Fairfield Connecticut Building Expert Directory

Aecmaster’s Digital Twin: A New Era for Building Design

May 06, 2024 — Aarni Heiskanen - AEC Business
I sat down with Anssi Auvinen, the CEO and founder of Finnish startup Aecmaster, to discuss the future of design and how the company plans to make it happen. Anssi envisions data-driven design as the next radical change in the AEC sector. Anssi Auvinen started working in the building industry as a 16-year-old construction worker. Since then, he has acquired two master’s degrees: structural engineering and architecture. During his career, Anssi has witnessed how the digitalization of the design sector has progressed, but the results for both designers and building owners could have been more impressive. That inspired him in 2019 to start up Aecmaster, a software and consulting firm that aims to fulfill the promise of digitalization. The company’s software product launched in January 2024. The need for digital twins Anssi states that you can’t say you own a building until you possess its digital assets, the digital twin. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Perrin Construction Defect Claims & Trial Conference

June 11, 2018 — Beverley BevenFlorez-CDJ STAFF
Richard Glucksman, Esquire, Partner of the Los Angeles firm Chapman Glucksman Dean Roeb & Barger, will be moderating the panel, “Green Building/LEED: An Overview and Claims Discussion” at the Perrin Construction Defect Claims & Trial Conference in Las Vegas, Nevada. The panel will be discussing the following topics:

Risk and claims case studies including solar and SIPs (Structural Insulated Panels)
Green Building/LEED and The Law: Review of National Claims/Lawsuits
AIA Documents for Sustainable Projects

Thursday, June 21st, 2018 Four Seasons Hotel 3960 S Las Vegas Blvd Las Vegas, NV 89119 Read the court decision
Read the full story...
Reprinted courtesy of

Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds

September 05, 2022 — Adam J. Weaver & Lindsey Mitchell - Gravel2Gavel Construction & Real Estate Law Blog
The 3D printing construction market is likely on the cusp of a boom. This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years. While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials. Reprinted courtesy of Adam J. Weaver, Pillsbury and Lindsey Mitchell, Pillsbury Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Trucks looking for Defects Create Social Media Frenzy

July 23, 2014 — Beverley BevenFlorez-CDJ STAFF
According to Willits News, slow-moving trucks with cameras attached rolled through Fort Briggs, attracting attention from homeowners in the community. People began mentioning the trucks on social media sites, with questions regarding what the cameras on the trucks were recording. Osmose Utilities General Manager, Jason Milligan, told Willits News that the trucks were “surveying overhead power poles and lines for PG&E.” "We're not looking for anything but what's overhead," Mulligan said, according to Willits News. "We find defects or issues with construction ... 20 or 30 feet off the ground, which are safety issues. We don't scan anything down towards people's homes." Read the court decision
Read the full story...
Reprinted courtesy of

ASCE Releases New Report on Benefits and Burdens of Infrastructure Investment in Disadvantaged Communities

February 05, 2024 — The American Society of Civil Engineers
Washington — The American Society of Civil Engineers today released a new paper, Measuring the Benefits and Burdens of Infrastructure in Disadvantaged Communities. The report looks at how several communities across the country consider equity when investing infrastructure funds, and the impact of those projects on lower-income communities. "Civil engineers are focused on improving quality of life by building systems that improve the public's health, safety, and well-being," said Marsia Geldert-Murphey, P.E., 2024 President, ASCE. "However, the decisions on how and where infrastructure is built can affect communities for decades after a project is complete. By looking at the benefits and burdens of past projects, infrastructure owners and developers can find better ways to consider the impact of infrastructure projects being designed now." Some of the recommendations in the paper include encouraging government and other infrastructure stakeholders to use community engagement and transparent metrics when making decisions about proposed infrastructure investments. It also encourages post-project assessments and the use of existing resources to evaluate the positive and unexpected consequences of past infrastructure projects. Measuring the Benefits and Burdens of Infrastructure in Disadvantaged Communities is available here. ABOUT THE AMERICAN SOCIETY OF CIVIL ENGINEERS Founded in 1852, the American Society of Civil Engineers represents more than 150,000 civil engineers worldwide and is America's oldest national engineering society. ASCE works to raise awareness of the need to maintain and modernize the nation's infrastructure using sustainable and resilient practices, advocates for increasing and optimizing investment in infrastructure, and improve engineering knowledge and competency. For more information, visit www.asce.org or www.infrastructurereportcard.org and follow us on Twitter, @ASCETweets and @ASCEGovRel. Read the court decision
Read the full story...
Reprinted courtesy of

The World’s Largest 3D-Printed Neighborhood Is Here

March 20, 2023 — Todd Woody - Bloomberg
Amid the tech boom-fueled sprawl in Austin, Texas, Wolf Ranch at first appears to be another colorfully named but architecturally unimaginative suburban subdivision. Until, that is, you turn a corner and stumble across giant robots building homes resembling waves frozen in concrete. This 100-house addition to the 2,500 homes planned for Wolf Ranch is called “the Genesis Collection,” and as the world’s largest 3D-printed community, it is indeed sui generis. A collaboration between Lennar Corp., the US’s second-biggest home builder, and 3D-printing startup Icon, Genesis represents perhaps the most significant innovation in residential construction in decades. If it can scale, 3D-printed construction promises to deliver energy-efficient homes that can be built faster and more affordably, in novel designs and with minimal waste. The concrete structures are also more resilient to increasingly intense climate-driven hurricanes, wildfires and heat waves. “I think we'll look back and say this was a pretty pivotal moment in the history of construction,” says Jason Ballard, Icon’s cowboy hat-wearing co-founder and chief executive officer. “I do think 3D printing and robotic construction are necessary to end the global housing crisis.” Read the court decision
Read the full story...
Reprinted courtesy of Todd Woody, Bloomberg

White and Williams Elects Four Lawyers to Partnership, Promotes Six Associates to Counsel

January 13, 2017 — White and Williams LLP
White and Williams is pleased to announce the election of Edward Beitz, Justin Fortescue, Jennifer Santangelo and Amy Vulpio to the partnership and the promotion of Paul Briganti, Joshua Galante, Dana Spring Monzo, George Morrison, Craig O’Neill and Steven Urgo from associate to counsel. The newly elected partners and promoted counsel represent the wide array of practices that White and Williams offers its clients, including bankruptcy, corporate, finance, healthcare, insurance coverage, labor and employment, real estate and reinsurance. These lawyers have earned their elevations based on their contributions to the firm and their practices. “We are thrilled to elect these four lawyers to the partnership and promote six associates to counsel. These promotions are representative of the breadth of services and deep bench that we have to offer at White and Williams,” said Patti Santelle, Managing Partner. “The election of our new partners and promotion of our counsel is a reflection of their success and dedication as well as the continued health of the firm.” Read the court decision
Read the full story...
Reprinted courtesy of White and Williams LLP

Harvey's Aftermath Will Rattle Construction Supply Chain, Economists Say

September 07, 2017 — Tim Grogan - Engineering News-Record
Hurricane Harvey’s immediate impact on the construction sector will be a disruption in the supply chain for key materials, along with scheduling problems for projects that were under construction. As the cleanup and eventual rebuilding proceed, increased demand for materials and labor will push costs upward and contractors will be scrambling to secure supplies and workers. Read the court decision
Read the full story...
Reprinted courtesy of Tim Grogan, ENR
ENR may be contacted at ENR.com@bnpmedia.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES