Texas Considers a Quartet of Construction Bills
April 03, 2013 —
CDJ STAFFAmong the issues the Texas legislature is taking up is a measure that would require builders to buy back homes if they could not fix defects after three tries, but the law would only apply if the homeowner was a veteran. Some supporters of the bill, however, think it should be applied to all homeowners.
Additionally, the state is also considering a measure that would adopt a new definition of “construction defect” and require contractors who bought homes back to disclose all construction defects and how they were remediated. Another measure would require builders to provide construction documents, including blueprints, to buyers of new homes. A final measure would create a standardized contract for the sale of new homes.
Read the court decisionRead the full story...Reprinted courtesy of
Jury Trials and Mediation in Philadelphia County: Virtually in Person
July 27, 2020 —
Andrew F. Susko, Robert G. Devine & Daniel J. Ferhat - White and Williams LLPWhen will the trial court in Philadelphia County be open for jury trials in civil actions? While a precise prediction, given the current state of our trial courts in the middle of the COVID-19 pandemic, is difficult to make, what is known is that the use of virtual technology is likely permanently changing the landscape of civil litigation, including depositions, mediation, and other forms of alternative dispute resolution. Even civil jury trials, at least in the near term and during the pandemic, are being conducted virtually, either by private agreement, or through the courts, as is occurring in Texas and most recently in Florida with its pilot virtual trial program in five of its trial courts. While it is necessary at present for the parties to consent to a virtual trial, courts may ultimately compel the parties’ participation. Regardless, litigants and their counsel are well advised to understand the complexities and manner of a virtual trial.
Seasoned trial attorneys have long experienced and are comfortable with virtual depositions bringing distant counsel, parties and witnesses together through technology to present testimony. The use of virtual technology as a means for court arguments and hearings, mediation, and alternative dispute resolution, while novel and emerging as the new normal, is territory where a comfort level can be achieved. And while distinctions most assuredly exist, recent experience has demonstrated that court arguments, mediations and depositions can be conducted effectively remotely and virtually. Legal issues certainly do remain in the context of the deposition of parties to a civil action regarding whether a lawyer’s physical presence in the same room with a party-witness can be demanded, and whether courts would compel a virtual deposition during the COVID-19 pandemic where such physical presence of a party and their attorney could not be achieved. Undoubtedly these issues will be resolved, likely sooner than later, given the scope of the pandemic in certain areas.
Reprinted courtesy of White and Williams LLP attorneys
Andrew F. Susko,
Robert G. Devine and
Daniel J. Ferhat
Mr. Susko may be contacted at suskoa@whiteandwilliams.com
Mr. Devine may be contacted at deviner@whiteandwilliams.com
Mr. Ferhat may be contacted at ferhatd@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
Real Estate & Construction News Roundup (12/4/24) – Highest Rate of Office Conversions, Lending Caps for Fannie Mae and Freddie Mac and Affordability Challenges for Homebuyers
December 23, 2024 —
Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law BlogIn our latest roundup, infrastructure-related ballot initiatives, U.S. Green Building Council’s success stories, support for sustainable building, and more!
- 2024 is expected to see the highest rate of office conversions since CBRE began tracking them in 2016. (Nish Amarnath, SmartCities Dive)
- The Federal Housing Finance Agency has established lending caps of $73 billion each for Fannie Mae and Freddie Mac, allowing them to purchase a total of up to $146 billion in multifamily loans in 2025. (Leslie Shaver, Multifamily Dive)
- A number of infrastructure-related initiatives with the potential to impact facilities managers were on the ballot during the 2024 U.S. presidential election. (Joe Burns, Construction Dive)
Read the court decisionRead the full story...Reprinted courtesy of
Pillsbury's Construction & Real Estate Law Team
Product Liability Alert: Evidence of Apportionment of Fault Admissible in Strict Products Liability Action
March 26, 2014 —
R. Bryan Martin and Kristian B. Moriarty - Haight Brown & Bonesteel LLPIn Romine v. Johnson Controls, Inc. (No. B239761, filed March 17, 2014), the California Court of Appeal for the Second District held that a trial court must permit a defendant, in a products liability action, to present evidence of apportionment of fault among settling and non-settling entities. The case involved an automobile collision in which the plaintiff was struck from behind, causing the driver’s seat to recline and propel plaintiff into the back seat where she struck her head. Plaintiff was left quadriplegic as a result.
Plaintiff brought suit against the driver who caused the accident, the Nissan entities who manufactured the car plaintiff was driving, Johnson Controls, Inc. (“Johnson”), Ikeda Engineering Corporation (“Ikeda”), Vintec Co. (“Vintec”), and Autoliv ASP, Inc., who designed and manufactured the driver’s seat of the vehicle plaintiff was driving, and against Faurecia Automotive Seating, Inc. who manufactured the recliner mechanism of plaintiff’s vehicle’s front seat. Ikeda participated in the design of the driver’s seat and Vintec manufactured the driver’s seat. Johnson manufactured the seat belt for the driver’s seat of plaintiff’s vehicle in accordance with Nissan’s design. Prior to trial, plaintiff settled with the defendant driver, the Nissan defendants, the Autoliv defendants, and Faurecia Automotive Seating, Inc. Plaintiff elected to proceed to trial solely on a cause of action for strict products liability against Ikeda and Vintec. Pursuant to a stipulation, Johnson agreed it would be legally responsible for damages awarded to plaintiff at trial based upon the actions of Vintec or Ikeda.
At trial, the court precluded Vintec and Ikeda from offering evidence that: (1) plaintiff would not have been injured if her vehicle’s seat belt was designed in a different manner by Nissan; (2) Nissan chose the manufacturer of the recliner mechanism and required defendants to use that manufacturer and that part in the seat; and (3) The other defendants had already reached settlements with plaintiff.
Reprinted courtesy of
R. Bryan Martin, Haight Brown & Bonesteel LLP and
Kristian B. Moriarty, Haight Brown & Bonesteel LLP
Mr. Martin may be contacted at bmartin@hbblaw.com; Ms. Moriarty may be contacted at kmoriarty@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Flint Water Crisis Prompts Call for More Federal Oversight
August 28, 2018 —
Associated Press - Engineering News-RecordWASHINGTON (AP) — A federal watchdog is calling on the Environmental Protection Agency to strengthen its oversight of state drinking water systems nationally and respond more quickly to public health emergencies such as the lead-in-the water crisis in Flint, Michigan .
In a 74-page report released Thursday, the EPA's inspector general report pointed to "oversight lapses" at the federal, state and local levels in the response to Flint's contaminated drinking water.
Read the court decisionRead the full story...Reprinted courtesy of
Engineering News-RecordENR may be contacted at
ENR.com@bnpmedia.com
New NEPA Rule Restores Added Infrastructure Project Scrutiny
May 10, 2022 —
Pam McFarland - Engineering News-RecordThe White House Council on Environmental Quality has finalized a regulation that restores basic project environmental review practices that were in place prior to changes made during the Trump administration. The rule is the first of two that will have the Biden administration’s stamp on how such reviews are done under the National Environmental Policy Act (NEPA) for major federal construction projects.
Reprinted courtesy of
Pam McFarland, Engineering News-Record
Ms. McFarland may be contacted at mcfarlandp@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Create a Culture of Safety to Improve Labor Recruitment Efforts
September 12, 2022 —
Grant Robbins - Construction ExecutiveThe commercial construction industry must rely on skilled labor to survive. Skilled labor, however, is hard to come by. In fact, many construction firms report projects being delayed because of shortages in the workforce.
Part of the problem is training. Few companies have the time, resources or opportunities to train new construction workers. But the biggest reason for the labor shortage in the construction industry is simply a lack of people joining the trades. Decades ago, construction was a respected career choice. Over the years, however, the pressure to get into a four-year college has created negative perceptions of working in the trades.
Some commercial construction companies choose to work with fewer crews as a result of the lack of skilled labor, therefore limiting the number of jobs they can handle. The labor shortage in the construction industry has simply made it nearly impossible to find subcontractors to adequately staff upcoming projects (one survey found that 35% of contractors had to turn down jobs due to a lack of skilled laborers). This then leads to hikes in construction costs and delays in scheduling, which can take a major toll on business.
Reprinted courtesy of
Grant Robbins, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Tall Mass Timber Buildings Now Possible Under 2021 IBC Code Changes
February 03, 2020 —
Kenneth Bland - Construction ExecutiveThe International Code Council (ICC) has approved 17 changes to the 2021 editions of the International Building Code (IBC) and International Fire Code, allowing for mass timber buildings up to 18 stories. With the addition of three new mass timber construction types (Type IV-A, IV-B, and IV-C), this is the first time in the history of the modern building code that significantly new construction types have been added to the code.
Building Materials
The primary building material that makes tall mass timber (TMT) buildings possible is cross-laminated timber (CLT). CLT is manufactured from dimension lumber (nominal 2x lumber) laid side-by-side or mass plywood panels of a specified width. Laminations of lumber are typically laid perpendicular to each other to form panels of various thicknesses that are bonded together using heat resistant adhesives that cure in large hydraulic presses. CLT commonly consists of an odd number of laminations.
These solid wood panels can be anywhere from 6 inches to 20 inches nominal thickness and 60 feet long. Typical CLT panels will be 6 inches to 14 inches nominal thickness. The panels are fabricated off site, transported onto the construction site and assembled in a manner that is efficient and remarkably fast. CLT panels can be used as floor, wall, or roof building elements supported by glued-laminated beams and columns.
Reprinted courtesy of
Kenneth Bland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of