The NAR asks FAA to Amend their Drone Rules for Real Estate Use
September 24, 2014 —
Beverley BevenFlorez-CDJ STAFFHousing Wire reported that the National Association of Realtors (NAR) “is pushing for an exception for Realtors in the current rules on Unmanned Aerial Vehicle (UAV) technology since their motives don’t disrupt safety concerns, according to a letter sent on Tuesday to the FAA.”
According to Housing Wire, the NAR believes that real estate professionals would benefit from UAV technology, more commonly referred to as drones, in a variety of ways, “including, law enforcement, environmental scanning, geographical surveys and disaster recovery assessments.”
The NAR stated, as quoted in Housing Wire, “Use of UAV technology by the real estate industry is simple compared to other applications such as land surveying or law enforcement. The use of UAV technology would be limited in scope to the property itself. Properly written regulation would permit the use of UAV technology within the real estate industry, while maintaining safety in the NAS and privacy of citizens.”
Read the court decisionRead the full story...Reprinted courtesy of
Beyond the Disneyland Resort: Special Events
May 03, 2018 —
Beverley BevenFlorez-CDJ STAFFWant to exchange your mouse ears for a baseball cap? The
Los Angeles Angels of Anaheim are home May 13th through the 20th. See the Angels play Houston on the 16th or Tampa Bay on the 17th or 18th.
The
House of Blues of Anaheim has moved out of Downtown Disney. Concerts you may want to attend there include VHS Collection on 5/16 at 7pm, Party Like It’s 1999! A Prince Tribute Party at 7pm on 5/18 or Life of Agony also at 5/18 at 7pm. If you’re still in town on Saturday, 5/19, you can check out School of Rock Tustin at 10am.
Soulfly & Nile will be playing at the
City National Grove of Anaheim on Friday, 5/18 at 6:30pm.
Read the court decisionRead the full story...Reprinted courtesy of
ASCE Statement on Senate Passage Of Infrastructure Investment and Jobs Act
August 16, 2021 —
Jean-Louis Briaud, President, American Society of Civil Engineers (ASCE)WASHINGTON, DC. –
The American Society of Civil Engineers (ASCE) applauds the U.S. Senate for passing the bipartisan Infrastructure Investment and Jobs Act (IIJA), proving once again that the strength and reliability of our nation's infrastructure systems is an issue that unites us all.
With this legislation, the federal government will restore their critical partnership with cities and states to modernize our nation's infrastructure, including transit systems, drinking water pipes, school facilities, broadband, ports, airports and more.
We commend the Senate for prioritizing American communities by passing this bipartisan infrastructure legislation and urge the U.S. House of Representatives to do the same.
ABOUT THE AMERICAN SOCIETY OF CIVIL ENGINEERS
Founded in 1852, the American Society of Civil Engineers represents more than 150,000 civil engineers worldwide and is America's oldest national engineering society. ASCE works to raise awareness of the need to maintain and modernize the nation's infrastructure using sustainable and resilient practices, advocates for increasing and optimizing investment in infrastructure, and improve engineering knowledge and competency. For more information, visit www.asce.org or www.infrastructurereportcard.org and follow us on Twitter, @ASCETweets and @ASCEGovRel.
Read the court decisionRead the full story...Reprinted courtesy of
Former Trump Atlantic City Casino Set for February Implosion
December 29, 2020 —
Stephanie Loder - Engineering News-RecordThe 39-story main tower of the former Trump Plaza hotel-casino on the Atlantic City, N.J., boardwalk, sold to investor Carl Icahn in 2016, will be imploded in February by a Philadelphia general contractor already in the process of dismantling the former showplace of President Donald Trump's real estate holdings.
Reprinted courtesy of
Stephanie Loder, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story...
Read the court decisionRead the full story...Reprinted courtesy of
Policy Lanuage Expressly Prohibits Replacement of Undamaged Material to Match Damaged Material
March 09, 2020 —
Tred R. Eyerly - Insurance Law HawaiiConstruing an all-risk Businessowners Policy, the court found that the policy language did not required replacement of undamaged material match materials that were damaged. Pleasure Creek Townhomes Homeowners' Ass'n v. Am. Family Ins. Co., 2019 Minn. App. Unpub. LEXIS 1095 (Minn. Ct. App. Nov. 25, 2019).
The policy covered the Association's 14 townhome buildings. In June 2017, a hail storm damaged siding on all 14 buildings. An appraisal panel included the cost to replace the undamaged, faded siding in its appraisal award so that it would match the new siding. American Family refused to pay this component - which was appraised at about $211,382 - of the award.
An exclusion in the policy provided,
We will not pay to repair or replace undamaged material due to mismatch between undamaged material and new material used to repair or replace damaged material.
We do not cover the loss in value to an property due to mismatch between undamaged material and new material used to repair or replace damaged material.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
Read Before You Sign: Claim Waivers in Project Documents
July 06, 2020 —
William E. Underwood - ConsensusDocsNot all claim waivers are appropriately titled “Waiver of Claims.” In fact, claim waivers can be found “hiding” without any advertisement or fanfare in a number of project documents, including change orders and applications for payment. So although getting work quickly approved and paid for is important, taking time to read the specific language in your project documents is just as important. Failure to pay close attention to this language could result in the waiver of key, unresolved project claims.
Further, and although it should go without saying, it is also just as important to read all of the terms of your contract. Important waiver language might not exist on the face of form project documents, but rather might be contained in the general and/or supplemental conditions of your contract and automatically incorporated into your form project documents. And these types of incorporated waivers can be just as enforceable.
So it is critically important to understand what you are signing and the implications it might have on future claims. This article will explore some of the common types of claim waivers that can be found in project documents so that you are better positioned to avoid inadvertently waiving claims in the future.
Read the court decisionRead the full story...Reprinted courtesy of
William E. Underwood, Jones Walker LLPMr. Underwood may be contacted at
wunderwood@joneswalker.com
Building a Case: Document Management for Construction Litigation
October 07, 2019 —
Robert A. Gallagher, Jane Fox Lehman, & Michael I. Frankel, Pepper Hamilton LLP - ConsensusDocsSuccess in construction litigation often turns less on counsel’s ability to craft legal arguments and more on counsel’s ability to gather, master and present the often complex set of facts underlying the case. In construction matters, most of the key facts are found in documents: contract documents, drawings, plans and specifications, schedules, submittals, progress reports, daily logs, change orders, invoices and payment records. Nowadays, these documents will almost certainly be created, exchanged and stored electronically; many will never exist in hard copy. As such, timely collection, organization and analysis of electronically stored information (ESI) is crucially important in construction litigation.
The construction industry has always involved a large quantity of records. Today, the majority of those records exist only as ESI: Design professionals use computer-aided design (CAD) software to create construction plans. Construction managers use Primavera or similar software to create schedules and workflows. Estimators use job cost control programs. Innovative firms capture digital photos of the project, from mobilization through the punch process.
Because ESI is created and exchanged at a higher rate than hard-copy documents, ESI has facilitated a dramatic increase in the volume of records associated with construction projects. Further compounding the increase is the proliferation of mobile devices. With a smartphone in every pocket, ESI creation has moved out of the home office and the site trailer and onto the site itself. As the volume of ESI expands, so too does the time and expense associated with storing, processing, reviewing and producing these records. This article will cover strategies for balancing time and expense with the requirements of the rules and the needs of the case.
Reprinted courtesy of Pepper Hamilton LLP attorneys
Robert A. Gallagher,
Jane Fox Lehman and
Michael I. Frankel
Mr. Gallagher may be contacted at gallagherr@pepperlaw.com
Ms. Lehman may be contacted at lehmanj@pepperlaw.com
Mr. Frankel may be contacted at frankelm@pepperlaw.com
Read the court decisionRead the full story...Reprinted courtesy of
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
