Seattle Washington Building Expert Directory

Pennsylvania Considers Changes to Construction Code Review

November 06, 2013 — CDJ STAFF
Pennsylvania may soon change how it adopts changes to its implementation of the Uniform Construction Code, but it’s not clear which method will be adopted, as the Pennsylvania House and Senate have competing bills. In the Senate bill (SB1023), the only change would be that any changes to the Uniform Building Code made by the International Code Council would automatically become part of the Pennsylvania building code, unless rejected by a two-thirds vote of the Pennsylvania UCC Review and Advisory Council. Under current Pennsylvania law, changes are adopted only with a two-thirds approval of the RAC. The House bill (HB1209), separates the commercial code from the residential code. Under the House proposal, the RAC would reject changes to the commercial building code on a two-thirds vote, otherwise they would be adopted, but in the residential building code, changes would be rejected unless the RAC approved them by a two-thirds vote. Read the court decision
Read the full story...
Reprinted courtesy of

How the New Dropped Object Standard Is Changing Jobsite Safety

January 02, 2019 — Derek Rose - Construction Executive
In the United States, a dropped object injures a worker every 11 minutes—equating to nearly 50,000 cases every year. For those who seek medical treatment for these types of injuries, it can cost an average of $42,000. In fact, 5 percent of all fatalities on jobsites are due to falling objects, according to the Bureau of Labor Statistics. These statistics highlight the overwhelming importance of dropped object prevention. OSHA already identifies dropped object incidents under the category of “Struck by Object” in its widely recognized “Fatal Four” list of the four leading causes of fatalities in the construction industry. Reprinted courtesy of Derek Rose, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

BIM Legal Liabilities: Not That Different

February 10, 2020 — Christopher G. Hill - Construction Law Musings
For this week’s Guest Post Friday here at Musings, we welcome Scott P. Fitzsimmons. Scott is an attorney with the construction law firm Watt, Tieder, Hoffar & Fitzgerald, where he represents contractors, subcontractors, owners, and engineers. He is also a LEED AP and an instructor for AGC of D.C., where he teaches BIM Contract Negotiation and Risk Allocation as part of AGC’s Certificate of Management, Building Information Modeling program. When a new technology is introduced to the construction industry, contractors inevitably ask themselves one question “Great, how can this new gadget get me into trouble?” Building Information Modeling (BIM) is exactly the kind of technology that raises this fear. But, BIM has been around for a few years now, and the construction industry has done a good job of curtailing the fear of unanticipated legal liability. Nevertheless, contractors should be aware of the pitfalls BIM introduces and should know how to limit their risk arising from this new “gadget.” Often described as “CAD on Steroids,” BIM is truly much more than a simple design program. Along with early clash detection, BIM provides time and cost integration; calculates energy efficiency; and assists building maintenance long after project completion. Unlike CAD, BIM also modifies the collaborative nature of a construction project. Thus, subcontractors no longer review a design, submit shop drawings, and go to work. Rather, subcontractors are brought into the design process early in the project and often are asked to contribute to the design long before construction begins. Asking a contractor or subcontractor to provide design services appears to shift the roles of an architect and a contractor. So, the questions abound: Is a contractor now responsible for design? Can the contractor be held responsible for defective design? Do not fret. To date, there has been only one advertised case addressing BIM liability. The reason is simple. For almost a hundred years, the United States Supreme Court has held that contractors are not responsible for defective design on a traditional design-bid-build project. Using BIM, therefore, should not modify a contractor’s responsibility. But, to ensure that your obligations do not extend beyond construction, all BIM requirements should be in writing and made part of your contract. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Terminating A Subcontractor Or Sub-Tier Contractor—Not So Fast—Read Your Contract!

May 24, 2018 — John P. Ahlers - Ahlers Cressman & Sleight PLLC Blog
Every few months I receive a call from a general contractor or subcontractor who has just terminated a subcontractor or sub-tier contractor for non-performance and is “checking in with me to see if there are any liability issues.” After the termination has taken place, if the termination is wrongful, there are serious legal consequences. Calling your lawyer after the fact will not cure missteps in the termination process. Termination for non-performance is a common term in most contract documents. As courts interpret contracts, however, the right to earn revenue from a contract is a substantial interest, and courts generally “abhor” forfeitures (termination) of that right. In other words, the courts will strictly determine whether the terminating party to a contract has complied with the termination process to the letter. A recent example from Connecticut is instructive in this regard. [1] The general contractor on a large hospital project in Connecticut terminated its electrical subcontractor, hired others to finish the electrical subcontractor’s work, and then sued the electrical subcontractor for $26 million. The electrical subcontractor countersued the general contractor for $3.6 million of work that it had completed at the time of the termination which had not been paid for. The subcontractor claimed that due to the many changes that had occurred on the project, it stopped work because the changes altered the contract to the point that it was no longer the same contract. The subcontractor walked off the project and the general contractor then terminated the subcontractor and re-procured the work from other subcontractors. Read the court decision
Read the full story...
Reprinted courtesy of John P. Ahlers, Ahlers Cressman & Sleight PLLC
Mr. Ahlers may be contacted at john.ahlers@acslawyers.com

Texas Couple Claim Many Construction Defects in Home

October 08, 2013 — CDJ STAFF
A Galveston, Texas couple has claimed that their new home has “many” defects and are suing the seller. John Klein and Cheri Harmon-Klein state that they were told that the house was built in conformance with the International Residential Code and that the all hurricane damage had been repaired. Instead, they characterized the house as “unfit for human habitation.” The couple claims that the defects were not evident at inspection prior to their purchase. Read the court decision
Read the full story...
Reprinted courtesy of

Residential Contractors, Be Sure to Have these Clauses in Your Contracts

May 16, 2018 — Christopher G. Hill - Construction Law Musings
I have often “mused” on the need to have a good solid construction contract at the beginning of a project. While this is always true, it is particularly true in residential contracting where a homeowner may or may not know the construction process or have experience with large scale construction. Often you, as a construction general contractor, are providing the first large scale construction that the homeowner has experienced. For this reason, through meetings and the construction contract, setting expectations early and often is key. As a side note to this need to set expectations, the Virginia Department of Professional and Occupational Regulation (DPOR) and the Virginia General Assembly require certain clauses to be in every residential construction contract. DPOR strictly enforces these contractual items and failure to put them in your contracts can lead to fines, penalties and possibly even revocation of a contractor’s license. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Federal Judge Issues Preliminary Injunction Blocking State's Enforcement of New Law Banning Mandatory Employee Arbitration Agreements

February 24, 2020 — Amy R. Patton, Jeffrey K. Brown & Tyler B. Runge - Payne & Fears
On January 31, 2020, Judge Kimberly Mueller issued a preliminary injunction "in full" preventing the State of California from enforcing AB 51, the state's new law effectively banning mandatory employee arbitration agreements. As we previously reported, AB 51 adds section 432.6 to the Labor Code and section 12953 to the Government Code, which together prohibit employers from requiring an employee, as a condition of employment, continued employment, or receipt of employment-related benefits, to waive any right, forum, or procedure to pursue a claim under the California Fair Employment and Housing Act or the Labor Code. In other words, AB 51 bans mandatory employment arbitration agreements for employment-related claims. In early December 2019, the U.S. Chamber of Commerce and a coalition of business organizations sued the state of California in federal court in a bid to have AB 51 declared preempted --- and therefore unenforceable --- by the Federal Arbitration Act. The case is Chamber of Commerce of the United States v. Becerra, Case No. 2:19-cv-2456 KJM DB (E.D. Cal.). On December 30, 2019, Judge Mueller issued a temporary restraining order preventing the state from enforcing AB 51 pending the resolution of plaintiffs' motion for a preliminary injunction. You can read our report here. Reprinted courtesy of Payne & Fears attorneys Amy R. Patton, Jeffrey K. Brown and Tyler B. Runge Ms. Patton may be contacted at arp@paynefears.com Mr. Brown may be contacted at kb@paynefears.com Mr. Runge may be contacted at tbr@paynefears.com Read the court decision
Read the full story...
Reprinted courtesy of

There's No Place Like Home

March 02, 2020 — Brian Brenner - Engineering News-Record
Two things that generally do not go well together, bridges and tornadoes, collided with unfortunate results on July 21, 2003. On that date, a tornado struck the Kinzua viaduct in northwestern Pennsylvania. The old bridge structure already had deteriorated foundation supports, which were then under repair. The tornado lifted parts of the bridge off its foundation, and more than half of the structure collapsed. Brian Brenner, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES