New York’s Highest Court Reverses Lower Court Ruling That Imposed Erroneous Timeliness Requirement For Disclaimers of Coverage
June 18, 2014 —
Robert F. Walsh and Paul A. Briganti – White and Williams LLPOn June 10, 2014, the New York Court of Appeals (the state’s highest court) issued a unanimous decision in KeySpan Gas East Corp. v. Munich Reinsurance America, Inc. (No. 110, June 10, 2014), reversing a lower court decision which had erroneously imposed on insurers a duty to disclaim coverage for property damage claims as soon as possible or risk waiving their coverage defenses. White and Williams represented one of the insurance company defendants in the action.
The case involved an action against three excess insurers for insurance coverage for underlying environmental claims arising from Manufactured Gas Plant sites. Upon receiving notice of the underlying claims, the three insurers reserved their rights to deny coverage on various grounds, including late notice of an occurrence, pending an investigation. The insurers ultimately denied coverage on the basis of late notice several years later based on information developed in discovery in the litigation. The policyholder/plaintiff KeySpan argued that the insurers had unreasonably delayed in issuing their disclaimers and that there was a triable issue of fact on whether such a delay amounted to a waiver of the late notice defense.
Reprinted courtesy of
Robert F. Walsh, White and Williams LLP and
Paul A. Briganti, White and Williams LLP
Mr. Walsh may be contacted at walshr@whiteandwilliams.com; Mr. Briganti may be contacted at brigantip@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
How You Plead Allegations to Trigger Liability Insurer’s Duties Is Critical
November 01, 2021 —
David Adelstein - Florida Construction Legal UpdatesHow you plead allegations in your lawsuit to trigger duties of a liability insurance carrier is a critical consideration. If the complaint is not pled appropriately, it can result in the carrier NOT owing a duty to defend its insured, which is the party(ies) you are suing. If there is no duty to defend, there will be no duty to indemnify the insured to cover your damages. For this reason, in a number of circumstances, this is NOT what you want because you want to trigger insurance coverage and potential proceeds to be paid by a carrier to cover your damages. There are times when you are confronted with a case that just is not a good insurance coverage case. This may result in you coming up with creative arguments to maximize insurance coverage. Even in these times, you want to plead the complaint to best maximize coverage under the creative arguments you have developed.
An example of not pleading allegations in a complaint to trigger an insurer’s duties can be found in the Eleventh Circuit Court of Appeal’s decision in Tricon Development of Brevard, Inc. v. Nautilus Insurance Co., 2021 WL 4129373 (11th Cir. 2021). This case involved a general contractor constructing condominiums. The general contractor hired a subcontractor to fabricate and install metal railings. The subcontractor had a commercial general liability (CGL) policy that named the general contractor as an additional insured with respect to liability for property damage “caused in whole or in part” by the subcontractor’s direct or vicarious acts or omissions. (This is a good additional insured endorsement.)
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
Construction Defects in Home a Breach of Contract
September 09, 2011 —
CDJ STAFFThe Supreme Court of North Dakota has ruled in Leno v. K & L Homes, affirming the verdict of the lower court. K & L Homes argued that district court had erred in several ways, including by refusing to instruct the jury on comparative fault, denying a request for inspection, and not allowing a defendant to testify on his observations during jury viewing.
The Lenos purchased a home constructed by K & L Homes, after which they alleged they found cracks, unevenness, and shifting, which they attributed to improper construction. They claimed negligence on the part of K & L Homes. K & L Homes responded that the Lenos were responsible for damage to the home. The Lenos dropped their negligence claim, arguing breach of contract and implied warranties.
Before the trial, after the discovery period had passed, K & L Homes requested to inspect the home. This was rejected by the court. Kelly Moldenhauer, the owner of K & L Homes sought to testify about his observations during the jury’s viewing of the house. The court denied this too. The jury found that K & L was in breach of contract and awarded damages to the Lenos.
The North Dakota Supreme Court noted that K & L Homes gave “warranties that the home had been built according to local building codes and laws, and that the house was fit for its particular purpose as a residence.” The court found that a defective home breached this warranty. Further, the home violated an implied warranty of fitness.
The district court had denied K & L’s request to inspect the home, as the discovery period had ended and it would not give the Lenos time to do further discovery of their own. At the time of the request, there was only twenty-two days before the trial. The Supreme Court ruled that this was not an abuse of discretion of the part of the district court.
The Lenos had requested that Moldenhauer’s testimony not be permitted, as it would “have the same effect as if the court had granted K & L Homes’ pretrial request for inspection.” K & L Homes agreed to this in court, replying, “okay.”
The decision affirms the judgment of the district court and the damages awarded to the Lenos by the jury.
Read the court’s decision…
Read the court decisionRead the full story...Reprinted courtesy of
Expert's Opinions On Causation Leads Way To Summary Judgment For Insurer
August 10, 2017 —
Tred R. Eyerly - Insurance Law HawaiiAlthough the insured claimed damages to her home was caused by vibrations from nearby construction, the court held she failed to overcome the insurer's expert's opinion that the damage resulted from excluded causes such as wear and tear, cracking and settling. King v. Am Family Ins., 2017 Ohio App. LEXIS 2565 (Ohio Ct. App. June 26, 2017).
The insured had a homeowners policy with American Family. The insured sued American Family, alleging that damage to her home was caused by vibrations caused by construction equipment at a nearby high school. The damage included cracks, leaks and mold.
American Family moved for summary judgment, attaching an affidavit from a structural engineering consulting firm. The report outlined alleged damages, including cracks throughout the house, and opined that the areas of concern had been present and progressing for years. Some damaged areas were discolored and patched. Accordingly, the report concluded that the damages were not caused by vibrations from construction.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly - Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
What Lies Beneath
April 10, 2023 —
Grace Austin - Construction ExecutiveIndustry experts call it the “Wild Wild West,” and it certainly could be considered a new frontier: private utility locating. While public utility locating is familiar territory, private utility locating is decidedly newer—and already changing rapidly. Public or private, utility location is imperative to safe and cost-effective construction. Hidden utilities can lead to damage, driving up costs and causing unexpected project delays. They can also be dangerous to both workers and the public, causing injuries and even deaths.
The Common Ground Alliance’s 2021 DIRT Report—which compiles information from CGA’s Damage Information Reporting Tool program—found that natural gas and telecommunications were the leading utilities damaged. DIRT received more than 230,000 reports on damages and near-misses in 2021. Clearly, the industry can do better.
CALL BEFORE YOU DIG
Utility location mapping in the United States began in earnest in the mid-20th century, according to GPRS, a private utility-mapping company that was founded in 2001. As postwar development shifted into high gear, the utility industries realized that power, water, gas, phone and other utilities were now being installed in the ground—and there needed to be a better system to prevent service disruptions and accidents.
Reprinted courtesy of
Grace Austin, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Visual Construction Diaries – Interview with Jeff Sassinsky of Fovea Aero
November 30, 2017 —
Aarni Heiskanen - AEC BusinessJeff Sassinsky, President of Fovea Aero, gave me a live demonstration on Fovea Aero Vision – an app that allows you to a get a fully immersive visual construction diary of your project.
The idea for the development of Fovea Aero Vision came from discussions with general contractors, owners, and other construction industry professionals. They were talking about the use of smartphones, particularly phone cameras, in construction. The photos, for example, of a fitting that does not look right end up in a folder on a server or goes back and forth in email messages. “The lack of any structure behind both the collection and the storage and sharing of the photos is hampering their usage,” Jeff said. “We wanted to solve the problem by creating a full record of everything that takes place on a construction site, on a regular basis, sharing it among the stakeholders, and making it super easy to use.”
Read the court decisionRead the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
info@aepartners.fi
Good Signs for Housing Market in 2013
December 20, 2012 —
CDJ STAFFDan Green, a loan officer at Waterstone Mortgage, is optimistic about the construction market in 2013. He notes that the rise in building permit, housing starts, and housing completions are all good signs. Mortgage rates are still low, making these new homes attractive to buyers.
Read the court decisionRead the full story...Reprinted courtesy of
