Seattle Washington Building Expert Directory

Environmental and Regulatory Law Update: New Federal and State Rulings

April 19, 2022 — Anthony B. Cavender - Gravel2Gavel
The first quarter of 2022 has yielded a number of decisions, reversals and agency adjustments worth note. FEDERAL CIRCUIT U.S. Court of Appeals for the D.C. Circuit – Food & Water Watch v. Federal Energy Regulatory Commission On March 11, 2022, the court decided the FERC case. On December 19, 2019, the Commission issued a Certificate to Tennessee Gas Pipeline and determined that a “modest expansion” and upgrade of the existing 11,000-mile natural gas pipeline would have no significant environmental impact. However, one of the Commissioners filed a partial dissent, arguing that the Commission’s treatment of the climate change impacts was inadequate. A petition for review was filed, and now the court has decided that the Commission erred in not accounting for the indirect effects of the expansion, namely the downstream emissions of greenhouse gas generated by the pipeline’s delivery of the gas to its customers. Consequently, NEPA’s requirement that a rigorous environmental assessment be made before the authorization was granted was violated. However, the court decided against vacating the Commission’s orders, which would have had a “disruptive effect” on the project which is, or soon will be, operational. Read the court decision
Read the full story...
Reprinted courtesy of Anthony B. Cavender, Pillsbury
Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com

Another Case Highlighting the Difference Between CGL Policies and Performance Bonds

January 07, 2015 — David M. McClain – Colorado Construction Litigation
During the summer of 2011, Ellis Construction hired Cool Sunshine Heating & Air Conditioning to install the HVAC systems in a single-family home it was building for Gary Doberman and Ellen Robertson in Boulder, Colorado. The homeowners took issue with much of the work performed on their home and tried to negotiate directly with Ellis Construction. When those negotiations broke down, the homeowners sent a notice of claim pursuant to the Construction Defect Action Reform Act, C.R.S. § 13-20-801, et seq. One of the defects alleged in the notice of claim was that the SEERS 13 compressor installed by Cool Sunshine was inappropriate for the system and that because it was installed to run on only one stage, it did not meet the City of Boulder’s code requirements for noise levels. The homeowners therefore requested that the compressor be replaced with a SEERS 20 compressor, which would comply with the Boulder City Code. Read the court decision
Read the full story...
Reprinted courtesy of David M. McLain, Higgins, Hopkins, McLain & Roswell, LLC
Mr. McLain may be contacted at mclain@hhmrlaw.com

Connecting Construction Project Information: Open Technology Databases Improve Project Communication, Collaboration and Visibility

March 14, 2018 — Andy Kayhanfar - InEight
The construction industry has been plagued for decades with projects coming in over budget and behind schedule. There are many reasons this happens, but it ultimately comes down to just one thing – a lack of connected information. Today, gigabytes and even terabytes of data are generated on a project and housed in different systems that do not talk or share information, which creates a closed approach and inhibits collaboration. Data is siloed and only accessible to certain companies, departments or disciplines, which gives each project stakeholder a very limited view into the status of the project as they are making decisions. To be successful, the construction industry needs to free project data from closed systems. There must be a way to give all project stakeholders access to accurate information within the context of how it applies to the overall project that will empower everyone from owners to engineers to contractors to make timely, fully informed decisions that bring projects in on time and within budget. INTRODUCING THE OPEN TECHNOLOGY DATABASE The need for deep visibility into project information across systems and stakeholders has given rise in the construction industry to the open technology database. This approach enables project stakeholders to link the data in their existing software systems and connect that information into one centralized location. Project stakeholders can continue to use and maintain the data in their own systems while still feeding the information to the shared environment, which brings together critical project details, provides context for decisions and makes it easier for all parties to collaborate. Project stakeholders are now able to connect business data related to estimating, cost control, scheduling, contracts, purchasing, accounting and more. This creates a common data set across the project that can be quickly accessed and can easily be put in the hands of project decision makers. Innovative companies are taking this connectivity to a new level. They see the potential to use 3D models beyond simply the design aspects of a project and bring them into the activities of construction. Innovators are taking all the project information available in the shared environment and connecting it to the 3D model to create a comprehensive view of the project. Read the court decision
Read the full story...
Reprinted courtesy of Andy Kayhanfar, Construction Executive, a Publication of Associated Builders and Contractors. All Rights Reserved

Select the Best Contract Model to Mitigate Risk and Achieve Energy Project Success

October 17, 2022 — Gregory S. Seador - Construction Executive
Power and energy projects are inherently complex and risky. Therefore, management and proper allocation of risk among project participants are essential to success. Careful drafting of the engineering, procurement and construction (EPC) contract is a critical first step in managing risk. The standard contract format used for power and energy construction projects is the EPC contract. In its traditional form, the EPC contract makes the EPC contractor responsible for the entire project, including engineering (design of the power plant), procurement (purchase, installation and performance of all equipment) and construction (construction of the plant). EPC contracts can, however, employ different contract models and pricing structures, each of which carries differing levels of risk for project participants. Selecting the appropriate contract model and pricing structure to meet the unique needs of the project is important. Reprinted courtesy of Gregory S. Seador, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Seader may be contacted at seador@slslaw.com

Sometimes, Being too Cute with Pleading Allegations is Unnecessary

June 06, 2018 — David Adelstein - Florida Construction Legal Updates
There are times where being too darn cute with your pleading allegations is unnecessary and does not work. But, the point is really that the cuteness is unnecessary. In a Miller Act payment bond dispute in Boneso Brothers Construction, Inc. v. Sauer, Inc., 2018 WL 2387833 (N.D.Cal. 2018), a claimant asserted claims against a Miller Act payment bond surety for breach of the payment bond, breach of a subcontract, open account, and account stated. The question is why would the claimant sue the payment bond surety for breach of subcontract (when the subcontract was not with the surety), and open account and account stated. I have no clue, other than such claims appeared quite unnecessary when the claimant asserted an action on the Miller Act payment bond (which is what the surety is liable under — actions under the statutory payment bond). Such claims were dismissed. And, they should have been. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at dadelstein@gmail.com

Library to Open with Roof Defect Lawsuit Pending

December 04, 2013 — CDJ STAFF
Repairs to the Medina County District Library in Lodi, Ohio should be complete next spring. The library’s lawsuit over the roof is just beginning. The library building was a $3 million project in 2005, but the building had to close in 2011 when it was determined that the roof was not structurally sound. The lawsuit names six defendants, including the contractor, the framing subcontractor, and the engineering firm. The library seeking damages, legal expenses, and attorney fees. The cost of replacing the roof was $1.5 million. Read the court decision
Read the full story...
Reprinted courtesy of

Important Information Regarding Colorado Mechanic’s Lien Rights.

November 07, 2012 — David McLain, Colorado Construction Litigation
With payment problems in the construction economy having accelerated over the past few years, there has been a substantial increase in mechanic’s lien activity and associated litigation. The typical mechanic’s lien claimant is a material supplier, a trade subcontractor, or even a general contractor that has not been paid by the developer/owner of the construction project. The reason for filing a mechanic’s lien claim is that it offers the prospect in many cases to make the unpaid construction professional a priority creditor, with a lien on the real estate that is superior to the construction lender. One of the primary rules governing a mechanic’s lien claim is that the creditor’s formal written “Notice of Intent to File a Mechanic’s Lien” (hereafter “Lien Notice”) must be (1) served on the owner of the property for which the work was done or the materials used, and (2) served at the same time on the general contractor who has handled the construction project. After the creditor has made service of the lien claim by USPS certified mail (using the green return receipt card for proof of service) or separate personal delivery of the notice to the property owner and general contractor, ten full days must pass (not including the date of mailing of the notices) before the lien notice is filed in the public records. After ten days have expired following the date of mailing using certified mail, or personal delivery of the notice to the property owner and the general contractor, the lien notice can be filed to make the lien valid. Read the court decision
Read the full story...
Reprinted courtesy of David M. McLain, Higgins, Hopkins, McLain & Roswell, LLC.
Mr. McLain can be contacted at mclain@hhmrlaw.com

Understanding the Details: Suing Architects and Engineers Can Get Technical

November 02, 2017 — Steven M. Cvitanovic & Stephen M. Tye - Haight Brown & Bonesteel LLP
Before suing an architect or engineer for professional negligence, a plaintiff must obtain a “certificate of merit” (“Certificate”) under Code of Civil Procedure section 411.35. Boiled down to the basics, the Certificate declares that the attorney consulted with and received an opinion from an expert that a reasonable and meritorious case exists against said design professional. The Certificate must be filed before serving the complaint on any defendant, but can be filed within 60 days under certain circumstances. This rule was recently analyzed against another long-standing rule in California, known as the “relation-back doctrine.” Under the relation-back doctrine, a court will deem a later-filed pleading, such as an amended complaint, to be deemed filed at the time of an earlier complaint. In Curtis Engineering Corp. v. Superior Court of San Diego County, No. D072046, (Cal. Ct. App. 10/23/17), the Fourth Appellate Court considered the interplay between section 411.35 and the relation-back doctrine, holding that a Certificate filed more than 60 days after filing the original pleading does not relate back to the filing of the original pleading. Reprinted courtesy of Steven Cvitanovic, Haight Brown & Bonesteel LLP and Stephen Tye, Haight Brown & Bonesteel LLP Mr. Cvitanovic may be contacted at scvitanovic@hbblaw.com Mr. Tye may be contacted at stye@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES