Fairfield Connecticut Building Expert Directory

Public Works Bid Protests – Who Is Responsible? Who Is Responsive?

December 14, 2020 — Eric Divine - Porter Law Group
Most Public Works Solicitations Are Low Bid The process for awarding public works projects in California is controlled by the Public Contract Code. Generally, regardless of whether the public agency is the State, a county, a city or a local district, the project is awarded to the contractor who is “responsible” and submits the least expensive “responsive” bid. This is generally known as a “low bid” contract. In the context of public works, the terms responsible and responsive have very important meanings. As a result, State and local governments have gotten into very expensive trouble for not following the law. So, to understand how to best present a bid protest on a low bid solicitation, you, as a contractor should have a good understanding of the meaning of these terms. Note: There are other methods of contracting for public works that are not low bid, which are typically called “best value” contracts because the procurement process considers factors other than just price. These methods are typically used for large projects because the added complexity and expense of the procurement process only makes sense when the project is itself complex and expensive. Read the court decision
Read the full story...
Reprinted courtesy of Eric Divine, Porter Law Group
Mr. Divine may be contacted at edivine@porterlaw.com

A Discussion on Home Affordability

April 08, 2014 — Beverley BevenFlorez-CDJ STAFF
Krishna Rao, in the online publication Zillow Real Estate Research, analyzed statistics on home price affordability across the United States. Rao found that “[a]cross the United States, strong home price affordability has been recently eroded by a combination of rising home prices and mortgage rates. Some areas, particularly on the West Coast, have begun to look unaffordable compared to their historic norms, forcing some household to look to the periphery of urban areas in search of affordable homes.” However, John McManus in Big Builder said a more helpful term when looking at the new home market would be “relative affordability (which inheres both payment power and access to credit).” “Little attention has been given to the fact that many builders' mix--first- and second-time move-up and higher end homes.” McManus wrote that this “has skewed pricing conversations. When the buyer is ‘discretionary,’ has access to cash and no impediment of another property to sell in order to trigger a purchase--then both base price and price elasticity can be greater.” Read the full story, Zillow... Read the full story, Big Builder... Read the court decision
Read the full story...
Reprinted courtesy of

Select the Best Contract Model to Mitigate Risk and Achieve Energy Project Success

October 17, 2022 — Gregory S. Seador - Construction Executive
Power and energy projects are inherently complex and risky. Therefore, management and proper allocation of risk among project participants are essential to success. Careful drafting of the engineering, procurement and construction (EPC) contract is a critical first step in managing risk. The standard contract format used for power and energy construction projects is the EPC contract. In its traditional form, the EPC contract makes the EPC contractor responsible for the entire project, including engineering (design of the power plant), procurement (purchase, installation and performance of all equipment) and construction (construction of the plant). EPC contracts can, however, employ different contract models and pricing structures, each of which carries differing levels of risk for project participants. Selecting the appropriate contract model and pricing structure to meet the unique needs of the project is important. Reprinted courtesy of Gregory S. Seador, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Seader may be contacted at seador@slslaw.com

Report to Congress Calls for Framework to Cut Post-Quake Recovery Time

February 01, 2021 — Bruce Buckley - Engineering News-Record
Engineers and government agencies along with model building code and standard developers should work together to create a national framework more focused on earthquake resilience and post-quake recovery time, according to a report delivered to Congress last week. While current seismic codes address life safety, the report says stakeholders should also consider re-occupancy and functional recovery time, taking into account the potential impacts to a community as a whole. Reprinted courtesy of Bruce Buckley, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Unqualified Threat to Picket a Neutral is Unfair Labor Practice

January 08, 2019 — Wally Zimolong - Supplemental Conditions
On December 27, 2018, the National Labor Relations Board enforced a decades old policy that a union’s unqualified threat to picket a neutral employer at a “common situs” a/k/a a construction site is a violation of the National Labor Relations Act. Background The case involved area standards picketing by the IBEW of a project owned by the Las Vegas Convention and Visitors Authority (LVCVA). The IBEW sent a letter to various affiliated unions who were working on the project advising them of its intent to engage in area standards picketing at the project directed to the merit shop electrical subcontractor performing work there. The IBEW also sent a copy of the letter to the LVCVA. Read the court decision
Read the full story...
Reprinted courtesy of Wally Zimolong, Zimolong LLC
Mr. Zimolong may be contacted at wally@zimolonglaw.com

Documenting Contract Changes in Construction

December 07, 2020 — J.D. Holzheauser - Construction Executive
Construction projects are almost inevitably subject to changes in the contract. A fundamental understanding of construction changes, how those changes are governed and what is necessary to ensure a complete change are of paramount importance to all parties involved in a construction project. This article is not a treatise on construction contract changes; rather, it provides advice on actions a contractor can take during construction that will help the contractor recover time or money when a contract’s schedule or scope of work needs to be changed. Changes Defined Changes to a construction project affect two broad spheres—timing and scope of work. Changes usually present themselves as either a change order or a change directive. Each may go by a different name depending on the contractual scheme in the project’s prime contract, but they essentially have the same characteristics. The difference between a change order and a change directive is one of agreement. A change order (in the owner-prime contractor context) occurs when the contractor and the owner agree to a change in the timing or scope of work in the contract. Normally, the change order is a written agreement to change the contract and is executed by the contractor and owner. Reprinted courtesy of J.D. Holzheauser, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Holzheauser may be contacted at jdholzheauser@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Viewpoint: Firms Should Begin to Analyze Lessons Learned in 2020

January 04, 2021 — Rich Friedman - Engineering News-Record
If there’s one phrase that describes 2020, it was not “business as usual.” How AEC firms fared last year depended upon their strategies for navigating an uncertain landscape. While we talk about finding a new normal, company leaders in 2021 will have to think more expansively about what they want that “normal” to look like. Reprinted courtesy of Rich Friedman, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

New Zealand Using Plywood Banned Elsewhere

October 30, 2013 — CDJ STAFF
Copper chromium arsenate helps protect wood against insect damage and fungal growth. Unfortunately, its use leads to arsenic exposure. The safety concerns over CCA for both construction workers and the people who later use the buildings have led to the CCA-treated plywood being banned or restricted in most countries, including the United States, Canada, France, the United Kingdom, and Germany. New Zealand is not on the list of countries restricting or banning CCA-treated wood. Dr. Merial Watts, a science coordinator for Pesticide Action Network NZ described the product as an “unacceptable public health risk,” and said that “wrapping homes in CCA-treated plywood is a very bad idea.” One construction official, speaking anonymously, noted that “workers have to handle it with gloves and full body suits,” but those guidelines may not be followed. A foreman on a building site said “I know about the treatment but I don’t take many precautions.” Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES