Understanding Lien Waivers
September 03, 2015 —
Beverley BevenFlorez-CDJ STAFFZlien on their Construction Payment Blog explained how to read a lien waiver. According to Zlien, “Lien waivers are meant to function as a sort of receipt – if a party is paid a certain amount that party waives his or her right to claim a lien for that amount. “ The blog post breaks down the types of lien waivers, including Conditional Waivers, Unconditional Waivers, Final Payment, and Progress Payment.
Once the type of waiver has been identified, Zlien suggests checking the length: “Because the party signing the lien waiver may feel obligated to sign whatever document is presented in order to get paid, unscrupulous or oblivious parties may attempt to use the lien waiver as a legal positioning tool and cram all sorts of other language into the lien waiver that really has no legitimate right or reason to be there.” Zlien recommends that if the document is long or confusing to consult an attorney.
Read the court decisionRead the full story...Reprinted courtesy of
New Proposed Regulations Expand CFIUS Jurisdiction Regarding Real Estate
January 20, 2020 —
Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law BlogOn September 17, 2019, the U.S. Department of Treasury issued two new proposed rules for the Committee on Foreign Investment in the United States (CFIUS) implementing the Foreign Investment Risk Review Modernization Act (FIRRMA). Of particular interest to readers of this blog was the second of the proposed rules, which addressed FIRRMA’s real estate-related expansion of CFIUS jurisdiction.
Pillsbury's Construction & Real Estate Law Team
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Enforceability of Contract Provisions Extending Liquidated Damages Beyond Substantial Completion
April 15, 2024 —
Stu Richeson - The Dispute ResolverThis post takes a look at the enforceability of contract provisions providing for liquidated delay damages after substantial completion. Typically, the assessment of liquidated delay damages ends at substantial completion of a project. However, various standard form contracts, including some of the ConsensusDocs and EJCDC contracts, contain elections allowing for the parties to agree on the use of liquidated damages for failing to achieve substantial completion, final completion, or project milestones. The standard language in the AIA A201 leaves it up to the parties to define the circumstances under which liquidated damages will be awarded.
Courts are split on the enforceability of provisions that seek to assess liquidated damages beyond substantial completions. Courts in some jurisdictions will not impose liquidated damages after the date of substantial completion on the ground that liquidated damages would otherwise become a penalty if assessed after the owner has put the project to its intended use. Perini Corp. v. Greate Bay Hotel & Casino, Inc., 129 N.J. 479, 610 A.2d 364 (1992). When the terms are clear, other jurisdictions will enforce contract terms providing for liquidated damages until final completion, even if the owner has taken beneficial use of the facility. Carrothers Const. Co. v. City of S. Hutchinson, 288 Kan. 743, 207 P.3d 231 (2009).
Read the court decisionRead the full story...Reprinted courtesy of
Stu Richeson, PhelpsMr. Richeson may be contacted at
stuart.richeson@phelps.com
Federal Court of Appeals Signals an End to Project Labor Agreement Requirements Linked to Development Tax Credits
October 20, 2016 —
Gregory R. Begg & Aaron C. Schlesinger – Peckar & Abramson, P.C.What Action Should Owners, Developers and Contractors Take in Anticipation of Successful Challenges to PLA Requirements?
Recently, a federal court in New Jersey issued a decision which very well may invalidate all Project Labor Agreements (“PLA’s”) entered into as a condition to receipt of tax incentives for private development. Tax incentives utilized to promote private development are different, according to the court, than typical public works projects where PLA requirements have generally been held valid. Owners, developers, contractors and governmental entities must assess the consequences of this decision upon contracts already and to be awarded in the future where tax benefits may be linked to a PLA requirement.
In 1993, in what has become known as the Boston Harbor Case, the United States Supreme Court held that state and local governmental entities may condition the award of public works contracts on the contractor’s agreement to enter into PLA’s.
That decision has been followed nationwide since then to uphold the validity of various state and local law bidding conditions requiring successful bidders to negotiate and enter into project labor agreements as a condition to the award of public works contracts. The rationale is that when the government, like any other private party, is participating in an economic market, it may exercise its discretion in setting terms and conditions it believes best suit its interests in the efficient procurement of goods and services in that market. Therefore, a PLA requirement by a governmental entity engaged in market activity is no more or less valid than a PLA requirement on a purely private project.
Reprinted courtesy of
Gregory R. Begg, Peckar & Abramson, P.C. Aaron C. Schlesinger, Peckar & Abramson, P.C.
Mr. Begg may be contacted at gbegg@pecklaw.com
Mr. Schlesinger may be contacted at aschlesinger@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Where There's Smoke...California's New Emergency Wildfire Smoke Protection Regulation And What Employers Are Required To Do
August 26, 2019 —
Michael Studenka – Newmeyer DillionCalifornia employers need to pay heed to the recently announced California Division of Occupational Safety and Health Standards Board (Cal/OSHA) emergency regulation related to their duty to protect employees from the potential harm caused by wildfire smoke. As of July 29, 2019, employers are required to actively monitor their local Air Quality Index (AQI) and take steps to protect their employees from the harmful particulate matter contained within wildfire smoke.
Which Workplaces Are Impacted?
The regulation applies to all workplaces exposed to wildfire smoke with an AQI level of 151 or greater (ranging from "unhealthy" to "hazardous"). "Exposed" workplaces are those that are not in enclosed buildings, structures, or vehicles with mechanical ventilation and the ability to close all windows and doors. Outdoor occupations including construction, agriculture, landscaping, maintenance, commercial delivery, and others that expose the worker to the outside air for more than one hour will be the most impacted by this new regulation, although firefighters engaged in fighting wildfires are expressly exempt from the statute.
What If I Have A Potentially Exposed Workplace?
Employers with outdoor workplaces that are exposed to wildfire smoke are required to monitor the AQI before each shift, and "periodically throughout the day," all to ensure that the Air Quality Index for PM2.5 (particulate matter with an aerodynamic diameter of 2.5 micrometers or smaller) remains below 151. This can be done by visiting certain governmental websites, including U.S. Environmental Protection Agency's AirNow website (www.airnow.gov), which allow for regular email alerts to be issued to the employer. An employer with a potentially exposed workplace must also set up a communication system capable of communicating to all affected employees (in a language readily understood) the status of wildfire smoke hazards. The communication system must also provide the employees a process to inform the employer of worsening air quality and/or any adverse symptoms that they may be experiencing (e.g., asthma or chest pain).
Finally, employers are required to add to their Injury and Illness Protection Program (IIPP) the provision of effective training and instruction (i.e., approximately 15 minutes) regarding:
- the health effects of wildfire smoke;
- the right to obtain medical treatment without fear of reprisal;
- how employees can obtain the current AQI for PM2.5;
- the requirements of this regulation;
- the employer's communication system regarding wildfire smoke;
- the employer's methods for protecting employees from wildfire smoke;
- the importance, limitations, and benefits of using a respirator when exposed to wildfire smoke; and
- the proper use and maintenance of respirators.
The Required Provision of Respiratory Protective Equipment
Employers with exposed workplaces are required to provide effective NIOSH-approved respirators (e.g., N95 filtering facepiece respirators) when AQI for PM2.5 levels are 151-200 (unhealthy), 201-300 (very unhealthy), or 301-500 (hazardous). The N95 respirator typically costs less than a dollar per mask and can be easily purchased online. Employers are also required to clean, store, and maintain these respirators for times of need. Employees are free to decide whether to use a respirator when the AQI for PM2.5 level is between 151-500, although employers must be prepared to offer the equipment at an AQI level of 151 or higher. Use of the respirator by an employee exposed to an AQI for PM2.5 level that exceeds 500, however, is required by law.
What Should Potentially Exposed Employers Do Now?
Employers should immediately begin supplementing their IIPP platforms to include this regulation's prescribed training regarding wildfire smoke. Companies should also develop an adequate monitoring and communication plan regarding wildfire smoke hazards and effectively train their supervisors on the same. Finally, acquiring an adequate supply of N95 filtering respirators now will help ensure that employers are prepared for the next wildfire.
Michael Studenka is a partner in Newmeyer Dillion's Labor & Employment practice group. His practice focuses on the life cycle of Employment law. Mike advises and trains companies on proactive measures to keep them protected and in compliance, and leverages his significant trial experience when faced with litigation. You can reach out to him at michael.studenka@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
Addressing Safety on the Construction Site
January 27, 2020 —
Christopher G. Hill - Construction Law MusingsFor this week’s Construction Law Musings Guest Post, we welcome a new face, Patrick Rafferty. Patrick (@ThePraff) is a consultant for Brahman Systems and has an interest in construction safety.
First of all, I’d like to say that I am not an attorney. Anything I say in this article should be taken with a grain of salt. All of the information that I have written in this article comes from personal work experience on the worksite.
Each year, construction sites around the nation see hundreds of thousands of injuries related to equipment operation and situations that could be avoidable with the right precautions in place. In 2011 alone, according to the Occupational Safety and Health Administration, there were 4,069 workers killed on a construction site, most of which were avoidable. Though some sort of on-site problems are unavoidable, they can be minimized with simple practices that every construction site should have in place, whether it is the building of a high-rise building or a simple house renovation.
Here are some of the most common issues that lead to injuries on the construction site:
Lack of training
Before anyone steps onto a construction site, they need to have a thorough understanding of not only what they will be doing, but also how to use the equipment involved in the building process. All operators of heavy machinery should have verifiable training on the machine or equipment they will operate. Most equipment dealers offer training as part of their customer service, such as usage manuals, videos and quizzes. Once these are complete, many will offer a certificate of completion at the end of the process. The larger and more complex the machine, the more time should be allotted for training.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
Haight has been named a Metropolitan Los Angeles Tier 1 “Best Law Firm” and Tier 2 for Orange County by U.S. News – Best Lawyers® “Best Law Firms” in 2023
November 21, 2022 —
Haight Brown & BonesteelHaight Brown & Bonesteel LLP is listed in the U.S. News – Best Lawyers® (2023 Edition) “Best Law Firms” list with metro rankings in the following areas:
Los Angeles
- Metropolitan Tier 1
- Insurance Law
- Product Liability Litigation – Defendants
Orange County
- Metropolitan Tier 2
- Product Liability Litigation – Defendants
Read the court decisionRead the full story...Reprinted courtesy of
Haight Brown & Bonesteel
The Miller Act: More Complex than You Think
October 07, 2016 —
Beverley BevenFlorez-CDJ STAFFKeith Bremer, senior partner of Bremer Whyte Brown & O’Meara LLP, has a feature article in the Fall 2016 issue of Construction Claims Magazine, and discusses how the Miller Act has been slowly changing: “This is a complex piece of legislation that is evolving and has been decided differently depending on the federal district a case is heard in,” Bremer wrote.
Bremer explained how the courts continue to rule differently in regards to the Miller Act. “Currently it seems jurisdictions are split on the issue of whether or not subcontractors should be allowed to bring both a federal and state cause of action stemming from payment by a Miller Act bond. Therefore, any surety writing these bonds should pay strict attention to how broad or narrow the federal district that would hear the claim has interpreted the scope of a subcontractor’s remedies for Miller Act claims.”
Read the court decisionRead the full story...Reprinted courtesy of
