Fairfield Connecticut Building Expert Directory

The Road to Hell is Paved with Good Intentions: A.B. 1701’s Requirement that General Contractors Pay Subcontractor Employee Wages Will Do More Harm Than Good

November 02, 2017 — Steven M. Cvitanovic & Omar Parra - Haight Brown & Bonesteel LLP
Tales of subcontractors who close up shop before paying their employees are not all that uncommon, but they are certainly not common enough to require General Contractors to pay for that same labor twice. Last month, the California Legislature passed Assembly Bill No. 1701, which requires the General Contractor of a private construction project to pay all unpaid wages and fringe benefits owed to an employee of a subcontractor, irrespective of the tier, and even if the General Contractor made the payment. With the Governor’s recent signature, Assembly Bill No. 1701 is now the law of the land. Here is what you need to know:

It applies to all private (but not public) construction contracts entered into on or after January 1, 2018;
It gives a subcontractor’s employee a direct cause of action against the General Contractor for any unpaid wages and fringe benefits, even if the General Contractor has fully paid the subcontractor;
It gives a third party owed fringe or other benefits a cause of action against the General Contractor;
All actions by the employee or third party must be filed within one year of the earliest of the recordation of the notice of completion, the recordation of the notice of cessation of work, or the actual completion of the work;
The General Contractor cannot contract to avoid the liability imposed by Assembly Bill No. 1701, but it can seek indemnity from the subcontractor; and
At the General Contractor’s request, the subcontractor shall provide the General Contractor with its payroll records.

Reprinted courtesy of Steven Cvitanovic, Haight Brown & Bonesteel LLP and Omar Parra, Haight Brown & Bonesteel LLP Mr. Cvitanovic may be contacted at scvitanovic@hbblaw.com Mr. Parra may be contacted at oparra@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

ABC Safety Report: Construction Companies Can Be Nearly 6 Times Safer Than the Industry Average Through Best Practices

May 06, 2024 — Associated Builders and Contractors
WASHINGTON, April 30, 2024 (GLOBE NEWSWIRE) -- Associated Builders and Contractors today announced the findings from its 2024 Safety Performance Report, an annual guide to construction jobsite health and safety best practices. The report is unveiled to coincide with Construction Safety Week, May 6-10. The annual safety report also provides a comprehensive understanding of the impact of deploying ABC's STEP Safety Management System, which enables top-performing ABC members to achieve incident rates 576% safer than the U.S. Bureau of Labor Statistics construction industry average. Established in 1989, STEP provides contractors and suppliers with a robust, no-cost framework for measuring safety data and benchmarking with peers in the industry. ABC's research on more than 900 million work hours completed by participants in the construction, heavy construction, civil engineering and specialty trades in 2023 identified the following foundations of industry-leading safety best practices:

Top management engagement: Employer involvement at the highest level of company management produces a 54% reduction in total recordable incident rates, or TRIR, and a 52% reduction in days away, restricted or transferred rates, or DART rates.
Substance abuse prevention programs: Robust substance abuse prevention programs/policies with provisions for drug and alcohol testing where permitted lead to a 47% reduction in TRIR and a 48% reduction in DART rates.
New hire safety orientation: Companies that conduct an in-depth indoctrination of new employees into the safety culture, systems and processes based on a documented orientation process experience incident rates that are 45% lower than companies that limit their orientations to basic health and safety compliance topics.
Frequency of toolbox talks: Companies that conduct daily, 15-to-30-minute toolbox talks reduce TRIR and DART rates by 81% compared to companies that hold them monthly.

The 2024 ABC Safety Performance Report is based on submissions of unique company data gathered from members that deployed during the 2023 STEP term, Jan. 15-Dec. 15. ABC collects each company's trailing indicator data as reported on its annual Occupational Safety and Health Administration Form 300A ("Summary of Work-Related Injuries and Illnesses") and its self-assessment of leading indicator practices from its STEP application. Each data point collected is sorted using statistically valid methodology developed by the BLS for its annual Occupational Injuries and Illnesses Survey and then combined to produce analyses of STEP member performance against BLS industry average incident rates. The report demonstrates that applying industry-leading processes dramatically improves health and safety performance among participants regardless of company size or type of work. Any company can participate in STEP. Visit abc.org/step to begin or continue your safety journey. Read the court decision
Read the full story...
Reprinted courtesy of

Contract’s Definition of “Substantial Completion” Does Not Apply to Third Party for Purposes of SOL, Holds Court of Appeal

June 15, 2020 — Garret Murai - California Construction Law Blog
Those of you in the construction industry know that the two primary statutes of limitation are the 4-year year statute of limitations for patent defects and 10-year statute of limitations for latent defects. Both statutes begin to run on “substantial completion.” In Hensel Phelps Construction Co. v. Superior Court of San Diego, Case No. D076264 (January 22, 2020), the 4th District Court of Appeal examined whether the term “substantial completion,” as used in Civil Code section 941, which applies to residential construction, can be defined by the parties’ contract and applied to third-parties. The Hensel Phelps Case Hensel Phelps Construction Co. entered into a prime construction contract with the owner and developer of a mixed-use project in San Diego. Hensel Phelps was the general contractor on the project. The project included a residential condominium tower which would eventually be managed and maintained by Smart Corner Owners Association. Smart Corners was not a party to the contract. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

Bright-Line Changes: Prompt Payment Act Trends

September 16, 2024 — Stephanie L. Cooksey - Peckar & Abramson, P.C.
Untimely payment by the owner for contract work and additional work on construction projects can place an unfair financial burden on contractors and subcontractors. Most states have attempted to eliminate or mitigate this inequity in construction contracting through Prompt Payment Acts that govern payment deadlines and provide remedies for untimely payment. This article addresses the legislative trends aimed at minimizing the risk of non-payment, overdue payment, and withholding retainage in favor of downstream parties to a construction contract. Fortifying Contractor Protections with “Bright-Line” Language Over the last decade, states have been tightening prompt payment laws by replacing broad, general statutory language with bright-line rules. What is a bright-line rule? A specific or definite figure, a quantifiable marker—i.e., something owners, contractors, subcontractors, and suppliers should be aware of. Practically speaking, the more bright-line a prompt payment statute is, the greater the likelihood it will affect a construction project in your state. A standard form construction contract, if not reviewed carefully, can create conflicts or confusion if it gives a party more leeway on payment deadlines than the applicable Prompt Payment Act. For example, consider an owner-issued Construction Change Directive (“CCD”) that requires a contractor to commence additional work immediately while a formal change order is negotiated. Consequently, a CCD can push financial burdens downstream, whether inadvertently or not, and may conflict with statutory payment deadlines. Nevertheless, an owner can be justified in its utilization of a CCD to maintain the project schedule. How should the parties competing interests be resolved? Read the court decision
Read the full story...
Reprinted courtesy of Peckar & Abramson, P.C.

Inspectors Hurry to Make Sure Welds Are Right before Bay Bridge Opening

August 27, 2013 — CDJ STAFF
Each of the 20 welds at the base of the tower of the Bay Bridge took more than four hours to complete, with the lengthy welds forming at one-and-a-half inches per minute. They’ve been finished for two years now, but inspectors are just now checking the welds for defects. Any defects found will have to be removed and repaired. Mazen Wahbeh, an engineer on the project, assumes that less than 5 percent of the total welded area will have to be repaired. According to Wahbeh, the bridge can open before the welds are thoroughly checked and repaired, and so “the contractor is prioritizing the remaining work.” Read the court decision
Read the full story...
Reprinted courtesy of

Designing a Fair Standard of Care in Design Agreements

February 21, 2022 — ConsensusDocs
One of the concerns faced by construction companies is now design liability. Design liability concerns are not limited to just design-build projects. It is a hot-button issue for builders because the line between an architect’s responsibility to create sufficient design documents and a builder’s responsibility to execute the means, methods, and techniques is increasingly blurry. Problems arise when owners, design professionals, and builders point fingers, rather than truly collaborate, and communicate. While construction technologies used to assemble complex systems within buildings are increasingly sophisticated, such sophistication is unfortunately not matched with increased information sharing and effective communication. Another reason for growing design liability is unclear and inadequate specifications. Too often projects rush as well as shortchange design budgets. And some projects use hybrid prescriptive and performance specifications. This hybrid approach often confuses and obfuscates rather than clarifies design requirements. Read the court decision
Read the full story...
Reprinted courtesy of ConsensusDocs

Super Lawyers Selects Haight Lawyers for Its 2023 California Rising Stars List

June 12, 2023 — Haight Brown & Bonesteel LLP
Congratulations to Patrick McIntyre, Kathleen Moriarty and Kristian Moriarty who have been selected to the 2023 California Rising Stars list. Each year, no more than 2.5 percent of the lawyers in the state are selected by the research team at Super Lawyers to receive this honor. Super Lawyers, part of Thomson Reuters, is a rating service of outstanding lawyers from more than 70 practice areas who have attained a high degree of peer recognition and professional achievement. The annual selections are made using a patented multiphase process that includes a statewide survey of lawyers, an independent research evaluation of candidates and peer reviews by practice area. The result is a credible, comprehensive and diverse listing of exceptional attorneys. The Super Lawyers lists are published nationwide in Super Lawyers magazines and in leading city and regional magazines and newspapers across the country. Super Lawyers magazines also feature editorial profiles of attorneys who embody excellence in the practice of law. Read the court decision
Read the full story...
Reprinted courtesy of Haight Brown & Bonesteel LLP

Scientists Are Trying to Make California Forests More Fire Resilient

June 21, 2021 — Laura Bliss - Bloomberg
To the untrained eye, the scrubby slope off Wentworth Springs Road in the Eldorado National Forest looks like any other patch of Sierra Nevada ridgetop. Tufted in native shrubs and flecked by darkened pine stumps, it’s part of a 30,000-acre swath of land that was deforested in 2014, when the King Fire tore through 17 miles of canyon in less than six hours. But Dana Walsh can see what’s unique. On a recent Sunday morning, the USDA Forest Service forester bent over a white flag pinned into the ground to mark a barely-visible seedling. As she points to other seemingly camouflaged baby conifers nearby, what starts to emerge is a subtle pattern she calls cluster planting. “It’s tough to make out unless you know to look for it,” she said. “But once you see a tree, then you can spot the five or six planted near it. Then there’s nothing. Then there’s another five or six. Then there’s nothing.” Read the court decision
Read the full story...
Reprinted courtesy of Laura Bliss, Bloomberg

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES