Cambridge Massachusetts Building Expert Directory

Manhattan Site for Supertall Condo Finds New Owner at Auction

December 15, 2016 — Oshrat Carmiel – Bloomberg
A development site slated for an almost 1,000-foot condo tower on Manhattan’s far east side found a new owner through a bankruptcy auction Tuesday, removing a hurdle for construction after about a year of delays. Gamma Real Estate, the lender to the project, won the auction with a credit bid of $86 million and is poised to take control of the site, pending approval from the bankruptcy court, said David Schechtman, a broker with Meridian Investment Sales, which handled the auction with another brokerage. Read the court decision
Read the full story...
Reprinted courtesy of Oshrat Carmiel, Bloomberg
Mr. Carmiel can be followed on Twitter @OshratCarmiel

Read Before You Sign: Claim Waivers in Project Documents

July 06, 2020 — William E. Underwood - ConsensusDocs
Not all claim waivers are appropriately titled “Waiver of Claims.” In fact, claim waivers can be found “hiding” without any advertisement or fanfare in a number of project documents, including change orders and applications for payment. So although getting work quickly approved and paid for is important, taking time to read the specific language in your project documents is just as important. Failure to pay close attention to this language could result in the waiver of key, unresolved project claims. Further, and although it should go without saying, it is also just as important to read all of the terms of your contract. Important waiver language might not exist on the face of form project documents, but rather might be contained in the general and/or supplemental conditions of your contract and automatically incorporated into your form project documents. And these types of incorporated waivers can be just as enforceable. So it is critically important to understand what you are signing and the implications it might have on future claims. This article will explore some of the common types of claim waivers that can be found in project documents so that you are better positioned to avoid inadvertently waiving claims in the future. Read the court decision
Read the full story...
Reprinted courtesy of William E. Underwood, Jones Walker LLP
Mr. Underwood may be contacted at wunderwood@joneswalker.com

California Governor Signs SB 496 Amending California’s Anti-Indemnity Statute

June 05, 2017 — William S. Bennett - Saxe Doernberger & Vita, P.C.
The bill amends Cal. Civ. Code § 2782.8 as it applies to indemnity agreements with design professionals. The pre-existing § 2782.8 prohibited public agencies from requiring indemnity from design professionals for anything other than claims arising out of, pertaining to, or relating to the negligence, recklessness, or willful misconduct of the design professional. Under the newly passed bill, the indemnity restrictions imposed on public agencies when contracting with design professionals will now apply to all parties contracting with design professionals for professional services (effective Jan. 1, 2018). These restrictions also apply to a party contractually imposing a defense obligation on the design professional. The revised statute specifically identifies architects, landscape architects, professional engineers, and professional land surveyors as included within the meaning of “design professional,” however it is unclear whether that is the extent of the phrase’s meaning. Read the court decision
Read the full story...
Reprinted courtesy of William S. Bennett, Saxe Doernberger & Vita, P.C.
Mr. Bennett may be contacted at wsb@sdvlaw.com

Wearable Ways to Work in Extreme Heat

July 15, 2024 — Clare Epstein - Construction Executive
Earth experienced its hottest months yet in summer 2023, and NASA scientists are expecting 2024 to be even hotter. Rising temperatures and high humidity aren’t just uncomfortable for those outside during the summer months: They can cause serious health consequences, including death. While employers are working to find ways to combat the heat, the extreme variability in weather conditions continues to pose threats to employees. Recently, company leaders have turned to new methods and technologies to help their teams stay safe while working both indoors and outdoors. A balance of methods and technology is necessary to keep everyone safe while they work. As summer approaches, is important to remember that the time to review and update current heat-stress safety plans is in the spring—or better yet, year-round—in order to prioritize employee safety and determine both proactive and reactive measures needed to withstand the hottest months of the year. TRIED AND TRUE While we are all navigating new ways of working safely in extreme temperatures, the tried-and-true measures are still extremely useful in preventing heat stress among employees. Employers can support their employees working outdoors by ensuring there are proper amenities available at all times, including shady areas, a water source and electrolyte drinks. Reprinted courtesy of Clare Epstein, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

The Great Fallacy: If Builders Would Just Build It Right There Would Be No Construction Defect Litigation

January 21, 2015 — David McLain – Colorado Construction Litigation
As the 2015 Colorado legislative session gets into full swing, there is a lot of anticipation and discussion regarding this year’s construction defect reform bill. It seems like every time a reporter broaches this issue in an article, there is a quote from a plaintiffs’ attorney stating that if builders would just build homes right, there would be no need for construction defect litigation. This is the sentiment expressed in the site www.BuildOurHomesRight.com. The problem with this argument is that it assumes that the “construction defects” for which associations sue are those only that affect the performance of the homes, or are likely to affect the performance of the homes during the useful life of the component at issue. Unfortunately, this is simply not the case. Over the years, the plaintiffs’ bar has stacked the deck, so to speak, making actionable every technical building code violation, regardless of whether it has any impact, or will ever likely have any impact, on the performance of the homes involved. Read the court decision
Read the full story...
Reprinted courtesy of David M. McLain, Higgins, Hopkins, McLain & Roswell, LLC
Mr. McLain may be contacted at mclain@hhmrlaw.com

Landowners Try to Choke Off Casino's Water With 19th-Century Lawsuit

December 17, 2015 — Edvard Pettersson – Bloomberg
California’s latest water war is being waged at the edge of wine country against an Indian tribe planning a massive casino expansion as a group of landowners tries to stop them with a lawsuit from 1897. The Santa Ynez Band of Chumash Indians is spending $170 million to build out its resort, featuring a 12-story tower on a bucolic landscape where only the mountains are higher. The tribe has also snapped up 1,400 more acres to house cramped residents of its reservation. Read the court decision
Read the full story...
Reprinted courtesy of Edvard Pettersson, Bloomberg

Construction Lien Waiver Provisions Contractors Should Be Using

January 06, 2020 — Jason Lambert - Construction Executive
It is common in construction for a subcontractor or material supplier of any tier to be required to provide a lien waiver when receiving payment. But not all lien waivers are created equal. While at a minimum, a lien waiver, by definition, needs to include a release of liens, it can also include many other terms that can tie up loose ends or resolve potential problems before they begin. Additional Releases A typical lien release is going to release any liens and right to claim liens on the subject property. But a lien waiver can also include releases of any claims against surety bonds, other statutory rights or claims, and at its broadest, claims against the paying party. One example of a provision that could help accomplish this is a release of “any right arising from a payment bond that complies with a state or federal statute, any common law payment bond right, any claim for payment, and any rights under any similar ordinance, rule, or statute related to claim or payment rights.” Broad release language can also be used to effectively preclude any claims arising prior to the date of the release. Payment Representations and Warranties A typical lien release has no representations or warranties about payment to subcontractors or material suppliers of a lower tier. But contractors can include language requiring the company receiving payment to represent and warrant that all subcontractors of a lower tier have been paid or will be paid within a certain timeframe using the funds provided and that these are material representations and inducements into providing payment. On a related note, if the contract requires subcontractors to provide lien releases from lower tier subcontractors in addition to their own release when seeking payment, contractors can require the sub-subcontractor releases to include representations that they have been paid by the subcontractor to try and tie up payment loose ends all around. Reprinted courtesy of Jason Lambert, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Lambert may be contacted at jason.lambert@nelsonmullins.com

Overview of New Mexico Construction Law

June 25, 2019 — Walter F. Crowson - Snell & Wilmer Under Construction Blog
We’ve seen an uptick in out-of-state companies working on construction projects in New Mexico. The following is an overview of some of the nuances of New Mexico construction law about which companies may want to be aware. Construction Contract Issues Limitation of Liability Clauses are usually Enforceable, but Anti-Indemnity Clauses Are Not New Mexico courts have enforced limitation of liability clauses included in construction contracts. See Fort Knox Self Storage, Inc. v. W. Techs., Inc., 140 N.M. 233, 237 (N.M. Ct. App 2006). New Mexico law recognizes the difference between contracts that insulate a party from any and all liability and those that simply limit liability. Fort Knox Self Storage, Inc., 140 N.M. 233 at 237. An exculpatory clause immunizes a party from liability, whereas a limitation of liability clause merely curtails liability. Id. A limitation of liability clause has been held not to violate New Mexico public policy because the party “still bears substantial responsibility for its actions.” Id.; see also Cowan v. D'Angelico, 2010 WL 11493789, *6 (D. N.M. Apr. 26, 2010). Read the court decision
Read the full story...
Reprinted courtesy of Walker F. Crowson, Snell & Wilmer
Mr. Crowson may be contacted at wcrowson@swlaw.com

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES