Deck Police - The New Mandate for HOA's Takes Safety to the Next Level
November 18, 2019 —
Joseph Ferrentino – Newmeyer DillionA recent California law will hold homeowners’ associations accountable for the safety of their decks. SB326 now mandates all homeowners' associations to have decks inspected at least once every nine years by an architect or structural engineer to determine whether the decks are safe and waterproof. This law (Civil Code section 5551) follows SB721 which was passed in 2018 and requires a similar inspection every six years for other multifamily dwelling units. Failure to comply can result in paying the enforcement costs of local building agencies.
DETAILS ON THE MANDATE:
More specifically, the 2019 law requires inspections of wood “decks, balconies, stairways, and their railings” more than six feet off of the ground and designed for human use. Additionally, the engineer or architect must (1) certify that he or she has inspected for safety and waterproofing, and (2) certify the remaining useful life of the system. Further, the inspector must inspect a random sample of enough units to provide 95% confidence that “the results are reflective of the whole.” In other words, in addition to the inspector, the association will have to hire a statistician.
The nine-year timetable for inspection is no coincidence. After all, the statute of limitations for construction defects is ten years. In fact, associations are required to give notice to their members before filing a suit against a builder. However, under the new law, the association can delay giving notice to its members “if the association has reason to believe that the statute of limitations will expire.” Also, recent case law held that builders could add requirements to CC&R’s to limit a board’s authority to file lawsuits – i.e. adding a supermajority vote by members. Under SB326, any such provisions are now void. Hence, “supermajority” voting provisions are now invalid.
IMPACT ON CONSTRUCTION LITIGATION
These recent laws are clearly a reaction to the tragic collapse of an apartment balcony in Berkley in 2015 that resulted in the death of six college students. While it is imperative that decks be structurally safe, the requirements of SB326 will fuel more construction defect litigation.
Joseph Ferrentino is a Partner in Newmeyer Dillion's Newport Beach office. With 25 years of experience, Joe guides clients through construction law issues, among other areas. For more information on how Joe can help, contact him at joe.ferrentino@ndlf.com
ABOUT NEWMEYER DILLION
For 35 years, Newmeyer Dillion has delivered creative and outstanding legal solutions and trial results that align with the business objectives of clients in diverse industries. With over 70 attorneys working as an integrated team to represent clients in all aspects of business, employment, real estate, privacy & data security and insurance law, Newmeyer Dillion delivers tailored legal services to propel clients’ business growth. Headquartered in Newport Beach, California, with offices in Walnut Creek, California and Las Vegas, Nevada, Newmeyer Dillion attorneys are recognized by The Best Lawyers in America©, and Super Lawyers as top tier and some of the best lawyers in California and Nevada, and have been given Martindale-Hubbell Peer Review's AV Preeminent® highest rating. For additional information, call 949.854.7000 or visit www.newmeyerdillion.com
Read the court decisionRead the full story...Reprinted courtesy of
Does Arbitration Apply to Contemporaneously Executed Contracts (When One of the Contracts Does Not Have an Arbitration Provision)?
January 10, 2018 —
David Adelstein - Florida Construction Legal UpdatesBinding arbitration is an alternative to litigation. Instead of having your dispute decided by a judge and/or jury, it is decided by an arbitrator through an arbitration process. Arbitration, however, is a creature of contract, meaning there needs to be a contractual arbitration provision requiring the parties to arbitrate, and not litigate, their dispute. Just like litigation, there are pros and cons to the arbitration process, oftentimes dictated by the specific facts and legal issues in the case.
What happens when a person executes two (or more) contemporaneous contracts, one with an arbitration provision and one without? Are the parties required to arbitrate the dispute arising out of the contract that does not contain the arbitration provision?
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Florida Construction Legal UpdatesMr. Adelstein may be contacted at
dadelstein@gmail.com
CAPSA Changes Now in Effect
November 14, 2018 —
Wally Zimolong - Supplemental ConditionsBack in June, I posted about changes coming to the Pennsylvania Contractor and Subcontractor Payment Act (CAPSA), 73 P.S. Section 501, et. seq. The Act applies to virtually all private construction projects in Pennsylvania. As of last week (Oct. 10), those changes are effective. While there is some argument to the contrary, these changes are NOT retroactive and apply to all projects going forward from that date. To recap, here are some of the important changes you need to be aware of:
- Contractual waivers. Parties cannot waive the applicability of the act through contract. Therefore, any clause in a contract purporting to waive the Payment Act’s applicability is void.
- Suspension of work. Unpaid contractors and subcontractors have always enjoyed a common law right to suspend performance until payment was made. Now, they also have a statutory right to do so. Section 5 of the Payment Act ads a subpart (e) which states that an unpaid contractor or subcontractor can suspend performance without penalty if it is not paid.
Read the court decisionRead the full story...Reprinted courtesy of
Wally Zimolong, Zimolong LLCMr. Zimolong may be contacted at
wally@zimolonglaw.com
Traub Lieberman Attorneys Win Motion for Judgment on the Pleadings In Favor of Insurer
June 26, 2023 —
Jeremy S. Macklin & Danielle K. Kegley - Traub LiebermanTraub Lieberman Partner Jeremy Macklin and Associate Danielle Kegley obtained judgment on the pleadings in favor of Admiral Insurance Company (“Admiral”), in a matter brought before the Chancery Division of the Circuit Court of Cook County, Illinois. In the underlying case, an injured employee sued various companies, and their agents, for injuries he sustained on a construction project. The insureds, one of the defendant companies and its employee, sought coverage for the underlying lawsuit under a professional liability policy issued to that company by Admiral. The policy at issue provided coverage for the company and its employees, for negligent acts or omissions committed in the rendering of “professional services,” defined as services “involving specialized training and skill while in the pursuit of” mechanical and process engineering.
After initially defending the insureds, Admiral filed a declaratory judgment action asking the Court to declare that the company has no duty to defend or indemnify the insureds in the underlying lawsuit and to allow Admiral to immediately withdraw its defense of the insureds. Admiral argued there is no coverage under the professional liability policy, as the underlying lawsuit does not contain allegations that the underlying plaintiff’s injuries arose from the rendering of or failure to render “professional services.” The insureds argued that since they were hired as mechanical and process engineers for the project, that any lawsuits against them must necessarily arise from their “professional services.” Further, the insureds asked the Court to disregard the express allegations in the underlying lawsuit concerning their role on the project as a general contractor.
Reprinted courtesy of
Jeremy S. Macklin, Traub Lieberman and
Danielle K. Kegley, Traub Lieberman
Mr. Macklin may be contacted at jmacklin@tlsslaw.com
Ms. Kegley may be contacted at dkegley@tlsslaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Making Construction Innovation Stick
February 22, 2018 —
Tom Sawyer, Jeff Rubenstone, and Scott Lewis – ENRIntegrating innovations into construction workflows—rather than serially testing, piloting and discarding them—is a definition of success. Yet few innovations—even ones that shine in trials—are absorbed into practice. Many just quietly go away, sending the work of vetting and testing them down the drain. That leaves some firms wondering if most construction technology innovation efforts are a waste of time.
Reprinted courtesy of Engineering News-Record authors
Tom Sawyer,
Jeff Rubenstone and
Scott Lewis
Mr. Sawyer may be contacted at sawyert@enr.com
Mr. Rubenstone may be contacted at rubenstonej@enr.com
Mr. Lewis may be contacted at lewisw@enr.com
Read the court decisionRead the full story...Reprinted courtesy of
Coping With The New Cap And Trade Law
January 04, 2023 —
John P. Ahlers - Ahlers Cressman & SleightOn May 17, 2021, Governor Jay Inslee signed a new carbon pricing bill making Washington only the second in the nation to have such an extensive climate-change reduction policy (Senate Bill 5126).
The Stated Purpose of the New Law:
SB5126 creates a system to cap carbon pollution and greenhouse gas emissions, and individual businesses are provided specific limits on emissions (“Cap”). Those businesses then have to purchase credits for allowed emissions.
The businesses which emit fewer greenhouse gases than the credits allotted them can sell their credits to businesses that are not reducing emissions as quickly (“Trade”). The overall pool of carbon credits are to be gradually reduced by 2050 to hit a goal of net-zero emissions. This bill is colloquially known as the “Cap and Trade Law.”
Read the court decisionRead the full story...Reprinted courtesy of
John P. Ahlers, Ahlers Cressman & SleightMr. Ahlers may be contacted at
john.ahlers@acslawyers.com
Supreme Court Grants Petition for Review Regarding Necessary Parties in Lien Foreclosure Actions
August 17, 2017 —
Lindsay K. Taft - Ahlers & Cressman PLLCFor several years, the requirements for which parties must be named in a lien foreclosure action when a release of lien bond is in place have been cloudy. RCW 60.04 et seq., the “mechanics’ lien” or “construction lien” statute, provides protection for a party or person who provides labor, materials, or equipment to a construction project. That person or party, if not paid, can file a lien against the construction project property to secure recovery. As the lien impacts the property by “clouding title” and could potentially result in foreclosure of the property, the statute sets forth strict requirements with respect to timing, notice, and parties. For example, the lien must be recorded within 90 days of the person or party’s last day of work or materials or equipment supplied, and the lien claimant must then give a copy of the claim of lien to the owner or reputed owner within 14 days of the lien recording. RCW 60.04.081.
The statute also allows a property owner or other party to “free” the property from the lien prior to the claim being resolved by issuing a release of lien bond. While the claim is still in dispute, the lien then attaches to the bond and not the property. The same rules about foreclosure, however, still apply but not without some confusion.
Read the court decisionRead the full story...Reprinted courtesy of
Lindsay K. Taft, Ahlers & Cressman PLLCMs. Taft may be contacted at
ltaft@ac-lawyers.com
“Made in America Week” Highlights Requirements, Opportunities for Contractors and Suppliers
August 14, 2023 —
Sarah Barney & Amy Hoang - The Construction SeytOn July 21, 2023, President Biden designated July 23-29, 2023, as “Made in America Week.” This proclamation builds on the Biden Administration’s efforts to bolster domestic manufacturing through evolving policies attached to government funds that require contractors and suppliers to feature varying amounts of U.S.-made content in their products and services. To commemorate this week, here is a refresher on “Made in America” and what it means for government contractors and suppliers.
What does “Made in America” mean?
Under Executive Order 14005, the Administration defined “Made in America” laws as “all statutes, regulations, rules, and Executive Orders relating to Federal financial assistance awards or Federal procurement, including those that refer to “Buy America” or “Buy American,” that require, or provide a preference for, the purchase or acquisition of goods, products, or materials produced in the United States, including iron, steel, and manufactured goods offered in the United States.” Generally speaking, “Made in America” or “Buy American” requirements refer to:
- The Buy American Act (BAA) of 1933, establishing domestic sourcing preferences for unmanufactured and manufactured articles, materials, and supplies procured by the federal government for public use, including those used on federal construction contracts;
Reprinted courtesy of
Sarah Barney, Seyfarth and
Amy Hoang, Seyfarth
Ms. Barney may be contacted at sbarney@seyfarth.com
Ms. Hoang may be contacted at ahoang@seyfarth.com
Read the court decisionRead the full story...Reprinted courtesy of
