Fairfield Connecticut Building Expert Directory

The Regulations on the Trump Administration's Chopping Block

August 02, 2017 — Pam Radtke Russell - Engineering News-Record
The Trump administration's next big step toward repealing the controversial Waters of the U.S. (WOTUS) rule is official, with a proposal to rescind the Obama-era regulation appearing in the Federal Register on July 27, setting off a relatively short comment period that will end Aug. 28. Read the court decision
Read the full story...
Reprinted courtesy of Pam Radtke Russell, ENR
Mr. Russell may be contacted at Russellp@bnpmedia.com

Part II: Key Provisions of School Facility Construction & Design Contracts

July 21, 2018 — David R. Cook - Autry, Hall & Cook, LLP
In Part I of this article, published in late April, we discussed the performance risk and time risk involved with construction and design contracts, and in Part II, we will cover cost risk and political risk. Cost Risk School budgets are limited for many reasons, and the construction budget is no exception. As a result, contracts should guard against unwarranted cost increases and claims. In the absence of a written change order signed by the appropriate officer, the contract should absolutely prohibit additional compensation for changes in the work. It should forbid claims for all events except those within the school authority’s sole control. Even for permitted claims, the contractor must provide written notice so that the authority might alleviate the problem and control its costs. To encourage the contractor to limit costs and claims, the contract could include a shared-savings clause, which grants an incentive payment for completion within the budget. Read the court decision
Read the full story...
Reprinted courtesy of David R. Cook, Autry, Hall & Cook, LLP
Mr. Cook may be contacted at cook@ahclaw.com

The Construction Lawyer as Counselor

June 10, 2019 — Christopher G. Hill - Construction Law Musings
It’s been a while since I discussed the role that I believe a construction lawyer should serve. Back in 2013, I discussed how those of us that practice construction law are seen as “necessary evils.” I was thinking over the weekend about certain clients and matters (as I often do, particularly in the shower) and came to the conclusion that the best role for me as a Virginia construction attorney is that of counselor and sounding board for my clients. Sure I come from a litigation background, enjoy working with other construction lawyers here in the Commonwealth, and often the first contact that I have with clients is when there is a problem, but I enjoy my practice, and I believe clients are more satisfied with their interactions with me when I try and provide a more cost effective and pragmatic solution than that which litigation or arbitration provides. The six years of solo construction practice since 2013 (yes, I’m close to the 9 year mark with my practice) has only served to cement the fact that construction professionals need and want the “counselor” portion of “attorney and counselor at law.” Working as a sort of “in house counsel” to various construction companies, as opposed to simply dealing with the litigation, allows me to better understand their businesses and assist them in avoiding problems through contract review, discussions of situations that come up short of claims, and general risk management. I also get to know these mostly small business owners on a more personal level (sometimes even resulting in a fishing trip or two). Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Real Estate & Construction News Roundup (7/10/24) – Strong Construction Investment in Data Centers, Increase Use of Proptech in Hospitality and Effects of Remote-Work on Housing Market

August 05, 2024 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law Blog
In our latest roundup, renters stay in their units longer, GenAI change how commercial real estate operates, and banks continue high exposure due to commercial real estate.

Strong investor interest, particularly in opportunistic and value-add segments, signals a strong market for construction firms specializing in high-yield projects. (Sebastian Obando, Construction Dive)
A growing number of renters are staying in their units for longer periods of time than they did a decade ago with over one-third of U.S. renters have lived in the same apartment for more than five years. (Mary Salmonsen, Multifamily Dive)
Several U.S. regional and mid-sized banks continue to face the squeeze from high exposure to the commercial real estate sector that has been shaken by higher-for-longer interest rates and empty office buildings. (Reuters)

Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team

BIM Legal Liabilities: Not That Different

February 10, 2020 — Christopher G. Hill - Construction Law Musings
For this week’s Guest Post Friday here at Musings, we welcome Scott P. Fitzsimmons. Scott is an attorney with the construction law firm Watt, Tieder, Hoffar & Fitzgerald, where he represents contractors, subcontractors, owners, and engineers. He is also a LEED AP and an instructor for AGC of D.C., where he teaches BIM Contract Negotiation and Risk Allocation as part of AGC’s Certificate of Management, Building Information Modeling program. When a new technology is introduced to the construction industry, contractors inevitably ask themselves one question “Great, how can this new gadget get me into trouble?” Building Information Modeling (BIM) is exactly the kind of technology that raises this fear. But, BIM has been around for a few years now, and the construction industry has done a good job of curtailing the fear of unanticipated legal liability. Nevertheless, contractors should be aware of the pitfalls BIM introduces and should know how to limit their risk arising from this new “gadget.” Often described as “CAD on Steroids,” BIM is truly much more than a simple design program. Along with early clash detection, BIM provides time and cost integration; calculates energy efficiency; and assists building maintenance long after project completion. Unlike CAD, BIM also modifies the collaborative nature of a construction project. Thus, subcontractors no longer review a design, submit shop drawings, and go to work. Rather, subcontractors are brought into the design process early in the project and often are asked to contribute to the design long before construction begins. Asking a contractor or subcontractor to provide design services appears to shift the roles of an architect and a contractor. So, the questions abound: Is a contractor now responsible for design? Can the contractor be held responsible for defective design? Do not fret. To date, there has been only one advertised case addressing BIM liability. The reason is simple. For almost a hundred years, the United States Supreme Court has held that contractors are not responsible for defective design on a traditional design-bid-build project. Using BIM, therefore, should not modify a contractor’s responsibility. But, to ensure that your obligations do not extend beyond construction, all BIM requirements should be in writing and made part of your contract. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Project-Specific Commercial General Liability Insurance

May 13, 2019 — Jeremiah M. Welch - Saxe Doernberger & Vita, P.C.
Many markets which provide insurance for construction projects include an endorsement providing coverage for “repair work” as part of their standard policy. “Repair work” endorsements are largely misunderstood by policyholders and the insurance broker community. They are typically assumed to be coverage enhancements, but many provide no additional coverage and actually risk reduction of coverage otherwise provided as part of the products-completed operations (“PCO”) extensions also found in these project-specific policies. This article is designed to help the reader understand these endorsements so that better decisions can be made at the point of purchase. Intent The common feature of these endorsements is a grant of coverage for bodily injury and property damage resulting from “repair work” for a specified period of time. Most endorsements define “repair work” to mean the repair of completed work performed pursuant to a contract or warranty. Read the court decision
Read the full story...
Reprinted courtesy of Jeremiah M. Welch, Saxe Doernberger & Vita, P.C.
Mr. Welch may be contacted at jmw@sdvlaw.com

Cincinnati Goes Green

May 10, 2013 — CDJ STAFF
Columbus Dispatch reports that under a program in Cincinnati, homeowners can receive tax breaks that eliminate their property taxes for up to fifteen years. As a result, while about 100 single-family homes in Cincinnati are LEED-certified, Columbus can claim only one. The rest of the state also lags behind, with only eighteen percent of LEED-certified homes outside Cincinnati. Jim Weiker reports that energy efficiency is at the top of homebuyers’ wants, even beating out granite countertops. But although green certification seems to support a four percent increase in price, builders aren’t rushing to follow LEED standards. Read the court decision
Read the full story...
Reprinted courtesy of

Colorado Finally Corrects Thirty-Year Old Flaw in Construction Defect Statute of Repose

March 29, 2017 — Jesse Howard Witt - The Witt Law Firm
The Colorado Supreme Court has finally settled a decades-old conundrum surrounding the state’s construction defect statute of repose. A statute of repose is similar to a statute of limitations insofar as both restrict the time a party can bring a claim. A statute of repose period begins on a fixed date (such as the day someone finishes work on a project), while a statute of limitations period begins when someone discovers an injury (such as a defectively installed window). In 1986, at the height of the so-called “tort reform” movement, the Colorado General Assembly voted to shorten both the statute of repose and the statute of limitations for construction defect claims. Historically, Colorado’s statute of repose had given a homeowner ten years following construction to file an action, and its statute of limitations had required that any such action be filed within three years of the date that the claimant discovered a defect. After 1986, however, these time periods changed; the new statute of repose required suits to be filed within six years of the end of construction, and the new statute of limitations gave claimants only two years following discovery of the physical manifestation of a defect to seek legal relief.[1] Reprinted courtesy of Jesse Howard Witt, Acerbic Witt Mr. Witt may be contacted at www.witt.law Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES