Seattle Washington Building Expert Directory

How Robotics Can Improve Construction and Demolition Waste Sorting

September 11, 2023 — Emily Newton - Construction Executive
Commercial construction projects generate a lot of waste. Managing this debris is crucial to minimizing the industry’s environmental impact, but it’s often a time-consuming and error-prone process. Robotic waste sorting provides a better alternative. Why C&D Waste Management Must Improve The current state of construction and demolition (C&D) debris management leaves considerable room for improvement. Nearly all C&D waste takes decades to break down in landfills—and the sector generates hundreds of millions of tons of it annually. More efficient debris management would help firms protect the environment and their bottom line. Poor waste management practices also take an economic toll. Recycling extends materials’ useful life, helping minimize resource costs. Inefficient waste sorting may additionally lead to unnecessarily high workforce expenses and incur lost business from firms’ lack of sustainability. Reprinted courtesy of Emily Newton, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Mississippi Floods Prompt New Look at Controversial Dam Project

March 16, 2020 — Autumn Cafiero Giusti - Engineering News-Record
Flooding from the Pearl River in Mississippi has created a renewed sense of urgency for regional flood prevention efforts, with officials set to decide in six months whether to approve a controversial flood control plan, says an attorney for the region’s flood control district. Autumn Cafiero Giusti, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Sick Leave, Paid Time Off, and the Families First Coronavirus Response Act

April 20, 2020 — Garret Murai - California Construction Law Blog
Unemployment claims hit a historic high this past week as 3.3 million Americans filed for unemployment benefits. To give you some context, this is not only the highest number of unemployment claims ever filed, it is five times higher than the previous record of 695,000 unemployment claims in 1982. Restaurants, hotels, airlines and other businesses have begun to layoff or furlough workers. According to a survey conducted by the Associated General Contractors of America this past week, 39% of respondents reported that project owners have halted or cancelled construction projects due to deteriorating economic conditions, 45% reported project delays or disruptions, and 23% reported supply chain disruptions. While the construction industry likely won’t be impacted nearly to the same degree as the retail sector has, some involved in the construction industry may nevertheless be faced with the prospect of having to lay off or furlough workers as “shelter in place” orders are extended. If you’re faced with that situation here are a few things to remember: Paid Sick Leave Under California law, nearly all employers are required to provide paid sick leave to employees who work for 30 or more days in a given year. Paid sick leave can be used by an employee for illnesses, including COVID-19, the diagnosis, care, or treatment of existing health conditions, and preventative care for the employee or employee’s family member. The important thing to remember here is that use of paid sick leave is an employee’s choice. While an employer, concerned that an employee may have contracted COVID-19, may require that an employee not come to the office, the employer cannot force such an employee to use his or her paid sick leave. For more information, the California Labor Commissioner has created a webpage specific to COVID 19. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

Stick to Your Guns on Price and Pricing with Construction Contracts

December 20, 2021 — Christopher G. Hill - Construction Law Musings
In recent posts here at Construction Law Musings, I have discussed the need for clarity of contract, trusting your gut, and assuring that your contract has the necessities. All of these bits of advice (along with my usual advice of working with an experienced construction attorney) are true with regard to commercial construction contracts and apply ten fold in a residential construction (read working for a single/family owner on their house). With a residential project, you, as a construction contractor, are likely to be dealing with the difficult combination of an owner with little or no experience relating to how a construction project is supposed to work and an owner that is emotionally invested in the project because it is their home. Because of the above, and the fact that your project is likely the biggest single investment that the owner has made outside of possibly a prior house, the residential owner will likely be looking over your shoulder and may very well attempt to negotiate down some of the costs that they perceive as the project moves forward. In short, the average person 1. does not know how much the project truly costs the contractor, and 2. feels that because they hold the cash, they can and should have some control over the individual costs of the construction thus making those costs, and by extension, their contract, negotiable right up until the end. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Judgment Stemming from a Section 998 Offer Without a Written Acceptance Provision Is Void

March 22, 2021 — Arezoo Jamshidi, Stevie B. Newton & Lawrence S. Zucker II - Haight Brown & Bonesteel LLP
In Mostafavi Law Group, APC v. Larry Rabineau, APC (B302344, Mar. 3, 2021), the California Court of Appeal, Second Appellate District (Los Angeles), addressed an issue of first impression: whether the purported acceptance of a Code of Civil Procedure section 998 (“section 998”) offer lacking an acceptance provision gives rise to a valid judgment. The appellate court held that a section 998 offer to compromise (“998 Offer”) without an acceptance provision is invalid and any judgment stemming from it is void. In Mostafavi Law Group, plaintiffs sued defendants for defamation per se, among other claims, which was litigated at-length over several years. Defendants served plaintiffs with a written 998 Offer, offering to settle the action for the sum of $25,000.01. The 998 Offer did not specify the manner in which plaintiffs were to accept the offer. Within the statutory time period for acceptance, plaintiffs’ counsel hand-wrote the following onto the 998 Offer: “Plaintiff Mostafavi Law Group, APC accepts the offer.” That day, plaintiffs also filed a notice of acceptance of the 998 Offer, along with proof thereof, and sent a copy to defendants. The next day, having received the notice of acceptance, defendants advised plaintiffs that they would “draft and send . . . a settlement agreement for . . . signature” before paying the settlement funds. Reprinted courtesy of Arezoo Jamshidi, Haight Brown & Bonesteel LLP, Stevie B. Newton, Haight Brown & Bonesteel LLP and Lawrence S. Zucker II, Haight Brown & Bonesteel LLP Ms. Jamshidi may be contacted at ajamshidi@hbblaw.com Mr. Newton may be contacted at snewton@hbblaw.com Mr. Zucker may be contacted at lzucker@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Avoiding Construction Defect “Nightmares” in Florida

November 27, 2013 — CDJ STAFF
Describing it as a “nightmare,” Larry Tolchinsky writes about construction defects at the Willowbrook condominium complex in Florida. Writing on the website of his firm, Sackrin & Tolchinsky, Mr. Tolchinsky gives the history of the Willowbrook condo case, in which condo owners suffered problems with water intrusion and subsequent damage to their units. The builder has agreed to make repairs, though they are still suing owners who put up a website critical of the company. Mr. Tolchinsky notes that this is not “the usual way things happen in construction defect lawsuits,” and he gives the usual process. Under Florida law, homeowners must first notify those responsible of a “problem and its need for repair.” After this notice, the homeowner “will know within about 6 weeks’ time after sending that formal notice what the contractor’s position is going to be on things.” Read the court decision
Read the full story...
Reprinted courtesy of

Preparing Your Business For Internal Transition

October 14, 2019 — Stephen P. Katz, Esq. - ConsensusDocs
When is it right to start thinking about succession planning and preparing a construction company for transition? Many would agree – in concept, at least – that serious thought regarding succession and transition planning should begin at a company’s inception and be revisited throughout its lifecycle, but as a practical matter, it is frequently not part of the mindset when growing a business. This article explores issues that construction company owners should consider in order to achieve smooth transition of ownership and control. We will address three critical questions:

What happens to the business when an owner retires;
In the event an owner(s) become disabled; and,
Unplanned exit/owner pre-deceases her/his exit from the company

Owners who do not plan carefully for transition are often faced with the less than appealing option of liquidating their business for much less than its value, or by closing the business with no return upon that event. However, those who plan carefully can realize the value of their life’s work, pass the business to the next generation and see their legacy continue. Read the court decision
Read the full story...
Reprinted courtesy of Stephen P. Katz, Esq., Peckar & Abramson, P.C.
Mr. Katz may be contacted at skatz@pecklaw.com

Where Did That Punch List Term Come From Anyway?

March 27, 2019 — Duane Craig - Construction Informer
I’ve often wondered just where the term “punch list” came from, and I’ve found a few sources that seem to make sense, while others not so much. One person claims it came from the telephone installer process of “punching down” terminals on a block. That seems a bit of a stretch though. A blog writer said it had to do with the term ‘punch’ since it means to “punch something up” as in fix it. Another blog writer thought it had something to do with a long forgotten practice. Apparently subcontractors used to each have their own hole punches that would punch a hole with a shape unique to them. They would use these punches to indicate they had corrected the deficiency that was their responsibility. Read the court decision
Read the full story...
Reprinted courtesy of Duane Craig, Construction Informer

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES