Cleveland Condo Board Says Construction Defects Caused Leaks
March 01, 2012 —
CDJ STAFFA Cleveland condo association has sued the developer of their building, claiming that construction defects resulted in water intrusion. The K&D Group, which still owns forty units in the 160-unit building, claim that it’s a maintenance issue that they’d like to see fixed, but it’s their responsibility as the developer. Doug Price, CEO of K&D calls it a “frivolous lawsuit.” He blames a “hostile board” and told The Plain Dealer “there’s simple maintenance that they refuse to do.”
An outside company evaluated Stonebridge Towers. According to the condo board’s lawyer, Laura Hauser, the building design and construction are to blame for the water intrusion. Hauser said that the board’s “goal through this litigation is to find a resolution for the association, the building and the owners.”
David Kaman, a Cleveland attorney not involved in the lawsuit, told the Plain Dealer that construction litigation in the Cleveland area had fallen off from 2007, but he sees it on the rise, which he attributes to cost-cutting on recently finished projects. “If an owner moves in and two years later the wallpaper needs to be replaced because the wall is leaking, that’s a construction defect.”
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Evaluating Smart Home Technology: It’s About More Than the Bottom Line
May 03, 2021 —
James W. McPhillips & Rachel Newell - Gravel2Gavel Construction & Real Estate Law BlogOutfitting a commercial real estate space with smart technology can be a significant cost. While the long-term benefits and strategic improvements we’ve discussed previously can make that investment worthwhile, the evaluation period is critical to ensure an impactful ROI. Property developers, owners, and managers should undertake a rigorous evaluation process to ensure the technology procurement aligns with the project’s overall financial plan. And this is not just about getting the cost right. If the technology does not meet the needs of the space, then all the smart technology in the world will not prevent the project from being a sunk cost.
Do the Research so You Know …
The Technology. While the RFP is a key step of the procurement process, a more informal research phase should be undertaken first. Smart technology is a rapidly evolving field, and before reaching out to vendors, the business should ensure that it understands what is available—both in terms of the kinds of technology that can be implemented, and the various companies that offer solutions. Gathering this information early will yield results that align more closely with a particular building’s needs.
Reprinted courtesy of
James W. McPhillips, Pillsbury and
Rachel Newell, Pillsbury
Mr. McPhillips may be contacted at james.mcphillips@pillsburylaw.com
Ms. Newell may be contacted at rachel.newell@pillsburylaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds
September 05, 2022 —
Adam J. Weaver & Lindsey Mitchell - Gravel2Gavel Construction & Real Estate Law BlogThe 3D printing construction market is likely on the cusp of a boom.
This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years.
While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials.
Reprinted courtesy of
Adam J. Weaver, Pillsbury and
Lindsey Mitchell, Pillsbury
Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Port Authority Revises Plans for $10B Midtown NYC Bus Terminal Replacement
March 04, 2024 —
Marigo Farr - Engineering News-RecordNew York City's Midtown Manhattan bus terminal replacement project advanced last week after the Port Authority of New York and New Jersey released a draft environmental impact statement and a revised project plan based on feedback from commuters, residents and local officials.
Reprinted courtesy of
Marigo Farr, Engineering News-Record
ENR may be contacted at enr@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Breaking The Ice: A Policyholder's Guide to Insurance Coverage for Texas Winter Storm Uri Claims
August 30, 2021 —
Kelly A. Johnson - Saxe Doernberger & Vita, P.C.The devastating extreme cold weather event in Texas often referred to as Winter Storm Uri, which lasted from February 14 to February 18, 2021, caused significant damages to homes and businesses in the region. Temperatures during the winter storm were the coldest on record since 1883, with some areas reaching as low as negative 6 degrees.4 Millions of Texans were impacted and many lives were lost.
Insurance analysts predict that Uri will lead to the largest number of insurance claims in the state, totaling $20 billion in claimed losses.5 In fact, Uri is set to surpass Hurricane Harvey as the most devastating natural disaster in Texas, which resulted in $19 billion in insured losses. Further, Uri will be the largest insured loss from a United States winter storm in the industry’s history.6
The catastrophic Uri losses range from damage to property caused by the bursting of frozen pipes, collapsed roofs, weakened structures, loss of power, lack of public utility services, and the expenses incurred in the disruption of normal business operations. In addition, some commercial businesses were unable to operate due to bad weather conditions on the roads, while others were forced to halt operations due to power outages.
Read the court decisionRead the full story...Reprinted courtesy of
Kelly A. Johnson, Saxe Doernberger & Vita, P.C.Ms. Johnson may be contacted at
KJohnson@sdvlaw.com
"Your Work" Exclusion Bars Coverage for Contractor's Faulty Workmanship
December 02, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe West Virginia Supreme Court of Appeals found there was no coverage for the contractor's faulty workmanship in constructing a home. State of W. Virginia ex rel. Nationwide Mut. Ins. Co. v. The Honorable Ronald E. Wilson, 2015 W. Va. LEXIS 963 (W. Va. Oct. 7, 2015).
In July 2009, Fred Hlad contracted to build a home for the Nelsons and complete construction by November 2009. The Nelsons sued when the house was not timely completed. Nationwide defended under a reservation of rights, but then filed a declaratory judgment action.The circuit court denied Nationwide's request for declaratory relief, determining that the defective workmanship was an "occurrence." Nationwide petitioned the Supreme Court for a writ of prohibition.
On appeal, Nationwide argued that eight of the nine counts in the Nelsons' complaint were not caused by his defective workmanship. These allegations included breach of contract claims and intentional torts. Nationwide submitted it was not obligated to indemnify Hlad for damages that may be recovered on those counts. The court agreed that Nationwide's duty to indemnify was limited only to those claims that triggered coverage. Accordingly, Nationwide had no duty to indemnify for the eight counts alleging breach of contract and intentional torts.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Cold Weather Causes Power Blackouts, Disruptions on Jobsites
February 22, 2021 —
Autumn Cafiero Giusti - Engineering News-RecordA February cold snap in the central U.S. has created record power demand, resulting in outages from Texas to North Dakota and contractors bracing for delays and damage from weather impacts.
Reprinted courtesy of
Autumn Cafiero Giusti, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Limiting Services Can Lead to Increased Liability
December 16, 2019 —
Christopher G. Hill - Construction Law MusingsFor this week’s Guest Post Friday Musings, we welcome Nick Pacella. Nick is an architect licensed in New York, New Jersey and Connecticut. His practice has spanned several economic swings and he has been able to reposition the eggs in his basket to make the most of each recovery. He is currently focusing on adapting existing commercial buildings to take advantage of materials and processes that promote improved energy efficiency for both the owner and the tenants. For a more colorful rendition of projects you can visit his company’s website.
I remember as a kid when the attendant at gas stations would not only clean your windows but also check the oil level of your vehicle as it was filling up with $0.25 per gallon gas. (I did say that I have seen several economic swings) These services have mostly disappeared, and to no great effect to your car since most cars go much longer between oil changes. Other than a slightly dirtier windshield it hasn’t affected your ability to drive and maintain your car.
This is not so with professional services. Architects used to include many services that are now sourced to others. Project Management, Owner’s Representatives and Program Managers now populate the landscape. In many cases they came to be because architects either did not provide the service their client’s were looking for or they allowed themselves to be put into an adversarial relationship with their clients. They were likened to foxes watching the chicken coop, especially for project management and owners representative services. Client’s have had others buzzing in their ears “are architects really going to look out for my interests above theirs?’” Of course the clients never ask if the new wave will do any better at rallying behind their interests.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com