Seattle Washington Building Expert Directory

With Trump's Tariff Talk, Time to Negotiate for Escalation Clauses in Construction Contracts

December 17, 2024 — Richard Korman - Engineering News-Record
Remember 2019? That’s when contractors faced sudden material price surges from tariffs during then-President Donald Trump’s first term in office. How about 2021? That's when contractors saw new price surges and long delivery delays because of Covid-19. Read the court decision
Read the full story...
Reprinted courtesy of Richard Korman, ENR
Mr. Korman may be contacted at kormanr@enr.com

Court Finds Matching of Damaged Materials is Required by Policy

April 02, 2024 — Tred R. Eyerly - Insurance Law Hawaii
The court granted, in part, the insured's motion for summary judgment by finding that matching roof tiles were required under the policy. Bertisen v. Travelers Home and Marine Ins. Co., 2024 U.S. Dist. LEXIS 3907 (D. Colo. Jan. 8, 2024). The insureds sued Travelers for breach of contract, common law bad faith, and unreasonable delay or denial of benefits. They alleged that their residence was damaged by a hailstorm and that Travelers breached their policy and acted in bad faith in the handling of the claim. The insureds demanded an appraisal to determine the "amount of loss" under the policy and an appraisal award was issued. Travelers then denied payment for all roof tiles that were contemplated by the appraisal award. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Approaching Design-Build Projects to Avoid (or Win) Disputes

August 07, 2023 — Stuart Eisler - Construction Executive
Stakeholders engage in design-build projects believing the collaborative nature better aligns parties' interests and reduces overall risk exposure. Each of the lead parties bases this belief on different factors—the owner sees an opportunity to reduce change-order exposure and improve delivery times, the design-builder (or contractor) aims to control design volatility by ensuring project components match budgeted projections, and the designer intends to benefit by greater constructability review from the design-builder team and often additional time to detail designs. Rarely do design-build parties contemplate claims arising while initiating a project. This being said, design-build projects carry unique, inherent risks due to the award of often fixed-price contracts utilizing incomplete, preliminary designs. As scopes creep and costs balloon, previously harmonious parties experience discord and lurking claims. While the majority of design-build projects are completed without major dispute, there are strategies available to further avoid disputes and prevail in those that are unavoidable. Reprinted courtesy of Stuart Eisler, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

The Top 10 Changes to the AIA A201: What You Need to Know

May 24, 2018 — Christopher G. Hill - Construction Law Musings
For this week’s Guest Post Friday here at Musings, we welcome back Melissa Dewey Brumback. Melissa is a construction law attorney with Ragsdale Liggett in Raleigh, North Carolina. Aside from the fact that she is a UNC grad and fan, she’s okay! In 2017, as it does every ten years, the American Institute of Architects (AIA) updated most of its standard form contract documents, including the A201 General Conditions. This cycle, the contract changes are evolutionary in nature, not revolutionary. Even so, it is crucial to know the changes to avoid making a fatal mistake that could cost you money on a construction project. In reverse order, the top 10 changes you need to know include: # 10: Differing Site Conditions Prior editions of the A201 provided that upon encountering differing site conditions, the Contractor was to promptly provide notice to the Owner and Architect, before the conditions are disturbed, and in no event later than 21 days after the conditions were first observed. A201–2017 shortens the time for notice from 21 to 14 days. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

US Homes Face Costly Retrofits for Induction Stoves, EV Chargers

May 20, 2024 — Kendra Pierre-Louis - Bloomberg
Buyers of new homes in the US may find themselves saddled with electrical systems better suited to the 20th century than the 21st. The International Code Council, which sets model construction standards for new homes, was expected to include building electrification measures in its 2024 energy code on March 20. But following appeals lodged by industry groups, the ICC board moved the measures to the code’s appendices, effectively making them optional, as first reported by the Huffington Post. If new homes aren’t wired for increasing power needs from electric appliances and car chargers, it will bump the effort and cost of making such upgrades onto homeowners — a deterrent to going electric. Energy efficiency advocates say this could slow the pace of the energy transition, costing both jobs and the planet. Read the court decision
Read the full story...
Reprinted courtesy of Kendra Pierre-Louis, Bloomberg

Contractor Covered for Voluntary Remediation Efforts in Completed Homes

October 10, 2013 — Tred Eyerly — Insurance Law Hawaii
The Texas Supreme Court held that a home builder was covered for the voluntary removal and replacement of a defective insulation product it had installed in hundreds of homes. Lennar Corp. v. Market Am. Ins. Co., 2013 Tex. LEXIS 597 (Tex. Sup. Ct. Aug. 23, 2013). Lennar built homes using an exterior insulation and finish system (EIFS). It was subsequently determined that EIFS trapped water inside homes with wood-frame walls, causing rot and structural damage, mildew and mold, and termite infestation. Lennar decided to contact all its homeowners and offer to remove the EIFS and replace it with conventional stucco. Lennar notified its insurers that it would seek indemnification for the costs. The insurers refused to participate in Lennar's proactive efforts, preferring to wait and respond to homeowners' claims one by one. Read the court decision
Read the full story...
Reprinted courtesy of Tred Eyerly
Tred Eyerly can be contacted at te@hawaiilawyer.com

Challenging and Defending a California Public Works Stop Payment Notice: Affidavit vs. Counter-Affidavit Process

October 21, 2019 — William L. Porter - Porter Law Group
One of the most effective collection procedures available to subcontractors and suppliers to California Construction projects is the “stop payment notice” procedure found under California Civil Code sections 9350 – 9364. Under this procedure, the unpaid subcontractor or supplier may serve the stop payment notice on the public entity and the direct or “prime” contractor and cause the public entity to withhold from the direct contractor 125% of the funds identified in the stop payment notice. Thereafter, funds will not generally be released unless the parties reach a settlement agreement or the issue is decided through litigation, arbitration or mediation. There is however an alternative procedure available to direct contractors to expedite the determination of whether a stop payment notice is valid and to possibly obtain an early release of the funds withheld by the public entity. This “summary proceeding” process could result in release of funds to the direct contractor in less than 30 days. The summary proceeding can also be challenged by the unpaid subcontractor or supplier. All public works contractors, subcontractors and suppliers should be aware of the process. The process for direct contractors to release a stop payment notice and for subcontractors and suppliers to challenge the process works as follows: After a California stop payment notice has been served and the public entity has withheld funds accordingly, the direct contractor may challenge the stop payment notice by serving an “affidavit” (basically a sworn statement showing why the stop notice is not valid) on the public entity, demanding that the public entity release all funds withheld. Upon receipt of such an affidavit, the public entity will serve the subcontractor or supplier who served the stop payment notice with a copy of the affidavit, along with a “demand for release of funds”. If the stop payment notice claimant does not respond with a “counter-affidavit” by the date stated on the notice sent by the public entity (“not less than 10 days nor more than 20 days after service on the claimant of a copy of the affidavit”), then the public entity will be within its rights to release the withheld funds to the direct contractor, and the stop payment notice claimant will relinquish its stop payment notice rights. Read the court decision
Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com

Mitigating Mold Exposure in Manufacturing and Multifamily Buildings

July 31, 2024 — Laura Champagne - Construction Executive
As hurricanes season and summer storms approach, more apartment complexes, commercial and industrial properties, and public buildings are at risk of leaking and flooding. Water-saturated structures are prime breeding grounds for mold, but there are ways to prevent, detect and remove it before it becomes a serious and costly issue—for buildings and building residents alike. Being proactive limits an owner’s exposure to the liability of debilitating health effects and structural safety concerns. Mold requires three things to grow: water, food and humidity. Water will stealthily penetrate small porous surfaces of any building material, such as drywall, plaster, wood, concrete or even fabrics. These materials serve as a food source to quickly produce more fungus. Common sources of undetected water flow include foundation problems, poorly installed windows, roof malfunctions, gutter clogs, storm damage, leaky pipes, improper drainage, HVAC issues, faulty appliances, bathroom vent issues and wet building materials. Mold loves humidity and thrives in dark, warm environments, such as attics, basements, lofts, building corners and bathrooms. Reprinted courtesy of Laura Champagne, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES