Fairfield Connecticut Building Expert Directory

Florida High-Rise for Sale, Construction Defects Possibly Included

October 30, 2013 — CDJ STAFF
The owners of One Bal Harbour in Bal Harbour, Florida have filed for bankruptcy and are seeking to sell off the luxury condominium and hotel building. There have been problems with the building, including flooding and allegations of structural defects. The original developer went bankrupt and sold before the construction defect lawsuits begain. The building’s opening price of $13 million won’t wipe out Elcom’s $20 million in debt. Read the court decision
Read the full story...
Reprinted courtesy of

What to Expect From the New Self-Retracting Devices Standard

November 29, 2021 — Andre Pelland - Construction Executive
One of the latest and most anticipated changes to occur this year relevant to fall protection is the publishing of the ANSI/ASSP Z359.14 2021 revision. Although the effective date isn’t until August 2022, this change is prompting the need for end user to prepare for using and understanding the new terminology performance requirements that will ultimately alter equipment selection criteria. The reason for its relevance is mostly due to its industry dependence and the increasing popularity of these types of devices. This voluntary consensus standard accounts for a vast portion of the fall protection market equipment and has been adopted as the industry standard, even though it is not the legal requirement. To assure a smooth transition, the immediate priority should be to understand the changes and what it means from a usability standpoint. A clear understanding of what changes devices need to comply will allow users to proceed with a comprehensive transition plan. What Are the Most Relevant Changes for the User? Classes The most significant changes are for Class A and B devices used to designate arrest distances and forces and the introduction of the Class 1 and 2 devices. These classes were known as designators for arresting falls at 24 inches and under with higher forces (Class A), and 54 inches and under with lower forces (Class B). Class 1 devices allow anchoring on overhead anchorages only and limitg freefall to no more than two feet. Reprinted courtesy of Andre Pelland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Pelland may be contacted at andre.pelland@puresafetygroup.com

Administrative and Environmental Law Cases Decided During the U.S. Supreme Court’s 2017-2018 Term

July 28, 2018 — Anthony B. Cavender & Amy L. Pierce - Gravel2Gavel
Unlike other Terms, only a handful of cases addressed administrative and environmental law issues in the U.S. Supreme Court’s 2017-2018 Term. However, the next Term of the Court promises to be more active in these areas.

On January 22, 2018, the Court issued a unanimous opinion in the Clean Water Act (CWA) case, Nat’l Assoc. of Mfrs. v. Dep’t of Defense, holding that the plain language of the CWA requires the appeal of the Environmental Protection Agency’s (EPA) redefinition of “waters of the United States” (WOTUS Rule) must be heard first in the federal district courts. Whereas all appeals of most EPA CWA effluent limitation rules must be heard in the federal Courts of Appeals, Congress chose not to do this with respect to this definitional rule. The Court points out that reviews in the Courts of Appeals must take place within 120 days of the rule’s promulgation, but any review of a rule in the federal district court must take place within 6 years of the date the claim accrues.

Reprinted courtesy of Anthony B. Cavender, Pillsbury Winthrop Shaw Pittman and Amy L. Pierce, Pillsbury Winthrop Shaw Pittman Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com Ms. Pierce may be contacted at amy.pierce@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

How to Remove a Mechanics Lien from Your Property

March 21, 2022 — Hannah Kreuser - Porter Law Group
It sometimes happens that a contractor or material supplier records a mechanics lien on your property that becomes expired. Other times, the mechanics lien may be wrong, invalid and unenforceable for some reason, serving no legitimate purpose. The contractor or material supplier may be reasonable and release the mechanics lien once these issues are brought to its attention, but the contractor or material supplier may very well refuse to release the mechanics lien when requested. When this happens, what are your options? In California, there are various ways to bring this type of mechanics lien to a court’s attention in the hopes that the court will cause it to be released. Three of the more common methods are: (1) a petition under California Civil Code (“CCC”) § 8480; (2) a petition under California Code of Civil Procedure (“CCP”) § 765.010; or (3) a Lambert motion. This article will briefly discuss each of these methods. Read the court decision
Read the full story...
Reprinted courtesy of Hannah Kreuser, Porter Law Group
Ms. Kreuser may be contacted at hkreuser@porterlaw.com

Not All Work is Covered Under the Federal Miller Act

May 24, 2021 — David Adelstein - Florida Construction Legal Updates
The recent opinion out of the Eastern District Court of Virginia, Dickson v. Forney Enterprises, Inc., 2021 WL 1536574 (E.D.Virginia 2021), demonstrates that the federal Miller Act is not designed to protect ALL that perform work on a federal construction project. This is because NOT ALL work is covered under the Miller Act. In this case, a professional engineer was subcontracted by a prime contractor to serve on site in a project management / superintendent capacity. The prime contractor’s scope of work was completed by January 31, 2019. However, the prime contractor was still required to inventory certain materials on site, which was performed by the engineer. The engineer claimed it was owed in excess of $400,000 and filed a Miller Act payment bond lawsuit on February 5, 2020 (more than a year after the project was completed). Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

New York Court Grants Insured's Motion to Dismiss Construction Defect Case and Awards Fees to Insured

February 05, 2024 — Tred R. Eyerly - Insurance Law Hawaii
The New York Supreme Court granted the insured's motion to dismiss the insurer's complaint seeking relief on its duty to indemnity and awarded fees to the insured. Utica Mut. Ins. Co. v. Crystal Curtain Wall Sys. Corp., 2023 N.Y. Misc. LEXIS 22368 (N.Y. Sup. Ct. Nov. 27, 2023). The case arose from a construction-related property damage action. Crystal entered a subcontract with the general contractor to design and install window and curtain systems in mixed residential and commercial buildings. When unit owners took possession, water infiltration during a rainstorm caused property damage and moldy conditions. The unit owners sued asserting claims against Crystal for the cost of repair or replacement of the allegedly defective curtain wall, damage to unit owners' personal property, diminution in value of the units, and delay damages consisting of increasing interest and carrying costs. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Court Upholds $68M Jury Award Over 2021 Fatal Fall in Philadelphia

January 28, 2025 — Richard Korman - Engineering News-Record
A Pennsylvania Supreme Court judge has reaffirmed a $68.5-million jury verdict in a wrongful death case brought by the wife and child of an immigrant siding-installation worker who fell to his death while working on a small Philadelphia apartment project in late 2021. Read the court decision
Read the full story...
Reprinted courtesy of Richard Korman, Engineering News-Record

Meritage Acquires Legendary Communities

July 23, 2014 — Beverley BevenFlorez-CDJ STAFF
According to Big Builder, Meritage entered Atlanta through its acquisition of Legendary Communities for $130 million, “completing a two-year quest.” “Probably for about two years, we’ve been looking in the market, talking to builders, and studying the geography, and meeting different people to learn who the players are and learn about the area,” Meritage Homes chairman and CEO Steven J. Hilton told Big Builder. This acquisition makes Meritage Homes “the number one builder in the Greenville-Anderson-Mauldin, S.C. market, owning more than 16 percent of the 2013 market share with 266 closings, according to Metrostudy data. It also owns almost seven percent of the market share in nearby Spartanburg, S.C. with 44 closings.” Legendary fits “in very nicely with what we do at Meritage,” Hilton said to Big Builder. “We’re a strong first and second move up builder, as are they at Legendary. It’s a very complementary fit between the two companies.” Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES