Fairfield Connecticut Building Expert Directory

Create a Culture of Safety to Improve Labor Recruitment Efforts

September 12, 2022 — Grant Robbins - Construction Executive
The commercial construction industry must rely on skilled labor to survive. Skilled labor, however, is hard to come by. In fact, many construction firms report projects being delayed because of shortages in the workforce. Part of the problem is training. Few companies have the time, resources or opportunities to train new construction workers. But the biggest reason for the labor shortage in the construction industry is simply a lack of people joining the trades. Decades ago, construction was a respected career choice. Over the years, however, the pressure to get into a four-year college has created negative perceptions of working in the trades. Some commercial construction companies choose to work with fewer crews as a result of the lack of skilled labor, therefore limiting the number of jobs they can handle. The labor shortage in the construction industry has simply made it nearly impossible to find subcontractors to adequately staff upcoming projects (one survey found that 35% of contractors had to turn down jobs due to a lack of skilled laborers). This then leads to hikes in construction costs and delays in scheduling, which can take a major toll on business. Reprinted courtesy of Grant Robbins, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Short-Term Rental Legislation & Litigation On the Way!

November 18, 2019 — Patrick J. Paul - Snell & Wilmer Real Estate Litigation Blog
The advent of the shared economy in the real estate context has provided homeowners and investors alike with expanded opportunities to generate revenue from the use of their real estate. Airbnb and VRBO are two of the most popular companies facilitating short-term rental availability. The rapid growth in this shared real estate economy has served as a disruptor of sorts to the traditional hotel and hospitality industry, causing that industry to revisit its own models in order to better compete. The popularity of short-term rental use, however, has created a whole new set of problems about which property owners, state and local governments, renters, and those impacted by the explosion of short-term rentals should be aware. Among other things, without more, most traditional homeowners’ policies will not cover the insured property’s use for commercial purposes – a problem similar to the early rideshare providers. Full and part-time resident owners who previously enjoyed a greater certainty with respect to their neighbors are today frustrated by the revolving door of vacationers, revelers, wedding attendees and similar nontraditional uses of neighborhood residential property. Read the court decision
Read the full story...
Reprinted courtesy of Patrick J. Paul, Snell & Wilmer
Mr. Paul may be contacted at ppaul@swlaw.com

Judge Halts Sale of Brazilian Plywood

June 06, 2022 — Beverley BevenFlorez – CDJ Staff
A permanent injunction was issued by Judge Roy Altman in a Ft. Lauderdale federal court on May 24th that requires the revocation of all PS 1 certificates that were issued by PFS-TECO to more than a dozen Brazilian mills that produced structural plywood for the U.S. market, reported Business Wire. “This case highlights how a few bad actors profited by essentially looking the other way while substandard, and potentially dangerous plywood was imported into the U.S. and used to build homes and businesses,” Michael Haglund, counsel representing the U.S. Structural Plywood Integrity Coalition, of Haglund Kelley, LLP, told Business Wire. Building codes throughout the U.S. require the use of PS 1 structural plywood in construction. "If product standards are not being met, there can be serious implications for all homes constructed using those substandard wood panel products," Tyler Freres, VP of Sales for Freres Engineered Wood, told CDJ. "Contractors and homeowners should be able to trust that U.S. certification agencies are doing their due diligence to accurately inspect panels, ensuring consumers' health and safety." The U.S. Structural Plywood Integrity Coalition, including nine family-owned U.S. plywood manufacturers, alleged that PFS-TECO falsely certified that plywood from Brazil met U.S. structural integrity requirements. This substandard plywood has been used throughout the U.S. In particular, it was used during the hurricane reconstruction efforts in Florida and Puerto Rico due to its cheaper price. In 2021, Brazilian plywood made up 11% of the U.S. supply with nearly 1.2 billion square feet sold. Read the court decision
Read the full story...
Reprinted courtesy of

U.K. Broadens Crackdown on Archaic Property Leasehold System

October 23, 2018 — Sree Vidya Bhaktavatsalam - Bloomberg
The U.K. government is cracking down on what it called “unfair” leasehold practices as part of sweeping reforms to its housing system, in a move that would modernize the property market to bring it more in line with nations such as the U.S. Initially prompted by a malpractice scandal, the proposed scope of the focus by the Ministry of Housing, Communities & Local Government has become far broader. A consultation will seek views not only on the practice of charging buyers an annual fee for owning leasehold properties -- known as ground rents -- it will review the whole process of buying, selling and property management of leasehold homes. Read the court decision
Read the full story...
Reprinted courtesy of Sree Vidya Bhaktavatsalam, Bloomberg

3D Printing: A New Era in Concrete Construction

April 11, 2022 — Zoey Zhao - Construction Executive
The construction of buildings using concrete has been around since the time of the Romans. In all those centuries, concrete structures have been built using essentially the same method: forms, reinforcement, mixing, pouring, setting, repeat. The process is costly and time-consuming. The construction of the forms alone demands dozens of workers and requires a substantial amount of lumber, keeping labor and materials costs high. Builders might save some time using prefabricated concrete blocks, but such materials are not appropriate for every construction project and carry their own expenses. For the first time in history, builders have an alternative to traditional concrete construction methods that are more cost-effective, less expensive, more environmentally friendly and allow for a wide range of possible construction projects. Three-dimensional concrete printing for construction has emerged in the building field as a viable and efficient alternative. Reprinted courtesy of Zoey Zhao, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Ms. Zhao may be contacted at zoey@aictbuild.com

Bay Area Counties Issue Less Restrictive “Shelter in Place” Orders, Including for Construction

May 04, 2020 — Garret Murai - California Construction Law Blog
The short story: Construction can resume. The long story: Construction can resume beginning Monday, May 4, 2020, with extensive and detailed restrictions. Six Bay Area Counties Loosen Shelter-in-Place Restrictions Including Allowing Construction to Resume Earlier this week, six Bay Area counties and the City of Berkeley issued new orders requiring the use of face coverings when in public. The six Bay Area counties, which also happen to be the first counties in the nation to issue shelter-in-place orders, are Alameda, Contra Costa, Marin, San Francisco, San Mateo and Santa Clara. When do the revised shelter-in-place orders take effect? The revised shelter-in-place orders take effect at 11:59 p.m. on May 3, 2020 and will remain in effect until 11:59 p.m. on May 31, 2020 unless extended, rescinded, superseded, or amended. Thus, effectively, the new orders take effect on Monday, May 4, 2020. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

EPA Announces Decision to Retain Current Position on RCRA Regulation of Oil and Gas Production Wastes

June 03, 2019 — Anthony B. Cavender - Gravel2Gavel
After much study, EPA has decided against changing its current RCRA Subtitle D rules affecting the state regulation of oil and gas exploration & production waste. Since 1988, EPA has determined that most such wastes should be regulated as only non-hazardous wastes subject to RCRA Subtitle D, and not the more onerous hazardous waste provisions of RCRA Subtitle C. (See the Regulatory Determination of Oil and Gas and Geothermal Exploration, Development and Production Wastes, 53 FR 25,446 (July 6,1988).) As a result, under the Subtitle D rules, the primary regulators of such waste are state regulatory agencies, which follow the state plan non-hazardous waste guidelines developed by EPA. This regulatory disposition has proven to be fairly controversial, and it was recently challenged in a lawsuit filed in the U.S. District Court for the District of Columbia: Environmental Integrity Project, et al. v. McCarthy. To settle this lawsuit, EPA and the plaintiffs entered into a consent decree by which EPA was to make certain determinations about the future of the program after conducting an appropriate study. That study, Management of Exploration, Development and Production Wastes: Factors Informing a Decision on the Need for Regulatory Action, has been completed, and it concludes, after a fairly comprehensive review of these state regulatory programs, that “revisions to the federal regulations for the management of E&P wastes under Subtitle D of RCRA (40 CFR Part 257) are not necessary at this time.” In a statement released on April 23, 2019, EPA accepted these findings and promised that it would continue to work with states and other stakeholders to identify areas for improvement and to address emerging issues to ensure that exploration, development and production wastes “continue to be managed in a manner that is protective of human health and the environment.” Read the court decision
Read the full story...
Reprinted courtesy of Anthony B. Cavender, Pillsbury
Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com

Jobsite Safety, Workforce Shortage Drive Innovation in Machine Automation

August 07, 2018 — Scott Crozier - Construction Executive
From driverless cars and drones, to robots working in operating rooms, manufacturing plants and fast food restaurants, machine automation is making headlines – and will continue to do so for the foreseeable future. And when it comes to machine automation, the construction industry is poised to be a hotbed of innovation. Equipment manufacturers and technology providers in the construction industry have the benefit of using the lessons learned from the manufacturing and automotive industries to meet the needs of contractors, project owners and machine operators through more efficient, highly automated equipment. According to the Society of Automotive Engineers (SAE), there are six stages of automation, ranging from zero autonomy to full automation, where a vehicle is capable of performing all driving functions under all conditions. The construction industry is somewhere in the middle of these six stages, with some automation functionality available on some equipment today, but still requiring an operator to remain engaged with the driving task and the environment. Reprinted courtesy of Scott Crozier, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES