SEATTLE WASHINGTON BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Architecture, Robotics, and the Importance of Human Interaction – An Interview with Prof. Kathrin Dörfler

September 21, 2020 — Aarni Heiskanen - AEC Business
We sat down with Professor Kathrin Dörfler of the Technical University of Munich (TUM) in advance of WDBE 2020. We discussed the importance of innovation and how her research focuses on the need for practical and productive solutions when it comes to on-site support. Digital and technical innovation plays an essential role in optimizing the modern built environment. Now leading the Augmented Fabrication Lab (AFAB) in TUM, Professor Kathrin Dörfler quickly saw the need for practical solutions early in her career. The Importance of ‘Need’ “I’m originally an architect,” she says. “I studied digital art and architecture and my tendency to go toward digital fabrication came from this proximity to computational design and the need to use robots for fabrication. There was no other way to build the things you created in your virtual space without using machinery.” Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

Occurrence-Based Insurance Policies and Claims-Made Insurance Policies – There’s a Crucial Difference

April 13, 2017 — Garret Murai – California Construction Law Blog
I’ve yet to find reading through an insurance policy on anyone’s “bucket list.” But read them you should. Or have your attorney read through them (wink, wink). Because when you need to tender a claim there’s probably no more important document in the world. In Tidwell Enterprises, Inc. v. Financial Pacific Insurance Company, Inc., Case No. C078665 (November 29, 2016), a client whose attorney did read the policy, bested the insurer of a policy it issued. Tidwell Enterprises, Inc. In 2006 or 2007, Tidwell Enterprises, Inc. installed a fireplace at a single-family home located in Copperopolis, California. At the time, Tidwell had a general commercial liability policy issued by Financial Pacific Insurance Company, Inc. which expired in March 2010. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

---

Chambers USA 2019 Ranks White and Williams as a Leading Law Firm

June 03, 2019 — David Marion, Patricia Santelle & Maulin Vidwans - White and Williams LLP
Chambers USA once again recognized White and Williams as a leading law firm in Pennsylvania for achievements and client service in the area of insurance law. In addition, three lawyers received individual honors - one for her work in insurance, one for his work in commercial litigation and another for his work in banking and finance. White and Williams is acknowledged for its renowned practice offering expert representation to insurers and reinsurers across an impressive range of areas including coverage, bad faith litigation and excess liability. The firm is recognized for its notable strength in transactional and regulatory matters complemented by its adroit handling of complex alternative dispute resolutions. Chambers also acknowledged the firm's broad trial capabilities, including handling data privacy, professional liability and toxic tort coverage claims, and experience in substantial claims arising from bodily injury and wrongful death suits. White and Williams' individual lawyer honorees include Managing Partner Patti Santelle, who is named an Eminent Practitioner in the area of insurance. Patti's considerable experience advising insurers on a broad range of coverage matters, including asbestos, environmental and toxic tort cases, coupled with her proficiency in coverage actions at the state and federal level earn her a well-regarded reputation as an "excellent lawyer." Reprinted courtesy of White and Williams LLP attorneys David Marion, Patricia Santelle and Maulin Vidwans Mr. Marion may be contacted at mariond@whiteandwilliams.com Ms. Santelle may be contacted at santellep@whiteandwilliams.com Mr. Vidwans may be contacted at vidwansm@whiteandwilliams.com Read the court decision
Read the full story...
Reprinted courtesy of

---

Home Construction Slows in Las Vegas

November 27, 2013 — CDJ STAFF
Although home builders in the Las Vegas area are doing better than they were in 2012, growth is still slow and October saw a decline in the sale of new homes. However, as with other areas, the average home price actually increased over prior months, despite the cooling off the actual number of sales. Taken as a whole though, 2013 looks a lot better than 2012, with 44% more homes sold this year. Dennis Smith, the president of Home Builders Research said that 2013 “will be remembered as ‘the year of recovery,’” but added that “there is still a long path ahead for everyone to feel a sense of comfort.” Read the court decision
Read the full story...
Reprinted courtesy of

---

Does a No-Damage-for-Delay Clause Also Preclude Acceleration Damages?

January 27, 2020 — Ted R. Gropman & Christine Z. Fan - ConsensusDocs
Construction contracts often include a “no damage for delay” clause that denies a contractor the right to recover delay-related costs and limits the contractor’s remedy to an extension of time for noncontractor-caused delays to a project’s completion date. Depending on the nature of the delay and the jurisdiction where the project is located, the contractual prohibition against delay damages may well be enforceable. This article will explore whether an enforceable no-damage-for-delay clause is also a bar to recovery of “acceleration” damages, i.e., the costs incurred by the contractor in its attempt to overcome delays to the project’s completion date. Courts are split as to whether damages for a contractor’s “acceleration” efforts are distinguishable from “delay” damages such that they may be recovered under an enforceable no-damage-for-delay clause. See, e.g., Siefford v. Hous. Auth. of Humboldt, 223 N.W.2d 816 (Neb. 1974) (disallowing the recovery of acceleration damages under a no-damage-for-delay clause); but see Watson Elec. Constr. Co. v. Winston-Salem, 109 N.C. App. 194 (1993) (allowing the recovery of acceleration damages despite a no-damage-for-delay clause). The scope and effect of a no-damage-for-delay clause depend on the specific laws of the jurisdiction and the factual circumstances involved. There are a few ways for a contractor to circumvent an enforceable no-damage-for-delay clause to recover acceleration damages. First, the contractor may invoke one of the state’s enumerated exceptions to the enforceability of the clause. It is helpful to keep in mind that most jurisdictions strictly construe a no-damage-for-delay clause to limit its application. This means that, regardless of delay or acceleration, courts will nonetheless permit the contractor to recover damages if the delay is, for example, of a kind not contemplated by the parties, due to an unreasonable delay, or a result of the owner’s fraud, bad faith, gross negligence, active interference or abandonment of the contract. See Tricon Kent Co. v. Lafarge N. Am., Inc., 186 P.3d 155, 160 (Colo. App. 2008); United States Steel Corp. v. Mo. P. R. Co., 668 F.2d 435, 438 (8th Cir. 1982); Peter Kiewit Sons’ Co. v. Iowa S. Utils. Co., 355 F. Supp. 376, 396 (S.D. Iowa 1973). Reprinted courtesy of Ted R. Gropman, Pepper Hamilton LLP and Christine Z. Fan, Pepper Hamilton LLP Mr. Gropman may be contacted at gropmant@pepperlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

---

KONE is Shaking Up the Industry with BIM

January 20, 2020 — Aarni Heiskanen - AEC Business
KONE supplies elevators, escalators, autowalks and maintenance and modernization solutions. I sat down with Kenneth Flannigan to discuss how BIM is changing KONE and what it means to the industry. KONE operates in over 60 countries, has around 1.3 million units in service, and moves over one billion people per day. The company’s mission is “to improve the flow of urban life.” Kenneth Flannigan is the BIM Solution Owner for the company. He acknowledges that even though KONE provides equipment and software innovation, in this day and age that’s not enough. “We’re a critical path item. How innovative are we if we’re not working on every single project in a shared 3D environment, like our customers?” Flannigan asks. KONE serves both indirect and paying customers. It works with influencers like architects and with general contractors, builders, and construction managers. It also has a life-cycle relationship with building owners, which is evidenced by the fact that over 30% of the company’s sales come from maintenance. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

Will Superusers Future-Proof the AEC Industry?

May 13, 2019 — Aarni Heiskanen - AEC Business
Design professionals who leverage tools and technology and, at the same time, have people skills, are essential to the future of the industry. They are Superusers, the protagonists of the latest book by Randy Deutsch. Randy Deutsch is an architect, educator, workshop leader, writer, and international keynote speaker. I had a chance to interview him about his book, Superusers: Design Technology Specialists and the Future of Practice. First, I was curious to know why he chose this topic for his fourth book. He explains: “Right now, it made a lot of sense to focus on the individual, not focus on collaboration and building teams, and really define what each individual team member should be.” Who Are Superusers? IT, technology, and tool specialists are typically experts in a relatively narrow field. Designers, especially architects, must have a wider perspective. Superusers are design technologists; liaisons between business needs and technology solutions. They demonstrate certain skillsets and mindsets. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

Governmental Immunity Waived for Independent Contractor - Lopez v. City of Grand Junction

September 17, 2018 — Frank Ingham - Colorado Construction Litigation Blog
On July 12, 2018, the Colorado Court of Appeals announced its decision in Lopez v. City of Grand Junction, 2018 WL 3384674 (Colo. App. 2018). The Court considered whether immunity is waived under Colorado’s Governmental Immunity Act (“CGIA”), pursuant to section C.R.S. § 24-10-106(1)(f), in situations where the public entity hired an independent contractor to perform the work. The Court held that if the public entity would have been liable under the CGIA for the conduct that caused the injury, had it performed the work itself, then it is liable for the work performed by its independent contractor. Read the court decision
Read the full story...
Reprinted courtesy of Frank Ingham, Higgins Hopkins McClain & Roswell, LLC
Mr. Ingham may be contacted at ingham@hhmrlaw.com

---