mergers and Acquisitions Law
- Timothy Davis, Real Estate Law
- William Hussey, Tax Law; Trusts and Estates
- Michael Kraemer, Employment Law - Management; Labor Law - Management; Litigation - Labor and Employment
- Randy Maniloff, Insurance Law
- John Orlando, Personal Injury Litigation - Defendants
- Thomas Rogers, Real Estate Law
- Joan Rosoff, Real Estate Law
- Craig Stewart, Insurance Law; Product Liability Litigation - Defendants
- William Taylor, Construction Law
Read the court decision
Read the full story...
Reprinted courtesy of White and Williams LLP
Determining Duty to Defend in Wisconsin Does Not Include Extrinsic Evidence
September 22, 2016 — Tred R. Eyerly – Insurance Law Hawaii
The policyholder's attempt to extend the duty to defend analysis beyond the complaint's allegations and the four-corners of the policy failed before the Wisconsin Supreme Court. Water Well Solutions Service Group Inc. v. Consolidated Ins. Co., 2016 Wisc. LEXIS 163 (Wis. Sup. Ct. June 30, 2016). Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com
The Practical Distinction Between Anticipatory Breach and Repudiation and How to Deal with Both on Construction Projects
June 10, 2024 — Devon Griger - ConsensusDocs
When a multilevel construction project is underway and a contractor or subcontractor isn’t performing as expected, it can be difficult to know how to address the low performance without putting the parties’ contract and good working relationship at risk. However, there may come a time when poor performance lapses into a something much worse: an anticipatory breach or repudiation of the subject contract.
Imagine Scenario One: You are a general contractor managing a large-scale construction project and one of your subcontractors is falling behind on their work. The project manager for the subcontractor calls you and says, “Look, I don’t think we’re going to be able to hit our next milestone, and probably not the next one after that.” A conversation like this would generally trigger concern for most general contractors, but it would not necessarily invoke panic. These types of delay conversations are not uncommon on large scale projects.
Compare that example, however, with Scenario Two, where the subcontractor instead says, “We received an offer to work another job for much more money, so we’re leaving the project site today and will not be returning.” This is obviously different (and potentially worse) than Scenario One, and likely cause for much greater concern. Read the court decision
Read the full story...
Reprinted courtesy of Devon Griger, Jones Walker
Ms. Griger may be contacted at dgriger@joneswalker.com
Real Estate & Construction News Roundup (1/24/24) – Long-Term Housing Issues in Hawaii, Underperforming REITs, and Growth in a Subset of the Hotel Sector
February 19, 2024 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law Blog
In our latest roundup, commercial real estate’s relationship with technology, towns and cities across the country prevent dollar stores from opening, empty offices and other commercial buildings are reused for housing, and more!
Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team
Burg Simpson to Create Construction Defect Group
November 06, 2013 — CDJ STAFF
Burg Simpson Eldredge Hersh & Jardine, P.C. has announced that the attorneys of Sullan2, Sandgrund, Perczak & Nuss, P.C. will be joining them as S2SPN Construction Defect Group of Berg Simpson. The group will be headquartered at Burg Simpson’s Engelwood offices.
The combined firms will comprise 55 attorneys. Michael Burg, founding shareholder at Burg Simpson, said that “in Colorado for the past 29 years, these lawyers have provided the highest level of construction defect representation.” His counterpart, Scott Sullan of Sullan2, Sandgrund, Perczak & Nuss said that he and his colleagues are “delighted to be a part of the Burg Simpson team.” The two firms join forces effective January 1, 2014.
Read the court decision
Read the full story...
Reprinted courtesy of
Harlem Developers Reach Deal with Attorney General
February 25, 2014 — Beverley BevenFlorez-CDJ STAFF
Joseph Scarpinito and Shiraz Sanjana, developers of the Mirada condominium in Harlem, New York can avoid a contempt charge from state Attorney General Eric Schneiderman, “if they make the required repairs and obtain a permanent certificate of occupancy at the property,” according to The Real Deal.
Scarpinito and Sanjana “agreed to deposit $200,000 into an escrow account and make repairs to stop flooding and other defects at the 161 East 110th Street condo, which are required to obtain a certificate of occupancy from the city Department of Buildings.”
Last December, the Attorney General “filed suit against the developers, alleging they submitted false filings to his office in claiming that Scarpinito’s 83-year-old mother was the actual developer of the 68-unit condo.” Furthermore, the condo board lawyers submitted a complaint to Schneiderman “detailing extensive defects in the building, including water leaks entering the building from the roof and façade.”
The developers have been ordered “to submit weekly reports to the AG’s office detailing progress on the repairs and obtaining the certificate of occupancy.” Read the court decision
Read the full story...
Reprinted courtesy of
10 Safety Tips for General Contractors
October 09, 2018 — Eric Weisbrot – JW Surety Bonds
The construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decision
Read the full story...
Reprinted courtesy of
