Fairfield Connecticut Building Expert Directory

What to Expect From the New Self-Retracting Devices Standard

November 29, 2021 — Andre Pelland - Construction Executive
One of the latest and most anticipated changes to occur this year relevant to fall protection is the publishing of the ANSI/ASSP Z359.14 2021 revision. Although the effective date isn’t until August 2022, this change is prompting the need for end user to prepare for using and understanding the new terminology performance requirements that will ultimately alter equipment selection criteria. The reason for its relevance is mostly due to its industry dependence and the increasing popularity of these types of devices. This voluntary consensus standard accounts for a vast portion of the fall protection market equipment and has been adopted as the industry standard, even though it is not the legal requirement. To assure a smooth transition, the immediate priority should be to understand the changes and what it means from a usability standpoint. A clear understanding of what changes devices need to comply will allow users to proceed with a comprehensive transition plan. What Are the Most Relevant Changes for the User? Classes The most significant changes are for Class A and B devices used to designate arrest distances and forces and the introduction of the Class 1 and 2 devices. These classes were known as designators for arresting falls at 24 inches and under with higher forces (Class A), and 54 inches and under with lower forces (Class B). Class 1 devices allow anchoring on overhead anchorages only and limitg freefall to no more than two feet. Reprinted courtesy of Andre Pelland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Pelland may be contacted at andre.pelland@puresafetygroup.com

Understand Agreements in Hold Harmless and Indemnity Provisions

June 06, 2022 — Jeffrey Cavignac - Construction Executive
One of the most important provisions in a construction contract is the indemnity provision. An indemnity provision, which usually includes a requirement to hold harmless and defend another party, is included in nearly all construction contracts. Generally speaking, the upstream party (a general contractor or owner, for example) is attempting to shift risk to a downstream party (the general contractor or a subcontractor). In simple terms, subject to certain parameters, the downstream party is agreeing to be responsible for the upstream parties’ mistakes. DEFINING INDEMNIFICATION Insurance brokers focused on development and construction businesses get asked frequently: “If we sign this, are we insured?” It would be great if this could be answered “yes” or “no,” but life is rarely that straightforward. To understand whether a specific indemnification is insurable, we have to drill down on the actual provision. Let’s look at a typical indemnification below:

“To the fullest extent permitted by law the Contractor shall indemnify, defend and hold harmless the owner, architect, architect’s consultants and agents and employees of any of them from and against any claims, damages, losses and expenses, including but not limited to attorneys’ fees, arising out of or resulting from performance of the work whether caused in whole or in part by the contractor, a subcontractor, anyone directly or indirectly employed by them or anyone for whose acts they may be liable.”

Reprinted courtesy of Jeffrey Cavignac, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

CGL Policy May Not Cover Cybersecurity and Data-Related Losses

March 25, 2024 — Susana Arce - Saxe Doernberger & Vita, P.C.
The construction industry, like many other industries, has experienced an increased reliance on, and implementation of, technology in the past few years. Smart phones and tablets are used on most project sites, computers are an integral part of the planning process, and various software programs are used throughout the construction process. Likewise, much of the machinery and equipment used during construction (e.g., total stations, trucks, tower cranes) is interconnected, and in some cases, operated or monitored remotely.1 With an increase in technology comes a risk of cybersecurity and data-related losses. Many large businesses purchase Commercial General Liability (“CGL”) insurance and assume cybersecurity and data-related losses are covered. Unfortunately, this is generally not the case. CGL policies typically cover three general types of damage: bodily injury, property damage, and advertising injury. Read the court decision
Read the full story...
Reprinted courtesy of Susana Arce, Saxe Doernberger & Vita, P.C.
Ms. Arce may be contacted at SArce@sdvlaw.com

Modular Homes Test Energy Efficiency Standards

August 06, 2014 — Beverley BevenFlorez-CDJ STAFF
The Systems Building Research Alliance (SBRA) will be putting three different energy standards to the test, according to Big Builder. Clayton Homes has been selected to build three modular homes, which will be used in a 15-month energy performance test conducted by Southern Energy Homes (SEHomes). Each home will comply with a different standard: “one complies with the U.S. Department of Housing and Urban Development’s (HUD) thermal standards, one is an Energy Star-qualified home and one meets the DOE requirements for the Challenge Home Program, also known as a DOE Zero Energy Ready Home.” Testing is expected to be completed July 2015. Read the court decision
Read the full story...
Reprinted courtesy of

A Relatively Small Exception to Fraud and Contract Don’t Mix

April 01, 2015 — Christopher G. Hill – Construction Law Musings
Remember all of my posts about how fraud and contract claims don’t usually play well in litigation? Well, as always with the law, there are exceptions. For instance, a well plead Virginia Consumer Protection Act claim will survive a dismissal challenge. A recent opinion out of the Alexandria division of the U. S. District Court for the Eastern District of Virginia sets out another exception, namely so called fraudulent inducement. In XL Specialty Ins. Co. v. Truland et al, the Court considered the question of whether both a tort and contract claim can coexist in the same lawsuit when the tort claim is based upon the information provided to the plaintiff when that information proves false. As the courts of Virginia have held for years, only certain information and statements made pre-contract can be the basis for a fraud claim in the face of a contractual duty to perform. One type of statement that is not properly the subject of a fraud in the inducement type claim is sales talk or opinion. Such sales talk (for example claiming that your company is the best for the job) is not the subject of a fraud claim because it is not meant to be relied upon and that such talk is an opinion about future performance, not a false statement of present fact or intent. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, Law Office of Christopher G. Hill, PC
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Insurance Tips for Contractors

December 08, 2016 — Patrick McNamara - Porter Law Group
Many contractors contentedly accept the insurance policies presented to them by their insurance carriers. However, it is a much better practice to be an active participant in choosing the most appropriate coverage for your business and the specific jobs that you are performing. Use the following tips to be sure your company has the best and most comprehensive coverage.

Never purchase a Commercial General Liability (“CGL”) policy with a “sunset” provision limiting coverage under Products & Completed Operations liability (P&CO) to a 2, 3 or 4-year term. Why? Because the California statute of limitations for construction defect claims is generally 10 years.
Never consider a “Claims-made” or “Modified Occurrence” coverage form which also have a built-in limitation as to the length or term of P&CO coverage. Example: If you purchase a claims-made policy and decide to “switch” your insurance to the preferred “occurrence” coverage form, unless a special provision is made prior to the new purchase, the claims-made coverage would become worthless after the sixty (60) day claims-reporting period.

Read the court decision
Read the full story...
Reprinted courtesy of Patrick McNamara, Porter Law Group
Mr. McNamara may be contacted at pmcnamara@porterlaw.com

Court Again Defines Extent of Contractor’s Insurance Coverage

November 26, 2014 — Craig Martin – Construction Contractor Advisor
The ever changing landscape of insurance coverage for contractors continues to be clarified in Texas. The Fifth Circuit Court of Appeals applied Texas law in Crownover v. Mid-Continent Casualty Company, concluding that contractors do have insurance coverage to cover claims that a project was not constructed in a good and workmanlike manner. In this case, the Crownovers hired a contractor to build a house. The contract contained a warranty-to-repair clause. Shortly after construction was completed, cracks began to appear in the walls and foundation, and there were problems with the heating and air conditioning system. The Crownovers demanded that the contractor repair the problems and the contractor refused. The Crownovers brought an arbitration proceeding against the contractor and prevailed, obtaining a judgment that the contractor must pay for repairs to the foundation and HVAC system. The contractor then filed for bankruptcy and the bankruptcy court allowed the Crownovers to pursue their claim against the contractor’s insurer. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

Another (Insurer) Bites The Dust: Virginia District Court Rejects Narrow Reading of Pollution Exclusion

September 10, 2018 — Michael S. Levine & Latosha M. Ellis - Hunton Insurance Recovery Blog
In a victory for policyholders, and an honorable mention for Merriam-Webster’s Dictionary, a federal judge in Virginia ruled that the dispersal of concrete dust that damaged inventory stored in an aircraft part distributor’s warehouse was a pollutant, as defined by the policy, but that it also constituted “smoke” as that term was defined in the dictionary, thereby implicating an exception to the policy’s pollution exclusion. The Court then granted summary judgment for the policyholder, who had suffered a $3.2 million loss. Reprinted courtesy of Michael S. Levine, Hunton Andrews Kurth and Latosha M. Ellis, Hunton Andrews Kurth Mr. Levine may be contacted at mlevine@HuntonAK.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES