Melissa Dewey Brumback Invited Into Claims & Litigation Management Alliance Membership
October 14, 2013 —
CDJ STAFFMelissa Dewey Brumback has been invited to join the Claims & Litigation Management Alliance, an “invitation only” organization of insurance companies, litigation and risk managers, claims professionals, and attorneys. Ms. Brumback, an attorney at Ragsdale Ligget PPLC, has a practice that focuses on construction law and business disputes. Her clients include architects and engineers in construction-related claims. Ms. Brumbuck is respected as an author and lecturer on construction law.
The Claims & Litigation Management Alliance comprises the leaders of claims and litigation management. Members are risk and litigation managers, insurance and claims professionals, and corporate and outside counsel.
Read the court decisionRead the full story...Reprinted courtesy of
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Sanctions of $1.6 Million Plus Imposed on Contractor for Fabricating Evidence
March 16, 2017 —
Paul R. Cressman, Jr.King County Superior Court issued sanctions of $1,641,721 in favor of Gefco and against Cascade Drilling, Inc. and its President, Bruce Niermeyer, composed of $1,394,435 in attorneys’ fees and $247,286 in expert fees. [i]
Cascade Drilling is a contractor. Gefco manufactures and sells large drilling machinery. The dispute centered around a project that began in 2008. Cascade was hired to drill a water well at a housing development in Wheeler Canyon, California. Cascade used a 50K drilling rig purchased from Gefco. The pump drive shafts on the drilling rig failed four times. After each failure, Cascade ordered a replacement pump drive shaft from Gefco.
In September 2008, Cascade ordered drilling equipment for an unrelated drilling rig from Gefco, but did not pay Gefco. Gefco then sued to collect. Cascade admitted not paying, but asserted counterclaims alleging that Gefco was indebted to Cascade for non-conforming and defective goods, including the replacement pump drive shafts purchased from Gefco for the Wheeler Canyon project.
Read the court decisionRead the full story...Reprinted courtesy of
Paul R. Cressman, Jr., Ahlers & Cressman PLLCMr. Cressman may be contacted at
pcressman@ah-lawyers.com
The Hazards of Carrier-Specific Manuscript Language: Ohio Casualty's Off-Premises Property Damage and Contractors' E&O Endorsements
October 05, 2020 —
Theresa A. Guertin & Eric M. Clarkson - Saxe Doernberger & VitaRisk transfer in the construction industry depends heavily on industry-standard insurance language. Insurance provisions in subcontracts typically reference ISO standard insurance terminology or endorsements in order to guarantee (or, at least, attempt to secure) coverage for upstream parties. The contract may require, for example, that a subcontractor maintains general liability insurance on a “current ISO occurrence form,” and name upstream parties as additional insureds, and both parties will have a general understanding of what that entails for purposes of risk transfer.
Problems arise, however, when insurance companies stray from standard language, especially on issues that go to the heart of construction risk transfer. In some instances, provisions that track ISO language may contain subtle changes that seem to meet the contractual insurance requirements. Upon closer scrutiny, it could significantly change how a policy will respond to a given claim. Given the extent of potential liability arising from construction projects, if the insurance programs intended to back up risk transfer and indemnity agreements do not respond as expected, all the potentially liable parties may be left in the lurch.
Reprinted courtesy of
Theresa A. Guertin, Saxe Doernberger & Vita and
Eric M. Clarkson, Saxe Doernberger & Vita
Ms. Guertin may be contacted at tag@sdvlaw.com
Mr. Clarkson may be contacted at emc@sdvlaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Three Construction Workers Injured at Former GM Plant
March 26, 2014 —
Beverley BevenFlorez-CDJ STAFFIn Linden, New Jersey, three construction workers were injured “when they were apparently struck by steel girders while working at the former General Motors site” police told NJ.com.
Mayor Richard Gerbounka stated that the “[s]ix struts that would support the deck or ceiling of a warehouse collapsed.” He also mentioned that the city “has been trying to redevelop the former General Motors site for years, but has run into several obstacles, including lawsuits from nearby businesses opposed to retail construction.”
Several construction vehicles were “nearly buried under” debris and “[a]t least one I-beam girder and several decking struts—all metal—remain across several heavy construction vehicles,” NJ.com reported. The owner of the vehicles stated “he was told that workers were standing around the vehicles preparing to start their day when high winds knocked down at least one I-beam and several metal decking struts.”
In another article published late afternoon on March 26th, NJ.com reported that “high winds” were the cause of the accident. “The federal Occupational Safety and Health Administration is investigating the accident and all work at the site has been suspended pending the investigation,” according to the article. “Officials said OSHA inspectors had been at the scene once before, but declined to give details because of a continuing investigation.”
Read the full story, NJ.com AM...
Read the full story, NJ.com PM... Read the court decisionRead the full story...Reprinted courtesy of
Couple Claims Poor Installation of Home Caused Defects
December 30, 2013 —
CDJ STAFFRobert and Tracy Samosky of Spanishburg, West Virginia have filed a lawsuit claiming that the improper delivery of their modular home caused defects and damages, preventing them from actually using their home. The couple purchased a modular home from J&M Quality Construction for a home designed and built by Mod-U-Kraf Homes. They are suing the two firms for $50,000 in damages, reports the West Virginia Record.
Read the court decisionRead the full story...Reprinted courtesy of
New Jersey’s Independent Contractor Rule
January 07, 2015 —
Christopher G. Hill – Construction Law MusingsFor this week’s Guest Post Friday here at Musings, we welcome back Bennet Susser. Bennet is a founding member and shareholder of the New Jersey law firm, Jardim, Meisner & Susser, P.C. He has over 25 years’ experience in representing clients in all types of complex (and not so complex) litigation, including those involving construction actions. His Construction Law Practice Group has deep experience in the representation of property owners, developers, homeowners, design professionals, materials manufacturers, contractors and subcontractors in connection with construction of high-rise and other residential developments, condominium conversions of older rental properties, commercial property, mixed-use projects, and governmental buildings. Issues handled include: construction defects and deficiencies related to residential and commercial construction, including roofing defects, water intrusion, and structural life safety; construction delays; liens; hurricane recovery and rebuilding; insurance coverage disputes, including negotiation and resolution of insurance claims related to rebuilding; mold and mildew claims; and construction contracts and related documents, including loan documentation.
Construction litigation often seeks to foist the culpable conduct of contractors and subcontractors upon an owner or developer of commercial or residential real property. Sometimes, such conduct is warranted, especially when the owner/developer has a significant role in the manner in which the construction project work is to be conducted. However, there are times when the general contractor is the party calling the shots. Why should an owner/developer be charged with the conduct of other independent contractors over whom no control was exercised? Under certain circumstances, such party may be insulated from liability based on the “independent contractor rule.” Put another way, general contractors’ and subcontractors’ status as independent contractors do not impute liability to an owner/developer for their alleged wrongful conduct under the principles of respondeat superior and vicarious liability.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, Law Office of Christopher G. Hill, PCMr. Hill may be contacted at
chrisghill@constructionlawva.com
Quick Note: Not In Contract With The Owner? Serve A Notice To Owner.
August 13, 2019 —
David Adelstein - Florida Construction Legal UpdatesA subcontractor or supplier not in direct contract with an owner must serve a Notice to Owner within 45 days of initial furnishing to preserve construction lien rights. Of course, the notice of commencement should be reviewed to determine whether the subcontractor or supplier has construction lien or payment bond rights so that it knows how to best proceed in the event of nonpayment. Serving a Notice to Owner should be done as a matter of course — a standard business operation; no exceptions.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
