Fairfield Connecticut Building Expert Directory

White and Williams recognized with Multiple Honorees in the Chambers 2023 USA Guide

June 26, 2023 — White and Williams LLP
Chambers has released their 2023 USA guide and ranked White and Williams as a leader among national law firms. The firm was recognized for recent achievements in Real Estate Finance and Insurance in Pennsylvania, and Construction in Maryland. “We are very pleased to have some of our most talented attorneys recognized again by Chambers”, said Andrew Susko, the Firm’s Managing Partner. In addition, to practice area recognition, nine lawyers were recognized and ranked highly in the 2023 Chambers USA guide from Connecticut, Pennsylvania, and Maryland. In Philadelphia, Timothy E. Davis, Partner and Chair of the Business Department, and Nancy Sabol Frantz, Chair of the Real Estate and Finance practice were recognized for their achievements in Real Estate: Finance; and, Stephen Coury, Connecticut Office Managing Partner, was ranked among the top Real Estate professionals in Connecticut. Read the court decision
Read the full story...
Reprinted courtesy of White and Williams LLP

Tall Mass Timber Buildings Now Possible Under 2021 IBC Code Changes

February 03, 2020 — Kenneth Bland - Construction Executive
The International Code Council (ICC) has approved 17 changes to the 2021 editions of the International Building Code (IBC) and International Fire Code, allowing for mass timber buildings up to 18 stories. With the addition of three new mass timber construction types (Type IV-A, IV-B, and IV-C), this is the first time in the history of the modern building code that significantly new construction types have been added to the code. Building Materials The primary building material that makes tall mass timber (TMT) buildings possible is cross-laminated timber (CLT). CLT is manufactured from dimension lumber (nominal 2x lumber) laid side-by-side or mass plywood panels of a specified width. Laminations of lumber are typically laid perpendicular to each other to form panels of various thicknesses that are bonded together using heat resistant adhesives that cure in large hydraulic presses. CLT commonly consists of an odd number of laminations. These solid wood panels can be anywhere from 6 inches to 20 inches nominal thickness and 60 feet long. Typical CLT panels will be 6 inches to 14 inches nominal thickness. The panels are fabricated off site, transported onto the construction site and assembled in a manner that is efficient and remarkably fast. CLT panels can be used as floor, wall, or roof building elements supported by glued-laminated beams and columns. Reprinted courtesy of Kenneth Bland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Construction Defects Claims Can Be Limited by Contract Says Washington Court

February 11, 2013 — CDJ STAFF
The firm Lane Powell has issued a construction law update on the recent Washington Supreme Court decision in Washington State Major League Baseball Public Facility District v. The Baseball Club of Seattle, LP. In the underlying construction defect claim, the Public Facility District found defects in the structural steel at Seattle’s Safeco Field. The contractor, Huber, Hunt & Nichols-Kiewit Construction Company claimed that construction claims could not be made, as it was barred by the statue of repose. Washington State has a six-year limitation on its statute of repose, however, the court noted that the contract contained a clause that, as noted by Lane Powell, “any alleged causes of action automatically accrue at substantial contemplation,” instead of within six years of substantial completion. The court concluded that the statue of repose could be rendered inoperative by contract. Further, the court found that these contract clauses pertained to subcontractors as well. Nevertheless, as PFD is a subdivision of the state, the court found that no statue of limitations could be appled. Read the court decision
Read the full story...
Reprinted courtesy of

Kiewit Hired as EPC for Fire-Damaged Freeport Gas Terminal Fix

September 19, 2022 — Mary B. Powers - Engineering News-Record
Freeport LNG’s $13.5-billion natural gas liquefaction plant and export terminal in Texas, closed since a June 8 fire and explosion that damaged the facility, said it will not partially reopen until possibly mid-November, and not fully operate until next March—the third delay it has announced. Reprinted courtesy of Mary B. Powers, Engineering News-Record ENR may be contacted at enr@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Effective Allocation of Damages for Federal Contract Claims

October 25, 2021 — Dirk D. Haire, Joseph L. Cohen & Jane Han - ConsensusDocs
Federal construction contracts law generally recognizes four basic methods for pricing damages: (1) Actual Cost Method (ACM); (2) Total Cost Method (TCM); (3) Modified Total Cost Method (MTCM); and (4) Jury Verdict Recovery Method (JVRM). In practice, it is difficult to obtain significant recoveries on TCM and JVRM claims, and only marginally easier on MTCM claims. That is because the courts and boards that hear federal government contracts cases have developed a clear preference for the ACM. Despite this preference, many contractors do not have systems in place to maximize their opportunity to recover damages under the ACM. This article introduces various strategies for tracking and allocating damages during project performance in a manner that will support an ACM analysis if a federal construction claim is litigated. Background: Four Basic Methods for Pricing Damages The four methods for pricing damages are described, below: 1. Actual Cost Method The actual cost method claims damages based on records of “actual costs” that were documented during the performance of the contract. All additional costs must be separately recorded from the costs incurred in the normal course of contract performance. Because contractors provide the court or board with documented underlying expenses under the actual cost method, courts and boards prefer this method. However, the actual cost method may not always be feasible where a contractor is confronted with drastic changes early and often in a project. Reprinted courtesy of Dirk D. Haire, Fox Rothschild LLP, Joseph L. Cohen, Fox Rothschild LLP and Jane Han, Fox Rothschild LLP Mr. Haire may be contacted at dhaire@foxrothschild.com Mr. Cohen may be contacted at jlcohen@foxrothschild.com Read the court decision
Read the full story...
Reprinted courtesy of

Louisiana Court Applies Manifestation Trigger to Affirm Denial of Coverage

June 10, 2015 — Tred R. Eyerly – Insurance Law Hawaii
Applying the manifestation trigger, the Louisiana Court of Appeal affirmed denial of coverage where the property damage manifested after the policy period expired. Landry v. Williamson, 2015 La. App. Unpub. LEXIS 213 (La. Ct. App. May 1, 2015). On August 28, 2002, the Burkarts purchased a home from the Williamsons. One month later, water started leaking into the home during periods of rainfall. Suit was filed against the contractor, who was insured by Scottsdale. Scottsdale, who was added as a defendant, filed a motion for summary judgment, asserting that it did not insure the developer at the time the alleged property damage occurred. Scottsdale's policy expired on August 1, 2002. The trial court granted Scottsdale's motion, finding coverage under its policy was not triggered because no property damage occurred during the policy period. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Big Policyholder Win in Michigan

January 05, 2017 — Jeremiah M. Welch – Saxe Doernberger & Vita, P.C.
Jeremiah Welch and Michael Barrese recently had a big win in front of the Michigan Court of Appeals. The case (Skanska-Schweitzer v. Farm Bureau General Insurance Company of Michigan) involved Skanska’s claim for defense and indemnity from Farm Bureau Ins. Co. of Michigan for an injury to an elementary school student arising out of the removal of playground equipment by a landscaping company, Horrocks. Farm Bureau denied coverage because it claimed that the work was not part of Horrocks’ contract with the project owner and therefore Skanska, the construction manager, did not qualify as an additional insured on the policy. SDV argued that the AI endorsement did not specify that Horrocks’ work be performed as part of its contract with the owner; it only required that the work be performed “for Skanska.” Read the court decision
Read the full story...
Reprinted courtesy of Jeremiah M. Welch, Saxe Doernberger & Vita, P.C.
Mr. Welch may be contacted at jmw@sdvlaw.com

Viewpoint: Firms Should Begin to Analyze Lessons Learned in 2020

January 04, 2021 — Rich Friedman - Engineering News-Record
If there’s one phrase that describes 2020, it was not “business as usual.” How AEC firms fared last year depended upon their strategies for navigating an uncertain landscape. While we talk about finding a new normal, company leaders in 2021 will have to think more expansively about what they want that “normal” to look like. Reprinted courtesy of Rich Friedman, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES