Protecting and Perfecting Your Mechanics Lien when the Property Owner Files Bankruptcy
June 19, 2023 —
William L. Porter - Porter Law GroupIntroduction/Overview of the Mechanics Lien Law
The California mechanics lien is a powerful tool for contractors, subcontractors and materials suppliers to secure payment of unpaid construction debts. A contractor, subcontractor or materials supplier is allowed to record a mechanics lien on real property, based on the value added to the property by the claimant during the construction process.
The recorded mechanics lien provides the claimant with legal right to force the sale of the improved real property and thereby obtain the funds necessary to pay the delinquent debt. Under the usual procedure, the first step is the recording of mechanics lien with County Recorder’s office in the County where the property is located. A lawsuit to foreclose on the lien must then be filed in the County Superior Court of that County, within ninty (90) days after the mechanics lien is recorded. The goal of the lawsuit is to obtain a judgment for foreclosure on the mechanics lien by way of a forced sale of the property. The net proceeds of the sale will be used to pay the unpaid construction debt secured by the recorded mechanics lien, assuming that sale proceeds exceed the amount of senior liens and encumbrances.
Read the court decisionRead the full story...Reprinted courtesy of
William L. Porter, Porter Law GroupMr. Porter may be contacted at
bporter@porterlaw.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
$109-Million Renovation Begins on LA's Willowbrook/Rosa Parks Station
October 02, 2018 —
Greg Aragon - Engineering News-RecordThe Los Angeles County Metropolitan Transportation Authority (Metro), along with the Los Angeles office of Stantec, recently began work on the $109-million Willowbrook/Rosa Parks Station Improvement Project in Los Angeles.
Read the court decisionRead the full story...Reprinted courtesy of
Greg Aragon, ENRENR may be contacted at
ENR.com@bnpmedia.com
Homebuilder Predictions for Tallahassee
October 10, 2013 —
CDJ STAFFThe cost of putting up a new home in Tallahassee has risen, but Joe Manausa thinks that builders might be putting up homes that will cost more than home buyers are able to pay. He notes that permits and sales are up, but numbers are still well below those in 2006.
Mr. Manusa thinks that Tallahassee could face “a need (demand) for homes priced below $300,000, but a glut of supply for those priced above $300,000.” He says that home builders “need to target construction opportunities below that price point.”
He notes that average price of new construction is $272,000, but resales are going for $161,000, which puts quite a premium on a new home.
Read the court decisionRead the full story...Reprinted courtesy of
California’s Right to Repair Act not an Exclusive Remedy
August 20, 2014 —
Beverley BevenFlorez-CDJ STAFFKaren L. Moore of Low, Ball & Lynch in JD Supra Business Advisor analyzed “two decisions holding that California’s Right to Repair Act ('SB 800') is not the exclusive remedy for a homeowner seeking damages for construction defects that have also resulted in property damage.” If property damage occurs due to construction defects, a homeowner “may also pursue common law tort causes of action.”
After providing a brief background of California’s SB 800 and Aas v. Superior Court (which precluded the Right to Repair Act), Moore discussed the results of Liberty Mutual Insurance Company v. Broofield Crystal Cove, LLC, followed by a review of Burch v. Superior Court. Moore commented that “[t]hese two cases will likely be used by homeowners to avoid application of the Right to Repair Act’s pre-litigation procedures.”
Read the court decisionRead the full story...Reprinted courtesy of
WSHB Secures Victory in Construction Defect Case: Contractor Wins Bench Trial
October 01, 2024 —
Wood Smith Henning & BermanWood Smith Henning & Berman is pleased to announce a significant victory in a bench trial led by trial attorney
Thomas Fama. The case, which had been pending for nearly five years due to pandemic-related delays and unreasonable demands by the plaintiff, concluded with a resounding judgment in favor of the defendant.
"The result of this trial is a testament to our team's unwavering tenacity and strategic focus throughout the entire process," stated WSHB partner Tom Fama, lead counsel in the case. "We kept our eye on the proverbial ball and diligently worked to expose the lack of evidence supporting the plaintiff's claims."
The matter involved allegations of defective installation of a solar energy system, which the plaintiff claimed leaked during inclement weather. Fama and his team successfully demonstrated that the plaintiff's claims lacked substance, highlighting numerous pre-existing conditions on the roof that could have been responsible for the problem.
Read the court decisionRead the full story...Reprinted courtesy of
Wood Smith Henning & Berman
A Lot of Cheap Housing Is About to Get Very Expensive
October 21, 2015 —
Patrick Clark – BloombergUrban Institute fellow Erika Poethig has a poster in her office showing 22 apartment buildings along Chicago's Lake Shore Drive. They were all built with U.S. government dollars to provide affordable housing to thousands of low-income households—and have since been converted to market-rate apartments and condominiums.
For Poethig, a former official at the Department of Housing and Urban Development, those apartments are a warning.
There are currently about 1.34 million units of affordable housing created by a HUD program known as Section 8 project-based rental assistance, according to a blog post published on Wednesday by Poethig and her Urban Institute colleague Reed Jordan. More than 30 percent of those units are kept affordable by contracts that are set to expire by the end of 2017.
Read the court decisionRead the full story...Reprinted courtesy of
Patrick Clark, Bloomberg
America’s Factories Weren’t Built to Endure This Many Hurricanes
November 05, 2024 —
Brooke Sutherland - BloombergAmerica’s factories aren’t built for the current cascade of extreme weather events.
Dozens of
industrial sites were in the zone of impact as Hurricane Milton slammed into Florida’s West Coast this week, including several concrete plants, speed boat manufacturing operations and facilities owned by
Honeywell International Inc., Johnson Controls International Plc,
General Electric Co. and Illinois Tool Works Inc., among others. Meanwhile, a Baxter International Inc. facility in Marion, North Carolina, that makes 60% of the intravenous fluids used in hospitals around the country was
shuttered because of damage from Hurricane Helene just two weeks ago. Mines responsible for producing more than 80% of the world’s supply of commercial high-purity quartz in nearby Spruce Pine
were also affected by severe flooding, raising the risk of disruptions to semiconductor production, which relies on the material.
Read the court decisionRead the full story...Reprinted courtesy of
Brooke Sutherland, Bloomberg
