Seattle Washington Building Expert Directory

High Court Could Alter Point-Source Discharge Definition in Taking Clean-Water Case

March 18, 2019 — Mary B. Powers - Engineering News-Record
The U.S. Supreme Court's decision to review lower court rulings on whether a permit is required under the federal Clean Water Act when pollutants originate from a point source but are carried to navigable waters by a non-point source such as groundwater could set some new parameters for compliance, observers say. Read the court decision
Read the full story...
Reprinted courtesy of Mary B. Powers, ENR
ENR may be contacted at ENR.com@bnpmedia.com

Did the Court of Appeals Just Raise the Bar for California Contractors to Self-Report Construction-Related Judgments?

June 10, 2015 — Garret Murai – California Construction Law Blog
An interesting construction case just came out from the California Court of Appeals for the Second District this past month – Pacific Caisson & Shoring, Inc. v. Bernards Bros., Inc., California Court of Appeals for the Second District, Case No. B248320 (May 19, 2015) – which discusses a number of intertwining issues that can be faced by contractors in California and concludes with a result that I’m not sure I quite agree with. Among the issues discussed by the Court of Appeal were:

The application of the dreaded Business and Professions Code section 7031 which: (1) precludes a contractor from making a claim for payment for work performed; and (2) requires a contractor to disgorge all monies received for work performed, if the contractor was not properly licensed at all times that work was performed;
The impact of an unsatisfied judgment against one contractor on the license of another “related” contractor; and
Whether a stipulated judgment providing for payments over time is an unsatisfied final judgment under the Licensing Law.

Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Coverage, Bad Faith Upheld In Construction Defect Case

October 26, 2017 — Tred R. Eyerly - Insurance Law Hawaii
The California Court of Appeal affirmed the trial court's finding of coverage for faulty workmanship allegations and bad faith by the insurer. Pulte Home Corp. v. Am Safety Indem. Co., 2017 Cal. App. LEXIS 748 (Cal. Ct. App. Aug. 30, 2017). Pulte Home Corporation was the general contractor and developer of two residential projects. American Safety issued several sequential comprehensive general liability policies to three of Pulte's subcontractors which named Pulte as an additional insured. The projects were completed by 2006. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly - Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

General Partner Is Not Additional Insured For Construction Defect Claim

August 26, 2015 — Tred R. Eyerly – Insurance Law Hawaii
The court determined that the project owner's general partner was not an additional insured entitled to a defense and indemnity against claims for construction defects. St. Paul Fire & Marine Ins. Co. v,. Cypress Fairway Condo. Ass'n, 2015 U.S. Dist. LEXIS 94012 (M.D. Fla. July 20, 2015). Construction of the Cypress Fairway Condominium project took place in 1999 and 2000. Cypress Fairway Ltd. ("Cypress") was the owner and Vineland Partners , LLC ("Vineland") was its general partner. The general contractor was Winter Park Construction Company ("WPC"). Water intrusion and property damage occurred, but it was unclear when or whether the damage was known. Cypress' expert indicated that the damage began shortly after the end of construction. In 2004, the complex was sold to Cypress Madison Ownership Company. In 2010, the Cypress Fairway Condominium Association sued Cypress and Vineland. Count V of the underlying complaint asserted there were construction defects that Cypress and Vineland were responsible for when they owned and managed the project. Count VI alleged that Cypress and Vineland negligently supplied information which the Association relied on for the purchase of the condominiums. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

10 Safety Tips for General Contractors

October 09, 2018 — Eric Weisbrot – JW Surety Bonds
The construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job. 1 – Know the Risks The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees. 2 – Require Protective Gear An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks. 3 – Educate on Ladder Safety According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder. 4 – Recognize Equipment Pitfalls Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks. 5 – Document Potential Hazards A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses. 6 – Maintain Equipment and Tools Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job. 7 – Minimize Crowds Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity. 8 – Hire Licensed Subcontractors General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with licensing requirements as mandated by the state or city. 9 – Focus on Training Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job. 10 – Be Present Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person. Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog. Read the court decision
Read the full story...
Reprinted courtesy of

Dispute Waged Over Design of San Francisco Subway Job

July 30, 2019 — Erica Berardi - Engineering News-Record
Contractor Tutor Perini Corp. is clashing with the San Francisco Municipal Transportation Agency over what the firm says are alleged design flaws that may push past December the completion of the already-delayed $1.6-billion Central Subway Project. Read the court decision
Read the full story...
Reprinted courtesy of Erica Berardi, ENR
Ms. Berardi may be contacted at BerardiE@enr.com

Where Did That Punch List Term Come From Anyway?

March 27, 2019 — Duane Craig - Construction Informer
I’ve often wondered just where the term “punch list” came from, and I’ve found a few sources that seem to make sense, while others not so much. One person claims it came from the telephone installer process of “punching down” terminals on a block. That seems a bit of a stretch though. A blog writer said it had to do with the term ‘punch’ since it means to “punch something up” as in fix it. Another blog writer thought it had something to do with a long forgotten practice. Apparently subcontractors used to each have their own hole punches that would punch a hole with a shape unique to them. They would use these punches to indicate they had corrected the deficiency that was their responsibility. Read the court decision
Read the full story...
Reprinted courtesy of Duane Craig, Construction Informer

Climate Disasters Are an Affordable Housing Problem

October 01, 2024 — Juan Pablo Garnham & Arjuna Heim - Bloomberg
When Maui was devastated by wildfires in August 2023, some residents were initially fortunate. The neighborhood of Makawao, for example, was spared the worst effects of the fire that engulfed Lahaina, 35 miles to the west. Recently, though, we met a woman in that neighborhood who faces a different kind of threat: Her landlord has now demanded that she pay double her rent or face eviction. As housing advocates in the region, we’ve heard stories like this repeatedly, as residents report an acute fear of displacement and homelessness. A year after the fires killed more than 100 people, displaced 12,000 and disrupted the economy of the island, the disaster lingers for many in Maui and Hawai'i. Rents across the island have increased sharply, offering a cautionary tale for the rest of the US about how climate change, a housing crisis and the lack of adequate public policies can multiply the suffering of a community already in pain. Read the court decision
Read the full story...
Reprinted courtesy of Bloomberg

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES