Fairfield Connecticut Building Expert Directory

Manhattan to Get Tall, Skinny Tower

October 21, 2013 — CDJ STAFF
At its narrowest, it’s going to be only sixty feet wide. And that will run 1,350 feet into the air. A new apartment tower is going up in New York, and one of its amenities will be that residents in the top floors will be able to look down on the Empire State Building. “It may be the skinniest building ever,” said Gregg Pasquarelli, the principal of SHoP Architects, the firm that designed the building. He estimates its ratio of height to width as “something like 25-to-1.” For all its height, the building will be divided into about 100 units. As part of the development deal, the tower will incorporate and preserve the landmark Steinway Hall. The chair of the Landmarks Preservation Commission, Robert Tierney, described it as “the best of both worlds of new construction and design and historic preservation.” Read the court decision
Read the full story...
Reprinted courtesy of

House Passes $25B Water Resources Development Bill

June 27, 2022 — Tom Ichniowski - Engineering News-Record
A key federal infrastructure bill advanced with approval in the House of a measure providing $25.3 billion to help finance 22 Army Corps of Engineers storm and flood protection, ecological restoration, harbor dredging and other projects around the country. Reprinted courtesy of Tom Ichniowski, Engineering News-Record Mr. Ichniowski may be contacted at ichniowskit@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Steel-Fiber Concrete Link Beams Perform Well in Tests

December 21, 2016 — Nadine M. Post – Engineering News-Record
A recent series of dynamic tests demonstrates that there are several types and doses of steel-fiber reinforcement that can be used in performance-based seismic design of coupling beams—headers that link openings in concrete shear walls—to reduce rebar congestion. The tests, performed at the University of Wisconsin, are called “a step in the right direction” by the structural engineer who pioneered the use of SFR concrete. Read the court decision
Read the full story...
Reprinted courtesy of Nadine M. Post, Engineering News-Record
Ms. Post may be contacted at postn@enr.com

General Contractor Gets Fired [Upon] for Subcontractor’s Failure to Hire Apprentices

September 23, 2024 — Garret Murai - California Construction Law Blog
As most public works contractors know, Labor Code section 1777.5 requires the hiring of apprentices on public works projects and, under Labor Code section 1777.7, violations are subject to civil penalties of up $100/day and up to $300/day days for repeated violations within a three-year period. In Lusardi Construction Co. v. Dept. of Industrial Relations, 102 Cal.App.5th (2024), a prime contractor learned the hard way that not only could it be penalized for its failure to hire apprentices but that it could also be liable for its subcontractor’s failure to hire apprentices. Forewarned is to be forearmed. The Lusardi Construction Case In 2014, general contractor Lusardi Construction Company hired subcontractor Pro Works Contracting to perform iron reinforcing work on a public works project owned by the San Marcos Unified School District. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

PFAS and the Challenge of Cleaning Up “Forever”

July 31, 2023 — PFAS Team - Gravel2Gavel Construction & Real Estate Law Blog
From a stream of legal challenges, to ever-expanding regulations on things like cosmetics and drinking water, PFAS are the “forever chemicals” keeping companies and consumers on high alert. While industries scramble to remove the synthetic compounds from products, scientists are researching new techniques for scrubbing PFAS from the environment. There is money to be had for those who can find a more streamlined method of purging the substances—the U.S. Army Corps of Engineers has an $800 million contract on the table for the handling, destruction and replacement of PFAS-laden fire-fighting foam—leaving technology companies racing to create solutions. The three main PFAS cleaning techniques currently relied upon can be very effective but are also costly and may leave questionable byproducts in their wake. The established approaches include:

Granular Activated Carbon. As one of the most studied treatments for PFAS removal, granular activated carbon is often used in water treatment plants. Large beds of carbon essentially soak up the unwanted chemicals. After the Sweeney Water Plant in North Carolina, whose water source is downstream from a fluorochemical-producing Chemours plant, was found to be contaminated with PFAS, the plant invested around $46 million into upgraded activated carbon systems. Once installed, these systems cost roughly $2.9 million to operate yearly, as the carbon needs to be replaced each time it reaches capacity. Though pricey, the plant says that the process now clears close to 100% of PFAS.

Read the court decision
Read the full story...
Reprinted courtesy of PFAS Team, Pillsbury

Six Inducted into California Homebuilding Hall of Fame

February 04, 2013 — CDJ STAFF
The California Homebuilding Foundation has inducted six industry leaders into their Homebuilding Hall of Fame, in recognition of both their professional accomplishments and their philanthropic and volunteer activities. The six homebuilders to be honored are Sherman S. Haggerty of Lennar Corp., Joe Head of the SummerHill Land Division of SummerHill Homes, Robert B. MacLeod of Newland Real Estate Group, John J. Ryan Jr. of Brookfield Homes Bay Area, Tom Sudberry of Sudberry Properties, and Bill Watt of Baywood Development Group. Read the court decision
Read the full story...
Reprinted courtesy of

CISA Clarifies – Construction is Part of Critical Infrastructure Activities

April 20, 2020 — Brenda Radmacher & Ernest Isola - Gordon & Rees Construction Law Blog
After ongoing confusion by many over whether construction should be considered part of the “essential business,” during the COVID-19 pandemic, the Cybersecurity and Infrastructure Security Agency (CISA) issued an updated Coronavirus Guidance for America on March 28, 2020 to clarify construction’s critical role in supporting essential infrastructure. CISA’s initial advisory list referenced construction in regard to some areas such as energy and wastewater treatment, but it was unclear as to the whole of the construction industry. CISA’s update clarified that construction activities are included in its list of essential critical infrastructure workers. This new federal guidance should remove the ambiguity that led to varying responses by state and local officials halting some construction. The guidance clarifies that construction and related activities – including the manufacture and supply/delivery of supplies and equipment, permitting, safety, and inspections of projects – are covered as part of the critical infrastructure and economic activities. The ongoing challenge will be for construction activities to proceed in a way that protects workers and the general public from the spread of coronavirus. However, contractors are always resourceful and have been implementing safety measures effectively on projects with an unwavering commitment to safety and are ready to meet this challenge. In addition to following the guidance from the CDC, we recommend that contractors implement a comprehensive safety program for their employees as well as for all parties that come onto the jobsite. It is critical that contractors have clear a clear plan for communications with their teams to ensure compliance with the CDC recommendations. This should include what has recently become standard protocol or social distancing, not hosting large group meetings and conducting meetings online or via conference call, maintaining a six-foot distance between people, discouraging hand-shaking or other contact, not sharing tools, and sanitizing reusable PPE. Contractors also should also be sure to place safety posters about “How to Protect Yourself” where they can be readily seen and encourage staying home when sick, cough and sneeze etiquette, and hand hygiene at the entrance of a jobsite. We also recommend heightened site security including interviewing anyone coming to the jobsite. Reprinted courtesy of Brenda Radmacher, Gordon & Rees and Ernest Isola, Gordon & Rees Ms. Radmacher may be contacted at bradmacher@grsm.com Mr. Isola may be contacted at eisola@grsm.com Read the court decision
Read the full story...
Reprinted courtesy of

SAFETY Act Part II: Levels of Protection

June 21, 2024 — Lorelie S. Masters, Kevin W. Jones & Charlotte Leszinske - Hunton Insurance Recovery Blog
Part I of this series, SAFETY Act is Powerful Protection Against Emerging Liabilities, addressed the benefits of obtaining SAFETY Act coverage, including:

From a reputational perspective, SAFETY Act protection provides benefits even absent a security incident: it demonstrates that a knowledgeable federal agency has examined the relevant technology and determined that it is both safe and effective.
SAFETY Act protection can benefit companies taking steps to enhance the security of their physical premises and operations, or their cybersecurity defenses, to reduce their potential liability and enhance their reputation.
Other benefits include—depending on the level of protection—powerful liability protections including exclusive federal jurisdiction and choice of law for the venue where the incident occurred, caps on liability, prohibitions on punitive damages, and government contractor immunity.

This post will explain the levels of protection that a company can seek under the SAFETY Act. Reprinted courtesy of Lorelie S. Masters, Hunton Andrews Kurth, Kevin W. Jones, Hunton Andrews Kurth and Charlotte Leszinske, Hunton Andrews Kurth Ms. Masters may be contacted at lmasters@HuntonAK.com Mr. Jones may be contacted at kjones@HuntonAK.com Ms. Leszinske may be contacted at cleszinske@HuntonAK.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES