Seattle Washington Building Expert Directory

Recent Federal Court Decision Favors Class Action Defendants

October 26, 2020 — Amber Karns & Dan Pipitone - Construction Executive
The commercial construction contracting and subcontracting industry in general is unique under the law for industry professionals, as they’re typically limited to wage and hour litigation under provisions of the Fair Labor Standards Act. The majority of FLSA cases seek class action status or collective classification, while other FLSA litigation is initiated by individuals seeking damages. For the former, past and current employees can opt into class action litigation and seek collective damages against a construction company. The looming financial burden of class action or collective litigation against construction companies consume time, money and resources to the extent it’s often advisable for Defendants to negotiate an unfair settlement. Yet, thanks to a recent federal court decision on March 27, 2020, the legal maneuvering behind unreasonable Plaintiff demands may soon be counter-balanced by the class action Defendants’ right to due process review. A recent legal opinion in a recent FLSA case has potentially wide-ranging implications for Defendant employers mired in future class action litigation. Moreover, as the FLSA applies to all employers, this decision potentially applies to all ownership groups representing the commercial construction industry, extending to partners, contractors and subcontractors. Reprinted courtesy of Amber Karns & Dan Pipitone, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Pipitone may be contacted at dpipitone@munsch.com Ms. Karns may be contacted at akarns@munsch.com Read the court decision
Read the full story...
Reprinted courtesy of

DoD Testing New Roofing System that Saves Energy and Water

October 08, 2014 — Beverley BevenFlorez-CDJ STAFF
Builder reported that the Department of Defense (DoD) is hosting a new “dynamic roofing system, installed at the Security Forces Building at Goodfellow Air Force Base in San Angelo, Texas,” which “uses a combination of technologies that heat and cool air and water, produce electricity, and collect rainwater.” If the project is successful, it “could be replicated at thousands of DoD buildings throughout the country in the near future.” Builder described the process: “A retrofitted metal roof is installed over the existing roof, which creates a cavity between the existing and new roofs. Within that cavity insulation, solar thermal heating systems and cooling of air and water for the building can be installed. The roofing, insulation, hydronic solar thermal systems, engineered air pathways, and photovoltaic cells are designed to work symbiotically.” Read the court decision
Read the full story...
Reprinted courtesy of

The New Industrial Revolution: Rebuilding America and the World

March 04, 2019 — Drew Buechley - Construction Executive
Conventional thinking says the Industrial Revolution ended more than a century ago. Yet one crucial industry has lagged behind revolutionary changes stemming from the transition from hand production methods to the use of machines and rise of factory systems. In the 1800s, these transitions caused an influx of people to urban centers, where the majority of those changes were centered. The outcome? Not enough capital or time to build adequate housing, pushing low-income newcomers into overcrowded, unsanitary slums, resulting in increased death rates and endemic levels of contagious diseases. While other industries mechanized and surged, construction remained stagnant in comparison to demand. Fast forward to the 21st century where the U.S .benefits from a developed and industrialized world. Monumental gains in technology, combined with regulations designed to protect communities from polluted waters and disease, have drastically improved quality of life. Yet one similarity remains – the industry still struggles to build enough housing for a growing population. Urban centers have been neglected for decades while the rate of urbanization increases annually. Communities still have no access to clean drinking water and many suffer from crumbling infrastructure. Home ownership is out of reach for an entire generation, with metropolitan areas unable to keep up with demand for housing. At the very center of this lies the staid construction industry. Lagging behind the rest of the industrialized world in terms of technology advances, it has severely impacted the ability to maintain a livable nation and world. Reprinted courtesy of Drew Buechley, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

The Washington Supreme Court Rules that a Holder of a Certificate of Insurance Is Entitled to Coverage

March 09, 2020 — Sally Kim & Kyle Silk-Eglit - Gordon & Rees Insurance Coverage Law Blog
The Washington courts have historically found that the purpose of a certificate of insurance is to advise others as to the existence of insurance, but that a certificate is not the equivalent of an insurance policy. However, the Washington State Supreme Court recently held that, under certain circumstances, an insurer may be bound by the representations that its insurance agent makes in a certificate of insurance as to the additional insured (“AI”) status of a third party. Specifically, in T-Mobile USA, Inc. v. Selective Ins. Co. of America, the Supreme Court found that where an insurance agent had erroneously indicated in a certificate of insurance that an entity was an AI under a liability policy, that entity would be considered as an AI based upon the agent’s apparent authority, despite boilerplate disclaimer language contained in the certificate. T-Mobile USA, Inc. v. Selective Ins. Co. of America, Slip. Op. No. 96500-5, 2019 WL 5076647 (Wash. Oct. 10, 2019). In this case, Selective Insurance Company of America (“Selective”) issued a liability policy to a contractor who had been retained by T-Mobile Northeast (“T-Mobile NE”) to construct a cell tower. The policy conferred AI status to a third party if the insured-contractor had agreed in a written contract to add the third party as an AI to the policy. Under the terms of the subject construction contract, the contractor was required to name T-Mobile NE as an AI under the policy. T-Mobile NE was therefore properly considered as an AI because the contractor was required to provide AI coverage to T-Mobile NE under the terms of their contract. However, over the course of approximately seven years, Selective’s own insurance agent issued a series of certificates of insurance that erroneously identified a different company, “T-Mobile USA”, as an AI under the policy. This was in error because there was no contractual requirement that T-Mobile USA be added as an AI. Nonetheless, the certificates stated that T-Mobile USA was an AI, and they were signed by the agent as Selective’s “authorized representative.” Reprinted courtesy of Sally S. Kim, Gordon & Rees and Kyle J. Silk-Eglit, Gordon & Rees Ms. Kim may be contacted at sallykim@grsm.com Mr. Silk-Eglit may be contacted at ksilkeglit@grsm.com Read the court decision
Read the full story...
Reprinted courtesy of

Global Emissions From Buildings, Construction Climb to Record Levels

November 28, 2022 — Gautam Naik - Bloomberg
Carbon-dioxide emissions from building construction and operations hit an all-time high in 2021, according to the most recent data, a sign that the push to decarbonize the industry by 2050 may be slipping out of reach. Energy-related emissions from the operation of buildings reached 10 gigatonnes of CO2 equivalent, 5% higher than 2020 levels and 2% more than the pre-pandemic peak in 2019, according to data compiled by the Global Alliance for Buildings and Construction. Operational energy demand in buildings for heating, cooling, lighting and equipment rose about 4% from 2020 levels, the group said. While investments in building energy efficiency increased 16% last year to $237 billion, the growth in floor space outpaced efficiency efforts. As a result, “the gap between the climate performance of the sector and the 2050 decarbonization pathway is widening,” the report concluded. Read the court decision
Read the full story...
Reprinted courtesy of Gautam Naik, Bloomberg

3D Printing Innovations Enhance Building Safety

October 07, 2019 — Mahmut Ekenel & Melissa Sanchez - Construction Executive
The mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses. The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need. These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well. ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall. Reprinted courtesy of Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Ekenel may be contacted at mekenel@icc-es.org Ms. Sanchez may be contacted at msanchez@icc-es.org Read the court decision
Read the full story...
Reprinted courtesy of

Is the Manhattan Bank of America Tower a Green Success or Failure?

April 15, 2014 — Beverley BevenFlorez-CDJ STAFF
Construction Digital reported that the Bank of America tower in Manhattan, New York, “has been conversely hailed as both the greenest skyscraper in the world and an energy-guzzling toxic tower that exposes the charade of the LEED rating system.” It is the first skyscraper to ever achieve the highest LEED Platinum rating. However, a critic alleged that the eighty-year old Empire State Building “uses half the energy” of the new Bank of America tower. The Bank of America tower, designed by architects Cook and Fox, was built with “local and recycled materials,” as well as “floor-to-floor insulated glazing” that maximizes “natural light and traps heat, and lights are automatically dimmed in daylight.” Rainwater is captured for reuse, and “waterless urinals save an estimated 8,000,000 US gallons of water per year.” However, Construction Digital reported that Sam Roudman in New Republic Magazine “pointed out that buildings contribute more to global warming than any other sector of the economy, consuming more energy and producing more greenhouse gas emissions in America than every car, bus, jet, and train combined; and furthermore, than every factory combined.” Joel Levy writing for Construction Digital declared, “We can call LEED a failed artifice and even suggest abandoning it as a pointless charade, but unless we want to live in caves and go back to using candles for light, we must accept the fact that the 155,000,000 people that make up America’s workforce power the country and indeed the world’s economy…need somewhere to work.” Read the court decision
Read the full story...
Reprinted courtesy of

Failure to Comply with Contract Leaves No Additional Insured Coverage

January 07, 2015 — Tred R. Eyerly – Insurance Law Hawaii
Indemnity obligations and additional insured coverage were at issue in Strauss Painting, Inc. v. Mt. Hawley Ins. Co., 2014 N.Y. LEXIS 3347 (N.Y. Nov. 24, 2014). Strauss Painting, Inc. (Strauss) contracted with the Metropolitan Opera Association, Inc. (the Met) to strip and repaint the rooftop steel carriage track for the opera house's automated window-washing equipment. The contract provided that Strauss would indemnify and hold the Met harmless. Exhibit D to the contract set forth three types of insurance that Strauss was to procure: (1) workers' compensation; (2) owners and contractors protective liability (OCP); and (3) comprehensive general liability. The OCP policy was to add the Met as an additional insured. Strauss failed to obtain the OCP policy. At the time it contracted with the Met, Strauss had a CGL policy issued by Mt. Hawley. The policy's additional insured endorsement (ICO form CG 20 33 07 04) stated that "an insured" included "any organization for whom Strauss is performing operations when Strauss and such organization have agreed in writing that such organization be added as an additional insured." Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES