Surety Bond Now a Valid Performance Guarantee for NC Developers (guest post)
June 09, 2016 —
Melissa Dewey Brumback – Construction Law in North CarolinaWelcome summer days! Today we have a guest post by Todd Bryant, president and founder of
Bryant Surety Bonds. He is a surety bonds expert with years of experience in helping contractors get bonded and start their business. While design professionals generally don’t have to deal with performance bonds directly, they are often at the front lines of advising owners as to various Requests for Proposals submitted by hopeful contractors. In that spirit, be sure to read how the new law changes security requirements. Take it away, Todd!
Last year wrapped up with some good news for North Carolina subdivision developers:
House Bill 721 confirmed that construction bonds are, in fact, a viable form of performance guarantee. Previous legislation was ambiguous on this point, but the new bill– which took effect last October– sought to clear up the confusion. Although the new rules have been in effect for eight months, there’s been scant coverage of the changes, and what they mean for developers.
Read the court decisionRead the full story...Reprinted courtesy of
Melissa Dewey Brumback, Ragsdale Liggett PLLCMs. Brumback may be contacted at
mbrumback@rl-law.com
Insurer's Motion for Summary Judgment on Faulty Workmanship Denied
June 04, 2024 —
Tred R. Eyerly - Insurance Law HawaiiThe court found that the insurer failed to meet its burden on summary judgment seeking a judgment that faulty workmanship precluded coverge. Auto-Owners Ins., Co. v. AAA Discount Homes, LLC, 2024 U.S. Dist. LEXIS 48463 (S.D. Ga. March 19, 2024).
Heather Way sued AAA Discount Homes, LLC and Delta Transport & Management, Inc. for manufacturing defects found in a manufactured home which was delivered and assembled by Delta. Way had contracted with AAA for the construction, delivery, assembly, setting, tie down with brick underpinning steps and construction of front and back porches. AAA, assisted by Delta, delivered the home and assembled it, including raising the roof, over the course of a few days.
Subsequently, Way discovered extensive water damage and mold in the home. Way alleged that AAA and its subcontractors made careless, unsafe, and unsuccessful attempts at removing the old and repairing the water damage. The presence of chemicals in the home made it uninhabitable. Way alleged the home was improperly assembled by Delta and its negligence resulted in damages.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Candis Jones Named to Atlanta Magazine’s 2021 “Atlanta 500” List
March 01, 2021 —
Candis Jones - Lewis Brisbois NewsroomAtlanta Partner Candis Jones has been named to Atlanta Magazine’s 2021 “Atlanta 500” list of the most powerful business leaders in Atlanta. To compile this list, the publication reviewed nominations from the public and consulted experts across various sectors. The magazine’s editors and writers considered not only the status of the nominees within their respective organizations, but also whether the nominees were visionary by, for example, leading programs for their communities or creating opportunities for employees.
Ms. Jones is a member of Lewis Brisbois’ General Liability Practice. Representing a wide array of clients, including Fortune 500 companies, insurance carriers, and a major metropolitan transit authority, she focuses her practice on insurance defense, premises liability, personal injury, and medical malpractice. She was recently installed as the President of the Gate City Bar Association, the oldest African-American bar association in the state of Georgia, and also serves as a member of the Georgia Defense Lawyers Association and the Georgia Association of Black Women Attorneys.
Read the court decisionRead the full story...Reprinted courtesy of
Candis Jones, Lewis BrisboisMs. Jones may be contacted at
Candis.Jones@lewisbrisbois.com
Quick Note: Third-Party Can Bring Common Law Bad Faith Claim
July 01, 2019 —
David Adelstein - Florida Construction Legal UpdatesA third-party claimant may bring a common law bad faith claim against a defendant’s liability insurer. Mccullough v. Royal Caribbean Cruises, 2019 WL 2076192, *2 (S.D.Fla. 2019). “A bad faith claim may be brought by a third party absent an assignment from the [defendant] insured.” Id. This can only be done in the third-party bad faith context with the argument that the insurer’s “bad faith” conduct resulted in a judgment against the defendant-insured in excess of the policy limits. However, in any third-party bad faith claim (and, really, bad faith claim in general), coverage must first be determined under the policy.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
No Duty to Defend Construction Defect Claims under Kentucky Law
March 25, 2024 —
Tred R. Eyerly - Insurance Law HawaiiThe federal district court determined that the insurer was not obligated to defend construction defect claims under Kentucky law. Westfield Ins. Co. v. Kentuckiana Commercial Concrete, LLC, 2023 U.S. Dist. LEXIS 222674 (W.D. Ky. Dec. 14, 2023).
HRB, the owner of an apartment complex, filed an arbitration demand against the general contractor, Doster Commercial Construction, for allegedly doing faulty concrete work in the construction of the apartments. Doster added its concrete subcontrator Kentuckiana Commercial Concrete - and 16 other subcontractors - to the arbitration. Kentuckiana tendered the claim to its insurer, Westfield. Wesfield defended. Doster claimed it was an additional insured under the Westfield policy and also sought coverage. Westfield refused the defend Doster. Westfield argued there was no "occurrence."
Westfield then sued both Doster and Kentuckiana in federal court, seeking a declaration that it had no duty to defend either. Westfield moved for a judgment on the pleadings.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
With Trump's Tariff Talk, Time to Negotiate for Escalation Clauses in Construction Contracts
December 17, 2024 —
Richard Korman - Engineering News-RecordRemember 2019? That’s when contractors faced sudden material price surges from tariffs during then-President Donald Trump’s first term in office. How about 2021? That's when contractors saw new price surges and long delivery delays because of Covid-19.
Read the court decisionRead the full story...Reprinted courtesy of
Richard Korman, ENRMr. Korman may be contacted at
kormanr@enr.com
Hurricane Milton Barrels Toward Florida With 180 MPH Winds
October 07, 2024 —
Brian K Sullivan & David R Baker - BloombergMilton exploded into the Atlantic’s strongest hurricane this year, bearing down as a catastrophic Category 5 storm on a Florida region still struggling to recover from Helene’s devastation.
Milton’s top winds reached 180 miles (290 kilometers) per hour, up from 90 mph just 16 hours earlier, the US National Hurricane Center said in an advisory at 5 p.m. New York time. Milton now bests Hurricane Beryl, which raked Texas, Mexico and the Caribbean in July, as the most powerful Atlantic storm this season.
With winds this intense, Milton is capable of collapsing homes, flattening trees and triggering power outages that could last weeks to months. It’s difficult for hurricanes to maintain their maximum strength for long, however, so Milton’s winds may drop as it nears Florida’s west coast. Only four Category 5 hurricanes have hit the US mainland, including Michael, which struck Florida’s Panhandle in 2018.
Reprinted courtesy of
Brian K Sullivan, Bloomberg and
David R Baker, Bloomberg Read the court decisionRead the full story...Reprinted courtesy of