Allegations That COVID-19 Was Physically Present and Altered Property are Sufficient to Sustain COVID-19 Business Interruption Suit
May 24, 2021 —
Michael S. Levine & Joseph T. Niczky - Hunton Insurance Recovery BlogOn Wednesday, a federal judge in Texas denied Factory Mutual’s Rule 12(c) motion for judgment on the pleadings, finding that the plaintiffs adequately alleged that the presence of COVID-19 on their property caused covered physical loss or damage in the case of Cinemark Holdings, Inc. v. Factory Mutual Insurance Co., No. 4:21-CV-00011 (E.D. Tex. May 5, 2021). This is the third COVID-19-related business interruption decision from Judge Amos Mazzant since March, but the first in favor of a policyholder. Taken together, the three decisions have two key takeaways and provide a roadmap for policyholders in all jurisdictions.
First, the Cinemark decision recognizes that the alleged presence of COVID-19 viral particles that physically altered the policyholder’s property is sufficient under federal pleading standards and controlling state law. In its motion, FM relied on Judge Mazzant’s recent decision in Selery Fulfillment, Inc. v. Colony Insurance Co., No. 4:20-CV-853, 2021 WL 963742 (E.D. Tex. Mar. 15, 2021), which dismissed a lawsuit alleging that the policyholder’s losses were caused by government orders that closed its business, rather than from the actual presence of the virus on its property. The Court held that government orders alone do not constitute physical loss or damage, and declined to rule on whether the physical presence of the virus does. Judge Mazzant reached the same conclusion weeks later in Aggie Investments, L.L.C. v. Continental Casualty Co., No. 4:21-CV-0013, 2021 WL 1550479 (E.D. Tex. Apr. 20, 2021).
Reprinted courtesy of
Michael S. Levine, Hunton Andrews Kurth and
Joseph T. Niczky, Hunton Andrews Kurth
Mr. Levine may be contacted at mlevine@HuntonAK.com
Mr. Niczky may be contacted at jniczky@HuntonAK.com
Read the court decisionRead the full story...Reprinted courtesy of
Real Estate & Construction News Roundup (09/06/23) – Nonprofit Helping Marginalized Groups, Life Sciences Taking over Office Space, and Housing Affordability Hits New Low
October 24, 2023 —
Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law BlogIn our latest roundup, Walmart adds their own generative AI, major airlines reduce their capacity at regional airports, autoworkers prepare for a strike as negotiations continue, and more!
Read the court decisionRead the full story...Reprinted courtesy of
Pillsbury's Construction & Real Estate Law Team
General Liability Alert: ADA Requirements Pertaining to Wall Space Adjacent to Interior Doors Clarified
February 26, 2015 —
Lawrence S. Zucker II and Kristian B. Moriarty – Haight Brown & Bonesteel LLPIn Kohler v. Bed Bath & Beyond (No. 12-56727, filed February 19, 2015) the United States Court of Appeals for the Ninth Circuit affirmed a grant of summary judgment in favor of a department store related to the necessary moving clearance for an interior restroom door pursuant to the Americans With Disabilities Act ("ADA").
Plaintiff, Chris Kohler, is paraplegic and requires the use of a wheelchair to move in public. On two separate days in May 2011, Kohler used the restroom inside the Bed Bath & Beyond store in Riverside, California. Of relevance to the appeal, Kohler contends there was less than ten inches of strike-side wall space on the pull side of Bed Bath & Beyond’s restroom door which allegedly made it difficult for Mr. Kohler to pull open the restroom door by pushing off the strike-side wall with one hand while pulling the door handle with the other. He also contends there was less than three inches of strike-side wall or floor space on the push side of the door, making it difficult for Kohler to open the door from the push side. The door at issue did not have a latch which would stop the door from freely swinging on a hinge.
Reprinted courtesy of
Lawrence S. Zucker II, Haight Brown & Bonesteel LLP and
Kristian B. Moriarty, Haight Brown & Bonesteel LLP
Mr. Zucker may be contacted at lzucker@hbblaw.com
Mr. Moriarty may be contacted at kmoriarty@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Congratulations to BWB&O’s Newport Beach Team for Prevailing on a Highly Contested Motion to Quash!
January 08, 2024 —
Dolores Montoya - Bremer Whyte Brown & O'Meara LLPCongratulations to Newport Partners Tyler Offenhauser and Jonathan Cothran, and Associate Anisha Kohli, who recently prevailed on behalf of BWB&O’s client before the Orange County Superior Court on a highly contested Motion to Quash Service based on Plaintiff’s failure to timely file and serve a DOE Amendment, naming our client.
BWB&O’s client was the owner of a building where Plaintiff, a licensed electrician, was electrocuted while performing an upgrade to the building’s electrical infrastructure. Plaintiff’s original lawsuit named only the building’s tenant, who was also represented by BWB&O. BWB&O was successful earlier this year on a Motion for Summary Judgment under the Privette Doctrine and won judgment on behalf of the client/tenant. While that MSJ was pending, Plaintiff surreptitiously added the building’s owner to the suit with a DOE Amendment, after several months earlier learning the owner and then tenant were entities operated by the same individual. However, Plaintiff never informed counsel or any other party of the filing. Moreover, after the MSJ was granted, Plaintiff then waited several more months to serve the building’s owner.
Read the court decisionRead the full story...Reprinted courtesy of
Dolores Montoya, Bremer Whyte Brown & O'Meara LLP
Corps Issues Draft EIS for Controversial Alaskan Copper Mine
March 27, 2019 —
Pam Radtke Russell - Engineering News-RecordA proposed copper and gold mine in Alaska could impact up to 12,000 acres of wetlands as well as local fisheries but would help meet a worldwide demand for copper, according to the draft environmental impact statement on the Pebble Mine in the Bristol Bay area of Alaska.
Read the court decisionRead the full story...Reprinted courtesy of
Pam Radtke Russell, ENRMs. Russell may be contacted at
Russellp@bnpmedia.com
7 Areas where Technology is Shifting the Construction Business
November 21, 2018 —
Eric Weisbrot – JW Surety BondsThe digital transformation of the last two decades has taken hold of the business environment in a powerful way. Companies in nearly all sectors are experiencing a significant shift in the way business is done, with a heavy focus on improved productivity, increase profitability, and enhanced product and service offerings. The construction industry has been historically slow to update its processes and business models in-line with other industries, but technology is currently making its long-awaited appearance in the sector. Construction professionals can embrace these new solutions to run more efficient businesses and keep a closer eye on profitability by reducing
common costs over time.
These are the seven major areas where technology is changing construction.
1 - Business Management
One of the most apparent shifts taking place in the construction industry thanks to technology is the advancement of business processes and systems behind the scenes. Construction managers and job site owners have countless
digital tools at their fingertips to help with managing all aspects of the business. This includes more efficient ways to manage material use and equipment inventory, logging subcontractor hours and pay, and maintaining reporting requirements from regulatory perspectives. Many software solutions integrate with older, legacy systems, making this change an easy one for construction businesses across the board.
2 – Jobsite Productivity
Another area of transformation in construction is productivity on each job site. Technology has offered job owners and general contractors more efficient methods to keep track of project timelines as well as subcontractor progress from start to finish. The technology advancements in this arena come in the form of wearable devices that track work performed, as well as mobile devices that help keep the often mundane tasks necessary for a project’s success up to date and completed on time.
3 – Worker Safety
Although wearables are being utilized in several different ways in the construction business, these devices are making a significant difference in the safety of workers. From smart helmets to digitally enhanced eyewear, workers are alerted to potential hazards on the job that they otherwise could not identify. Similarly, augmented and virtual reality solutions are being used to train workers before they arrive at a job, preparing them for safety concerns well in advance. Even though most licensed and
bonded construction workers have appropriate training throughout their careers, the addition of these resources has the ability to further reduce the risks often associated with construction work.
4 – Surveying and Monitoring
Unmanned aerial vehicles, also known as
drones, are being used throughout construction. These digital tools are equipped with cameras to offer a bird’s eye view of a construction site to help with surveying and identifying potential hazards for workers. Drones also help with inspections throughout a project’s progression, offering some reduction in cost and improving efficiencies.
5 – Improved Materials
Technology is also playing a role in the materials used on job sites. The addition of 3D printing has proven beneficial for construction companies, as concrete composites, plastics, and other materials are being printed and used to create structures on-site. This offers a more cost-effective and accurate way to complete a project.
6 – Self-operating Equipment
Some technology firms are making waves in the construction industry because they are currently developing and implementing
autonomous equipment solutions. Heavy machinery, like excavators, bricklayers, and bulldozers, are already being used on construction sites to help ease the burden of the labor shortage in the industry. While these machines are not yet mainstream, the benefits they offer mean they are likely to become a staple in construction in the years to come.
7 – Big Data
Finally, technology is shifting the construction business by way of big data analytics. With the detailed information from new software solutions, wearable tech, and drones, construction site managers have more data than they have ever had. This influx of information offers a way to analyze job site progress, budgets, timelines, and efficiency for companies large and small.
Author:
Eric Weisbrot is the Chief Marketing Officer of
JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
COVID-19 Could Impact Contractor Performance Bonds
March 30, 2020 —
Ben Williams & MG Surety - Construction ExecutiveAs COVID-19 continues to expand around the United States and the world, it may only be a matter of time before U.S. construction projects are affected by the virus. Performance bonds guarantee that a project will be completed by a contractor according to the contract. However, what if a contractor cannot complete a project on time due to widespread disease? What, if any, impact could the virus have on a contractor’s surety bond program?
Risk Factors
Several risks associated with the virus could trigger a performance bond claim.
1. Materials. The Chinese account for a large supply of construction materials, including steel, copper, cabinetry, etc. An inability to obtain these materials could significantly delay or stop a project all together. Even if a contractor is able to obtain them from other sources, it may be at a significantly higher cost than they put into the bid.
2. Labor. There is already a shortage of qualified labor in the construction industry. Additionally, construction already lends itself to the spreading of viruses; workers are often in close proximity, handling common materials, and they may not have an easily accessible place to wash their hands. Furthermore, even though many now have paid sick leave, there is often pressure not to use it. These things could magnify the labor shortage and make it difficult to complete projects on time.
3. Safety. Finally, the world is having a serious shortage of respirators. Because of widespread panic, many people have been purchasing N95 respirators—so much that the Surgeon General has asked people to stop buying them. It has created a shortage for people who really need them, like contractors. If contractors can’t get these safety masks, certain trades will either be unable to work, or risk continuing the project without masks, which would endanger workers and open them up to OSHA penalties.
Reprinted courtesy of
Ben Williams and MG Surety, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Williams may be contacted at
benw@mgsuretybonds.com
Home Prices on the Rise
September 03, 2015 —
Beverley BevenFlorez-CDJ STAFFAccording to CoreLogic, in July, housing prices rose 6.9% compared to last year, reported Housing Wire. Furthermore, prices increased by 1.7% compared to June 2015.
“Home sales continued their brisk rebound in July and home prices reflected that, up 6.9% from a year ago,” Frank Nothaft, chief economist for CoreLogic, told Housing Wire. “Over the same period, the National Association of Realtors reported existing sales up 10% and the Census Bureau reported new home sales up 26% in July.”
Read the court decisionRead the full story...Reprinted courtesy of
