Cambridge Massachusetts Building Expert Directory

South Carolina Legislature Redefining Occurrences to Include Construction Defects in CGL Policies

April 01, 2011 — Beverley BevenFlorez CDJ STAFF

The question of what circumstances must be in place for construction defects to be covered in a general commercial liability (CGL) policies is being raised by the courts and the legislature in South Carolina. The Insurance Journal reports that the American Insurance Association as well as the Property and Casualty Insurers Association of America are speaking out on the issue.

The problem seems to be centered on what defines an “occurrence.” CGL policies were not meant to cover faulty workmanship, according to the filing by the South Carolina Supreme Court. In January of this year, the South Carolina Supreme Court reversed the ruling in Crossmann Communities v Harleysville Mutual declaring that “Respondents cannot show the damage here was the result of an occurrence. Rather, the damage was a direct result and the natural and expected consequence of faulty workmanship; faulty workmanship did not cause an occurrence resulting in damage.” They focused their attention on the word “accident,” stating that there is a fortuity element that is not diminished.

The South Carolina legislature reacted by producing a bill that would add new language directly negating the ruling by the Supreme Court. The South Carolina bill S-431 would change the definition of an occurrence in regards to construction defects as follows: “For a liability insurance policy issued to a construction professional, an ‘occurrence’ means, at a minimum: (1) an accident; or (2) continuous or repeated exposure to substantially the same general harmful condition or substance. No additional requirement of a fortuitous event is needed to constitute an ‘occurrence.’”

S-431 is currently residing in the House Committee on Labor, Commerce and Industry.

Read the full story...

Read the court decision
Read the full story...
Reprinted courtesy of

COVID-19 and Mutual Responsibility Clauses

June 01, 2020 — Joseph M. Leone - ConsensusDocs
As everyone knows, there is a tremendous amount of uncertainty in the construction industry due to the COVID-19 pandemic. Schedules, productivity, safety processes, and seemingly everything else are being affected. In these difficult times, most contractors are making every effort to work together to solve the problems caused by COVID-19. But what happens when differences arise between project owners, contractors, and subcontractors as to the effect of COVID-19 on a project? One party may want to continue pushing the schedule, others may want to slow down, or, more likely, not be able to keep up with the original schedule because of some reason related to COVID-19. As between a prime contractor and a subcontractor, a mutual responsibility clause can provide some clarity or, unfortunately, depending on how the subcontract is written, confusion. Almost all subcontracts have a clause which flows down the prime contractor’s obligations on a project to the subcontractor as applicable to the subcontractor’s work. Known as “flow-down” clauses, this clause works in one direction; obligations of the prime contractor “flow-down” to the Subcontractor. A mutual responsibility clause, in essence, works in both directions. The subcontractor is required to perform its obligations consistent with the prime contractor’s obligations to the owner and the subcontractor is granted the same rights against the prime contractor which the prime contractor has against the owner. Obligations flow down and rights flow up. The rights and obligations flowing through the prime contractor include, the obligation to perform the work in accordance with the plans and specifications, the obligation to meet the schedule constraints in the prime agreement, and the right to extensions of time and change orders to the extent the prime contractor obtains the same. Read the court decision
Read the full story...
Reprinted courtesy of Joseph M. Leone, Drewry Simmons Vornehm, LLP
Mr. Leone may be contacted at jleone@dsvlaw.com

Homebuilding Design Goes 3D

June 17, 2015 — Beverley BevenFlorez-CDJ STAFF
The Houston Business Journal reported that some home builders are using new computer visualization technology to create 3D representations of home designs. Autodesk Revit not only helps the buyer visualize the home, but it also catches architectural design mistakes and can help homebuilders quantify all of the building materials necessary for a particular model. Mollie Silver, a senior designer with On Point Custom Homes, uses Autodesk Revit. “It changes the game for our clients, because this gives them a really good idea of what their home will look like in real life,” Silver told the Houston Business Journal. “If you give them floor plans, it just doesn’t give them the same idea.” Read the court decision
Read the full story...
Reprinted courtesy of

Float-In of MassDOT Span Sails, But Delay Dispute Lingers

December 08, 2016 — Johanna Knapschaefer – Engineering News-Record
The Massachusetts Dept. of Transportation and a contracting team are in discussions regarding fabrication issues that caused a two-year delay in the completion of a key crossing between Quincy and Weymouth. The full completion of the $244-million Fore River Bridge replacement, originally slated for Jan. 5, 2017, is now projected for February 2019. Read the court decision
Read the full story...
Reprinted courtesy of Johanna Knapschaefer, Engineering News-Record
ENR may be contacted at enr.com@bnpmedia.com

Hawaii Appellate Court Finds Duty to Defend Group Builders Case

May 10, 2013 — Tred Eyerly
On May 19, 2010, the Hawaii Intermediate Court of Appeals determined construction defect claims did not constitute an occurrence under a CGL policy.Group Builders, Inc. v. Admiral Ins. Co., 123 Haw. 142, 231 P.3d 67 (Haw. Ct. App. 2010) ("Group Builders I"). The appeal in Group Builders I, however, only addressed the duty to indemnify. The ICA has now issued a second decision (unpublished), holding that there is was duty to defend Group Builders on the construction defect claims under Hawaii law, based upon the policy language and the allegations in the underlying complaint. Group Builders, Inc. v. Admiral Ins. Co., 2013 Haw.App. LEXIS 207 (Haw. Ct. App. April 15, 2013). The underlying suit involved allegations by Hilton Hotels Corp. that Group Builders, a subcontractor working on an addition to the hotel, was responsible for mold found after completion of the project. Hilton alleged that the "design, construction, installation, and/or selection of the . . . building exterior wall finish . . . did not provide an adequate air and/or moisture barriers." The counts alleged against Group Builders included breach of contract and negligence. Read the court decision
Read the full story...
Reprinted courtesy of Tred Eyerly
Mr. Eyerly can be contacted at te@hawaiilawyer.com

Is Settling a Bond Claim in the Face of a Seemingly Clear Statute of Limitations Defense Bad Faith?

October 11, 2021 — Christopher G. Hill - Construction Law Musings
We have often discussed payment and performance bonds here at Construction Law Musings, most often in the context of payment bond claims relating to federal and state-owned. construction projects. A late 2020 case out of the Eastern District of Virginia federal court examined what happens after such a claim, in this case, based upon a developer’s subdivision bonds, is made and negotiations commence between the surety and the claimant. Specifically, Fidelity & Deposit Co. of Maryland v. Ransgate Corp., et. al. looked at claims for indemnity by a surety and the principal/indemnitors in the event that the Surety settled such a claim. In the Ramsgate case, Surety provided two separate subdivision subcontract bonds to Ramsgate. Pursuant to those bonds and the indemnity clause of its indemnity agreement, the Surety sought reimbursement of its $80,000.00 settlement payment to the local building authority that it paid to resolve what was originally a claim for over $420,000.00 by the City. The project was started in 2002 and after many years of failures to complete (according to the City of Suffolk), the City made its claim for expenses in 2017. Ramsgate claimed that it completed the subdivisions in 2003. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Building Codes Evolve With High Wind Events

November 14, 2018 — William L. Coulbourne - Construction Executive
Designs for wind loads have been in building codes for a long time. Prior to the creation of the International Building Code, the three primary legacy codes had wind load provisions but they mostly dealt with wind loads on the building frame and had little load information about the building components or the exterior cladding. Since Hurricane Andrew in 1992, building codes include more wind design information that comes from disaster investigations and wind engineering research conducted primarily at the university level. In 2000, the legacy building codes were replaced with the International Building Code (IBC). Residential buildings must comply with the International Residential Code (IRC). Both of these building code documents reference the engineering load standard, ASCE 7 Minimum Design Loads and Other Criteria for Buildings and Other Structures. This load standard has also been in existence for a long time; it now is revised every six years and the building codes revised every three years (IBC and IRC) reference ASCE 7 so the provisions in ASCE 7 become part of the building code requirements. Reprinted courtesy of William L. Coulbourne, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Todd Seelman Recognized as Fellow of Wisconsin Law Foundation

February 15, 2021 — Todd Seelman - Lewis Brisbois Newsroom
Denver Managing Partner Todd R. Seelman has been recognized as a Fellow of the Wisconsin Law Foundation, joining a select group of attorneys who comprise no more than 2.5% of the entire membership of the Wisconsin Bar. Mr. Seelman's membership in the Fellows organization represents that his peers have recognized him for his outstanding professional achievements and devotion to the welfare of his community, state, and country, as well as the advancement of the legal profession. “I am grateful for this honor and opportunity to become a member of an exceptional group of lawyers," Mr. Seelman said. "I look forward to working to advance the Fellows’ important goals, including promoting justice and improving legal education. The Fellows organization was created to honor members of the Wisconsin Bar who have achieved significant professional accomplishments and contributed leadership and service to their communities. Read the court decision
Read the full story...
Reprinted courtesy of Todd Seelman, Lewis Brisbois
Mr. Seelman may be contacted at Todd.Seelman@lewisbrisbois.com

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES