The Expansion of Potential Liability of Construction Managers and Consultants
November 18, 2019 —
Scott D. Cessar - Construction ExecutiveOver the last decade or so, there has been far more judicial willingness to adopt legal theories that result in an increased risk of exposure to construction managers and consultants working on construction projects. This has resulted in a greater likelihood of lawsuits being filed that name construction managers and consultants as defendants and a greater likelihood of those lawsuits surviving efforts to have the lawsuits dismissed prior to trial. The consequence of more claims has led to increased costs for legal expenses, settlements and uncompensated personnel time devoted to the defense of the claims.
This expansion of potential liability may be broken into two sets:
- claims for pure economic loss not arising from property damage or personal injury by parties not in a contractual relationship with a construction manager or consultant; and
- claims for property damage or personal injury by a party not in a contractual relationship with a construction manager or consultant.
The first set concerns claims by a contractor against a construction manager or consultant that its breach of duties owed to the owner on a project and/or its provision of incomplete or inaccurate information on a project, which it knew, or should have reasonably anticipated, would be relied on by the contractor, resulted in damages to the contractor.
Reprinted courtesy of
Scott D. Cessar, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Cessar may be contacted at
scessar@eckertseamans.com
9 Basic Strategies for Pursuing Coverage for Construction Accident Claims
September 05, 2022 —
William S. Bennett - Saxe Doernberger & Vita, P.C.Construction accidents happen all the time. Accidents involving worker injuries or damage to property can shut down a job site and cause significant losses. Contractors should be diligent and aggressive in examining all of the available options for recovery under their different insurance policies and bonds. This article will provide a refresher on some basic tips to help policyholders improve claims practices with respect to construction accidents.
1. Identify relevant insurance policies:
Identifying what policies exist that might cover the loss can sometimes be easier said than done. Construction accidents come in many different forms and can involve many different parties who suffer various types of losses. The general contractor, owner, subcontractors, and vendors could all be involved or affected in some way. Each of these parties has its own insurance coverage and will have promised each other various forms of risk transfer through those policies and through their contracts.
Read the court decisionRead the full story...Reprinted courtesy of
William S. Bennett, Saxe Doernberger & Vita, P.C.Mr. Bennett may be contacted at
wsb@sdvlaw.com
Automating Your Home? There’s an App for That
April 03, 2013 —
CDJ STAFFWriting in the New York Times, Nick Wingfield looks at both the promise and failures of home automation, starting with a timer which had “buttons the size of a small seed” and was too difficult to reset. Wingfield said the timer “made my house dumber.”
He moves on to the useful items, such as the Nest thermostat, which improves on his previous programmable thermostat by being able to determine when people are actually home (so an empty house isn’t being heated) and it can be controlled from a smartphone app, useful for the taxi on the way home from the airport. The Belkin WeMo Switch allows users to control lamps from an iOS app and the timer functions can be accessed without having to use seed-sized buttons.
For those with bigger home automation budgets, there are now companies setting up whole house systems, including thermostat, light controls, motion detectors, surveillance cameras, and even monitors for your hot water heater and the level of carbon monoxide in your home. These systems start at around $1,500 but quickly go past $5,000. Other packages are sold on a month-by-month basis. And they include apps.
Read the court decisionRead the full story...Reprinted courtesy of
Monumental Museum Makeover Comes In For Landing
May 28, 2024 —
Jim Parsons - Engineering News-RecordAfter more than 40 years of chronicling the nation’s storied exploration of the sky and heavens, the Smithsonian Institution’s National Air and Space Museum in Washington, D.C., was, in a word, tired.
Reprinted courtesy of
Jim Parsons, Engineering News-Record
ENR may be contacted at enr@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
Candis Jones Named to Atlanta Magazine’s 2022 “Atlanta 500” List
February 14, 2022 —
Candis Jones - Lewis Brisbois NewsroomAtlanta, Ga. (February 11, 2022) - Atlanta Partner Candis R. Jones has been named to Atlanta Magazine’s 2022 “Atlanta 500” list of the most powerful business leaders in Atlanta. This is the second year in a row she has received this recognition.
To compile this list, the publication reviewed nominations from the public and consulted experts across various sectors. The magazine’s editors and writers considered not only the status of the nominees within their respective organizations, but also whether the nominees were visionary by, for example, leading programs for their communities or creating opportunities for employees.
Read the court decisionRead the full story...Reprinted courtesy of
Candis Jones, Lewis BrisboisMs. Jones may be contacted at
Candis.Jones@lewisbrisbois.com
The Ghosts of Tariffs Past May Help Us in the Future
January 07, 2025 —
Kellie Ros - ConsensusDocsThe havoc material tariffs have caused the construction industry is nothing new. President-Elect Donald Trump imposed heavy tariffs on steel and aluminum in his first administration in 2016. While the tariffs themselves were not wholly unexpected, the ripple effect of those tariffs (coupled with the impacts of the COVID-19 pandemic) caused unexpected challenges for the construction industry. Those included allocating the risk of the additional costs caused by tariffs, supply and demand issues, grappling with escalation clauses, and navigating fixed price projects. The industry must now utilize the lessons learned from the rear-view mirror to strategically prepare for what was promised to be a second round of tariffs come January 2025.
Tariffs’ Impacts on Material Prices Everywhere
New or increased tariffs have the potential to raise prices for a wide range of construction inputs. Based on simple supply and demand principles, this includes inputs produced domestically that compete with foreign imports. For example, if a 20% tariff is imposed on Chinese steel, contractors may look to procure Brazil or U.S. steel in an effort to cut their costs. Such a rush to those less-costly alternatives may result in a supply shortage or an increase in prices in the marketplace across the globe. This occurred in 2016 when material prices indirectly related to the inputs on which the tariffs were imposed even increased. Contractors may be well served to get ahead of anticipated price increases and purchase materials now or take other actions in negotiating contracts to protect themselves.
Read the court decisionRead the full story...Reprinted courtesy of
Kellie Ros, Peckar & Abramson, P.C.Ms. Ros may be contacted at
kros@pecklaw.com
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Mediation is (Almost) Always Worth a Shot
October 17, 2022 —
Christopher G. Hill - Construction Law MusingsAs Hurricane Ian is bearing down on Florida the economy is sputtering, it is easy to lose track of things that construction professionals (among others) can control. One of those things is how to resolve your construction dispute. When initial, and hopefully business-oriented, discussions break down and the construction lawyers get involved, often more formal means are required. One “formal” possibility that should always be considered and almost always attempted is the mediation of your dispute.
I know, I pound this particular gavel often. Why? Because not only are litigation and arbitration expensive and time-draining, you are putting your fate in the hands of a judge or arbitrator to decide. Let’s face it, most contractors (and solo construction lawyers for that matter) want as much control over their businesses and projects as possible. Mediation is the only third-party dispute resolution process that allows the parties to decide their own mutual fate. This is one of the primary reasons I almost always recommend that my clients try mediation before or after filing their lawsuit or arbitration demand.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
