Seattle Washington Building Expert Directory

If I Released My California Mechanics Lien, Can I File a New Mechanics Lien on the Same Project? Will the New Mechanics Lien be Enforceable?

December 29, 2020 — William L. Porter - Porter Law Group
If I Released My California Mechanics Lien, Can I File a New Mechanics Lien on the Same Project? Will the New Mechanics Lien be Enforceable? In general, the answer to the above questions is “Yes”, but only if you meet the following requirements:

You must only release the mechanics lien itself, but not the “right” to a mechanics lien: There is an important distinction to be made between releasing a mechanics lien and releasing the right to a mechanics lien. Whether you do one or the other will depend on the specific language used in your release. In the case of Santa Clara Land Title Co. v. Nowack and Associates, Inc. (1991) 226 Cal. App.3d, 1558 a “release of mechanics lien” document was recorded TO THE County Recorder’s office which included a statement that the mechanics lien was “fully satisfied, released and discharged”. Based on this language, the court concluded that the mechanics lien claimant had waived its “right” to a further mechanics lien on the same property for the work in question. The court concluded that since the release stated that the claim was “fully satisfied” the right to mechanics lien on the project had forever been waived. The Nowak case can be distinguished from the case of Koudmani v. Ogle Enterprises, Inc., (1996) 47 Cal.App.4th 1650, where the release of mechanics lien only stated that the mechanics lien was “otherwise released and discharged” and not that it was “satisfied”. Based on the distinction drawn from the two cases, a simple mechanics lien release that only releases the mechanics lien itself, but not the “right” to a mechanics lien should be used. At the following link you will find a proper form to achieve this purpose: https://www.porterlaw.com/wp-content/uploads/2019/06/03PRI-Mechanics-Lien-Release.pdf

Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

Insurance Law Client Alert: California Appeals Court Refuses to Apply Professional Services Exclusion to Products-Completed Operations Loss

March 19, 2014 — Valerie A. Moore and Chris Kendrick - Haight Brown & Bonesteel LLP
In North Counties Engineering v. State Farm (No. A133713, filed 3/13/14), State Farm insured an engineering company under CGL insurance that had a professional services exclusion and included products-completed operations (PCO) coverage. The owner of the engineering company, NCE, contracted with a winery to construct a dam and associated works. Also on the project was the owner's son, who had his own construction company, NCD. There were multiple contracts, both oral and written, variously naming one company or the other. The evidence later showed that the father performed hands-on work for the project. After completion, the winery was sued over sediment and erosion caused by the dam. State Farm denied coverage on the ground that the professional services exclusion applied, as well as a mistaken belief that the policy had no PCO coverage. State Farm then changed its position and agreed to defend, but only going forward. The insured sued State Farm over past defense fees, alleging breach of contract and bad faith. The case went to trial and after testimony detailing State Farm's claim handling, the trial judge granted a nonsuit, finding that the professional services exclusion barred all coverage: "[I]f you look at the pleadings, the legal pleadings and the contracts, the NCE role is, as the engineering company, the support company, and that company was overseeing the [sic] NCD to make sure that whatever they did was done right.... NCE is the expert on the job, the professional providing professional services, design and construction, and also overseeing the work of NCD, the son’s business, which is doing more of the physical activity.... That takes professional expertise and I think all of what Mr. Akerstrom did was professional.... It was this professional work, and not 'something incidental to their professional involvement' that gave rise to the underlying actions. In this situation, it’s not a malpractice or E and O policy. It’s a business policy, which has good benefits, but is subject to the professional services exclusion." Reprinted courtesy of Valerie A. Moore and Chris Kendrick of Haight Brown & Bonesteel LLP Ms. Moore may be contacted at vmoore@hbblaw.com; Mr. Kendrick may be contacted at ckendrick@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Insurers Subrogating in Arkansas Must Expend Energy to Prove That Their Insureds Have Been Made Whole

August 06, 2019 — Michael J. Ciamaichelo - The Subrogation Strategist
Arkansas employs the “made whole” doctrine, which requires an insured to be fully compensated for damages (i.e., to be “made whole”) before the insurer is entitled to recover in subrogation.[1] As the Riley court established, an insurer cannot unilaterally determine that its insured has been made whole (in order to establish a right of subrogation). Rather, in Arkansas, an insurer must establish that the insured has been made whole in one of two ways. First, the insurer and insured can reach an agreement that the insured has been made whole. Second, if the insurer and insured disagree on the issue, the insurer can ask a court to make a legal determination that the insured has been made whole.[2] If an insured has been made whole, the insurer is the real party in interest and must file the subrogation action in its own name.[3] However, when both the insured and an insurer have claims against the same tortfeasor (i.e., when there are both uninsured damages and subrogation damages), the insured is the real party in interest.[4] In EMC Ins. Cos. v. Entergy Ark., Inc., 2019 U.S. App. LEXIS 14251 (8th Cir. May 14, 2019), EMC Insurance Companies (EMC) filed a subrogation action in the District Court for the Western District of Arkansas alleging that its insureds’ home was damaged by a fire caused by an electric company’s equipment. EMC never obtained an agreement from the insureds or a judicial determination that its insureds had been made whole. In addition, EMC did not allege in the complaint that its insureds had been made whole and did not present any evidence or testimony at trial that its insureds had been made whole. After EMC presented its case-in-chief, the District Court ruled that EMC lacked standing to pursue its subrogation claim because “EMC failed to obtain a legal determination that its insureds had been made whole . . . prior to initiating this subrogation action.” Thus, the District Court granted Entergy Ark., Inc.’s motion for judgment as a matter of law and EMC appealed the decision. Read the court decision
Read the full story...
Reprinted courtesy of Michael J. Ciamaichelo, White and Williams LLP
Mr. Ciamaichelo may be contacted at ciamaichelom@whiteandwilliams.com

Quick Note: Independent Third-Party Spoliation Of Evidence Claim

June 18, 2019 — David Adelstein - Florida Construction Legal Updates
In an earlier posting I discussed the difference between first-party spoliation of evidence and third-party spoliation of evidence. There is NO independent cause of action for first-party spoliation of evidence because that can be dealt with directly in the underlying lawsuit. This deals with the assertion that an actual party to a lawsuit spoiled evidence. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

HP Unveils Cheaper, 3-D Printing System to Spur Sales

November 05, 2014 — Jack Clark - Bloomberg
Hewlett-Packard Co. (HPQ) unveiled a new 3-D-capable computer and speedier 3-D printer technology as it prepares to spin off its personal-computer and printer businesses into a stand-alone company. The company today introduced Sprout, an $1,899 computer that lets people scan and manipulate 2-D and 3-D objects. It will be available early next month online and in some U.S. stores. Hewlett-Packard also said new 3-D printer technology will make the process cheaper and faster than competitors. The Palo Alto, California-based company is betting that 3-D technology will help revitalize sales and spur growth in the printer industry. More than 2.3 million 3-D printers will ship in 2018, up from about 108000 this year, according to researcher Gartner Inc. Earlier this month, Hewlett-Packard said it would split into two companies by late 2015, with one focused on corporate hardware services and the other -- dubbed HP Inc. -- on PCs and printers. Read the court decision
Read the full story...
Reprinted courtesy of Jack Clark, Bloomberg
Mr. Clark may be contacted at jclark185@bloomberg.net

Economic Loss Not Property Damage

November 04, 2019 — Tred R. Eyerly - Insurance Law Hawaii
The Fifth Circuit agreed with the district court that the insured subcontractor's economic losses did not amount to covered property damage. Greenwich Ins. Co. v. Capsco Industries, Inc., 2019 U.S. App. LEXIS 23949 (5th Cir. Aug 12, 2019). Capsco Industries, Inc. was a subcontractor on the construction of a casino. Capsco subcontracted with Ground Control to install water, sewage, and storm-drain lines. Ground Control was terminated from the project by the general contractor for alleged safety violations and failed drug tests of its employees. Ground Control sued in state court against multiple parties, including Capsco, seeking payment for work on the project. The claims were dismissed on summary judgment because neither party had obtained the required certificates of responsibility from the state, making the parties' contract void. The Mississippi Supreme Court agreed the contract was void, but reversed and remanded for further proceedings based solely on theories of unjust enrichment and quantum meruit. While the state case was on remand, Capsco's liability insurers, Greenwich Insurance Company and Indian Harbor Insurance Company, filed a compliant for declaratory judgment in federal district court seeking a declaration that they did not owe a defense or indemnity to Capsco. The defendants were Ground Control, Capsco, the general contractor, and the casino owner. The latter two parties were dismissed. Ground Control counterclaimed for coverage of its claims against Capsco. The district court stayed proceedings until the state court litigation ended. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Preventing Costly Litigation Through Your Construction Contract

August 17, 2011 — Douglas Reiser, Builders Council Blog

It’s Tuesday, which means it ’s the middle of your work week. Tuesday is a great time to take an hour to look over your contracts, while the crews are pushing through their scheduled work. Today’s food for thought: How do you use your contract to reduce your litigation burden?

Your contract should do many things. It should discuss the scope of work, scheduling of work, quality of work, coverage for liabilities and conditions and timeliness for payment. But often overlooked is how your contract can lend to dispute resolution.

Commonly, you will see a simple provision that covers governing law, venue for disputes and the awarding of attorneys’ fees. But you can do better. Remember, a contract is enforced to the maximum extent possible in Washington state.

Read the full story…

Reprinted courtesy of Douglas Reiser of Reiser Legal LLC. Mr. Reiser can be contacted at info@reiserlegal.com

Read the court decision
Read the full story...
Reprinted courtesy of

Force Majeure Recommendations

August 15, 2022 — Denise Motta - Gordon & Rees Construction Law Blog
This Bulletin provides guidance to contractors, subcontractors, suppliers, and others to ensure compliance with contractual change order requirements in the event work on a construction project is impacted by a force majeure event. Contract Protection Tips: A force majeure event is defined as an unforeseeable circumstance that prevents someone from fulfilling a contract. Because many events arising on a construction project could be arguably unforeseen, it is imperative that the contract contain a Force Majeure provision. Examine all contracts for the applicable Force Majeure provision. Look for a clause like this:

§ 8.3.3 Any failure or omission by Owner or Contractor in performance of its obligation shall not be deemed a breach or create any liability for damages or other relief (other than additional time) if it arises from any cause beyond the reasonable control of such party, including, without limitation, acts of God, floods, fire, explosions, storms, earthquakes, acts of public enemy, war, terrorism, rebellion, insurrection, riot, sabotage, invasion, epidemic, quarantine, strikes, lockouts, labor disputes or other industrial disturbances, or any order or action by any governmental agency, or causes of similar nature.

Read the court decision
Read the full story...
Reprinted courtesy of Denise Motta, Gordon Rees Scully Mansukhani, LLP
Ms. Motta may be contacted at dmotta@grsm.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES