Seattle Washington Building Expert Directory

The Construction Industry's Health Kick

October 02, 2018 — Erin Ansley - Construction Executive
The construction industry appears to be on a health kick, and by all accounts it isn’t a fad. Trends identified in recent years in the health care sector are strengthening with a surge of new projects nationwide. “All parts of the country are experiencing significant health care design and construction activity,” observes Hank Adams, HDR’s global director of health. “We’re expecting continued growth into the near future and feel optimistic that the marketplace will continue to be strong.” Modern urban planning strategies, engineering advancements and sophisticated design take center stage as oversized hospitals serving large patient populations within a 100-mile radius make way for more specialized centers that target the overall wellness of the local community. Reprinted courtesy of Erin Ansley, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

ASCE Statement on Biden Administration Permitting Action Plan

May 23, 2022 — Dennis D. Truax, President, American Society of Civil Engineers (ASCE)
Washington, DC. – ASCE applauds the Biden Administration for the development of their new Permitting Action Plan aimed at accelerating the federal permitting and environmental review process for major infrastructure projects across the country. The plan leverages permitting provisions that were included in the Infrastructure Investment and Jobs Act and aims to ensure that the federal environmental review and permitting processes will be efficient, transparent, guided by science, and shaped by meaningful input from the public and government agencies. One of the key recommendations in the 2021 Report Card for America's Infrastructure was to streamline the project permitting process across infrastructure sectors, while ensuring appropriate safeguards and protections are in place. Therefore, ASCE believes that the most recent plan is a step in the right direction to ensure that projects can be delivered on-time, and on-budget, while maintaining the rigorous environmental review process. ABOUT THE AMERICAN SOCIETY OF CIVIL ENGINEERS Founded in 1852, the American Society of Civil Engineers represents more than 150,000 civil engineers worldwide and is America's oldest national engineering society. ASCE works to raise awareness of the need to maintain and modernize the nation's infrastructure using sustainable and resilient practices, advocates for increasing and optimizing investment in infrastructure, and improve engineering knowledge and competency. For more information, visit www.asce.org or www.infrastructurereportcard.org and follow us on Twitter, @ASCETweets and @ASCEGovRel. Read the court decision
Read the full story...
Reprinted courtesy of

Anatomy of an Indemnity Provision

January 28, 2015 — Garret Murai – California Construction Law Blog
Indemnity clauses are one of the most negotiated (and litigated) provisions in a construction contract. They are also one of the most least understood. But we’re here to dissect it for you, so to speak. What is an indemnity clause? An indemnity clause is simply a risk transfer provision that seeks to transfer risk from one party to another party. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

When is Construction Put to Its “Intended Use”?

October 10, 2013 — Brady Iandiorio — Higgins, Hopkins, McLain & Roswell, LLC.
Defining words and phrases in the law can be a tricky proposition. In everyday life one would presume to know what the phrase “intended use” would mean, but when it comes to litigation, oftentimes the definitions become much more nuanced. On March 12, 2013, in the Bituminous Cas. Corp. v. Hartford Cas. Ins. Co. v. Canal Ins. Co., WL 950800 (D. Colo. 2013) case, Senior District Court Judge Wiley Y. Daniel denied Third-Party Defendant Canal Insurance Company’s (“Canal”) motion to dismiss Third-Party Plaintiff Hartford Casualty Insurance Company’s (“Hartford”) third-party complaint. The case arose out of a liability insurance coverage dispute related to an underlying construction defect lawsuit. In the construction defect suit, a plaintiff homeowner’s association brought a suit against a developer and a general contractor (“GC”) among others. While the underlying action was settled, a dispute remained between Bituminous Casualty Corporation, which insured the GC, and Hartford, which insured the developer. Hartford asserted third-party claims against Canal seeking a declaration of Canal’s obligations and contribution in the event Hartford owed any defense or indemnity obligations to the GC. Hartford’s claims are based on the premise that Canal owed a duty to defend and/or indemnify the GC in the underlying action. Read the court decision
Read the full story...
Reprinted courtesy of Brady Iandiorio
Brady Iandiorio can be contacted at Iandiorio@hhmrlaw.com

Construction Law Advisory: Mechanical Contractor Scores Victory in Prevailing Wage Dispute

September 03, 2014 — Steven M. Cvitanovic & Jessica M. Lassere Ryland - Haight Brown & Bonesteel LLP
On August 27, 2014, the First District Court of Appeal weighed in on whether prevailing wages are required for public contracts in situations where work is performed in furtherance of the project but at a permanent offsite manufacturing facility that is not exclusively dedicated to the project. In Sheet Metal Workers' International Association, Local 401 v. John C. Duncan and Russ Will Mechanical, the project at issue was for a community college district where Russ Will was the HVAC subcontractor. The contract documents required contractors to pay prevailing wages but they did not limit where or how Russ Will would fabricate sheet metal required for the job. Russ Will used its existing fabrication facility to form the sheet metal. An employee of Russ Will filed a complaint with the DIR alleging he should have been paid prevailing wages for work related to the project. The worker fabricated sheet metal for the project but at Russ Will’s Hayward facility, not at the site. The DIR issued a coverage determination in which it concluded that Russ Will was required to pay prevailing wages for the offsite fabrication work associated with the project. The DIR's determination turned on whether Russ Will was exempt from the prevailing wage law as a material supplier. To qualify for the material supplier exemption, the employer must sell supplies to the general public and its fabrication or manufacturing facility must not be established for the particular public works contract or be located at the site of the public work. Following the DIR determination, Rush Will filed an administrative appeal. The department reversed its initial coverage determination, concluding that the offsite fabrication performed by Russ Will was not subject to the prevailing wage law. Reprinted courtesy of Steven M. Cvitanovic, Haight Brown & Bonesteel LLP and Jessica M. Lassere Ryland, Haight Brown & Bonesteel LLP Mr. Cvitanovic may be contacted at scvitanovic@hbblaw.com; Ms. Ryland may be contacted at jlassere@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Replacement of Defective Gym Construction Exceeds Original Cost

January 22, 2013 — CDJ STAFF
Austin, Texas has torn down a school gym, the Turner-Roberts Recreation Center at the Overton Elementary School, due to structural problems which became evident after the gym was completed four years ago. The cost of the new gym is $6.4 million, more than the cost of building the gym in the first place. The city is paying $3 million in repair costs with the rest of the money coming from the companies that designed and built the now demolished gym. According to the Austin Statesman, the total cost to the city will be about $8.6 million. The Turner-Roberts Recreation Center cost $5.6 million to build, but soon after it opened, structural problems were discovered. Cracks formed in walls and glass doors buckled. The settlement with the designer, contractor, and engineering firm did not require the firms to admit fault as they paid $3.4 million to fix the situation. The Statesman was unable to get a breakdown of how much each firm paid. Tom Cornelius, president of the GSC, the architectural firm on the project told the Statesman that "the foundation issues were not caused by design defects." Initially, the city sought to repair the gym, but early excavation determined that the defects were too extensive. In addition to the structural flaws, it was also determined that the HVAC system was faulty. Excavation also damaged plumbing work. Tearing down the gym turned out to be the most cost-effective response. Read the court decision
Read the full story...
Reprinted courtesy of

Balancing Cybersecurity Threats in Smart Cities: Is the Potential Convenience of “Smart” Intersections Worth the Risk?

September 02, 2024 — James P. Bobotek & Brian E. Finch - Gravel2Gavel Construction & Real Estate Law Blog
The term “smart cities” has become popular parlance for municipalities’ attempts to enhance delivery of urban services and infrastructure through information and communications technology. While they may conjure images of neon-lit high rises or streetscapes populated by sleek, hovering vehicles, a bit like the 1960s-era The Jetsons cartoon envisioned our high-tech future, the reality of smart cities has begun to emerge in more subtle, less glamourous forms. Cities tend to focus on wastewater monitoring, traffic control and energy distribution technologies in their efforts to become incrementally “smarter.” Smart cities lean heavily on automation, internet connectivity and the Internet of Things (IoT)—including smartphones, connected cars and a host of web-based appliances and utilities—to boost the delivery and quality of essential urban services and infrastructure like transit, sanitation, water, energy, emergency response and more. Successful smart cities need infrastructure that supports such connectivity, and they pull data from hundreds, or even thousands, of sensors that can be used to analyze and shepherd the direction of resources. Reprinted courtesy of James P. Bobotek, Pillsbury and Brian E. Finch, Pillsbury Mr. Bobotek may be contacted at james.bobotek@pillsburylaw.com Mr. Finch may be contacted at brian.finch@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

It’s a Jolly Time of the Year: 5 Tips for Dealing with Construction Labor Issues During the Holidays

December 18, 2022 — Matthew DeVries - Best Practices Construction Law
It’s that time of year again – the holiday season is upon us, and for those in the construction industry, that can mean a few extra challenges when it comes to maintaining efficiency on the job site. Here are five best practices for dealing with labor during the holiday season:

Communicate early and often: Make sure to clearly communicate any changes to the schedule or workload to your team as early as possible. This will give them time to plan and prepare, and help prevent any potential issues from arising.
Offer incentives: Consider offering incentives to encourage your team to stay focused and productive during the holiday season. This could be something as simple as a bonus or extra time off, or something more creative like a gift card or other prize.
Stay organized: The holiday season can be a busy time, so it’s important to stay organized and on top of your schedule. This means keeping track of deadlines, delegating tasks effectively, and staying in close communication with your team.

Read the court decision
Read the full story...
Reprinted courtesy of Matthew DeVries, Burr & Forman LLP
Mr. DeVries may be contacted at mdevries@burr.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES