Columbus Ohio Building Expert Directory

Appraisal Appropriate Despite Pending Coverage Issues

August 16, 2021 — Tred R. Eyerly - Insurance Law Hawaii
The court granted the insured's motion for partial summary judgment, allowing an appraisal to go forward even with outstanding coverage issues in dispute. DC Plastic Products Corp. v. Westchester Surplus Lines Ins. Co., 2021 U,.S. Dist. LEXIS 95908 (D. N.J. May 19, 2021). DC Plastic's property was damaged by Superstorm Sandy in October 2012. Claims submitted to Westchester resulted in a payment of $951,102.89 to DC Plastic. The parties disagreed on whether further payments were due. In 2017, DC Plastic sued Westchester for additional payments. DC Plastic moved to compel an appraisal for its claims, requesting that the court appoint an umpire for the appraisal process. Westchester cross-moved to dismiss the case in its entirety. DC Plastic's complaint asked that the court appoint an umpire. The policy stated if the parties could not agree on the amount of loss, each party would select an appraiser, who would then agree upon an umpire. If they could not agree, either party could request the court to appoint the umpire. Therefore, the court was authorised to select the umpire here. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Colorado Drillers Show Sensitive Side to Woo Fracking Foes

September 03, 2014 — Zain Shauk and Bradley Olson – Bloomberg
A fight over fracking is looming in Texas. Another stand-off is shaping up in Colorado. Yet drillers’ reactions couldn’t be more different. In Texas, drillers are doing their noisy in-your-face fracking as usual. Meanwhile, on a small farm about an hour from the Colorado Rocky Mountains, the oil industry is giving fracking a makeover, cutting back on rumbling trucks and tamping down on pollution. Oil companies in Colorado are responding to a rising tide of resentment as local communities and environmental activists vie to impose measures to ban fracking or restrict drilling. A series of ballot initiatives and other grass roots opposition around the country is seen as threatening the booming shale industry, even in oil-friendly Texas, where the U.S. energy renaissance began. Reprinted courtesy of Zain Shauk, Bloomberg and Bradley Olson, Bloomberg Mr. Shauk may be contacted at zshauk@bloomberg.net; Mr. Olson may be contacted at bradleyolson@bloomberg.net Read the court decision
Read the full story...
Reprinted courtesy of

Connecting Construction Project Information: Open Technology Databases Improve Project Communication, Collaboration and Visibility

March 14, 2018 — Andy Kayhanfar - InEight
The construction industry has been plagued for decades with projects coming in over budget and behind schedule. There are many reasons this happens, but it ultimately comes down to just one thing – a lack of connected information. Today, gigabytes and even terabytes of data are generated on a project and housed in different systems that do not talk or share information, which creates a closed approach and inhibits collaboration. Data is siloed and only accessible to certain companies, departments or disciplines, which gives each project stakeholder a very limited view into the status of the project as they are making decisions. To be successful, the construction industry needs to free project data from closed systems. There must be a way to give all project stakeholders access to accurate information within the context of how it applies to the overall project that will empower everyone from owners to engineers to contractors to make timely, fully informed decisions that bring projects in on time and within budget. INTRODUCING THE OPEN TECHNOLOGY DATABASE The need for deep visibility into project information across systems and stakeholders has given rise in the construction industry to the open technology database. This approach enables project stakeholders to link the data in their existing software systems and connect that information into one centralized location. Project stakeholders can continue to use and maintain the data in their own systems while still feeding the information to the shared environment, which brings together critical project details, provides context for decisions and makes it easier for all parties to collaborate. Project stakeholders are now able to connect business data related to estimating, cost control, scheduling, contracts, purchasing, accounting and more. This creates a common data set across the project that can be quickly accessed and can easily be put in the hands of project decision makers. Innovative companies are taking this connectivity to a new level. They see the potential to use 3D models beyond simply the design aspects of a project and bring them into the activities of construction. Innovators are taking all the project information available in the shared environment and connecting it to the 3D model to create a comprehensive view of the project. Read the court decision
Read the full story...
Reprinted courtesy of Andy Kayhanfar, Construction Executive, a Publication of Associated Builders and Contractors. All Rights Reserved

Crowdfunding Comes to Manhattan’s World Trade Center

January 28, 2015 — David M. Levitt – Bloomberg
Got $5,000? You can invest in the 3 World Trade Center skyscraper under construction in lower Manhattan. Fundrise, a real estate crowdfunding business, is inviting individual investors to put as little as $5,000 into bonds backing the 80-story tower, according to a statement e-mailed by Joshua Greenwald, a spokesman for the Washington-based company. The total cost for the Richard Rogers-designed building is projected to be $2 billion. “We think the 3 World Trade Center investment offering is proof of the power of crowdfunding at work,” Dan Miller, co-founder of Fundrise, said in the statement. “We are proud to be able to give more people a chance to invest in this important iconic asset.” Read the court decision
Read the full story...
Reprinted courtesy of David M. Levitt, Bloomberg
Mr. Levitt may be contacted at dlevitt@bloomberg.net

Over 70 Lewis Brisbois Attorneys Recognized in 4th Edition of Best Lawyers: Ones to Watch in America

September 25, 2023 — Lewis Brisbois
(August 17, 2023) – 75 Lewis Brisbois attorneys across 25 offices have been named to the 4th edition of "Best Lawyers: Ones to Watch in America." Congratulations to the following attorneys on this recognition! You can see the full list of Lewis Brisbois attorneys named to Best Lawyers' 30th edition of The Best Lawyers in America here. Akron, OH

Associate Meleah M. Skillern – Commercial Litigation

Atlanta, GA

Partner Candis R. Jones - Insurance Law, Medical Malpractice Law – Defendants, and Personal Injury Litigation – Defendants

Boston, MA

Partner Amanda Mathieu - Labor and Employment Law – Management

Charleston, WV

Partner Sophie L. Johns - Product Liability Litigation - Defendants

Read the court decision
Read the full story...
Reprinted courtesy of Lewis Brisbois

Lake Charles Tower’s Window Damage Perplexes Engineers

October 05, 2020 — Autumn Cafiero Giusti - Engineering News-Record
When Hurricane Laura came onshore Aug. 27 as a Category 4 hurricane with sustained winds of 150 mph, it shattered windows on nearly every level of the 22-story Capital One Tower in the Lake Charles, La., business district. The glass damage is perplexing to engineers who study wind dynamics and window performance. Reprinted courtesy of Autumn Cafiero Giusti, Engineering News-Record ENR may be contacted at ENR.com@bnpmedia.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Maximizing Contractual Indemnity Rights: Components of an Effective Provision

December 02, 2015 — William Kennedy – White and Williams LLP
Tort law is aimed at providing compensation to the victims of negligence. Tort law encourages plaintiffs to cast a wide net, pursuing claims or suits against not only those whose fault seems manifestly primary, but also against defendants whose causal exposure is minimal, against those whose exposure is purely by operation of law. As discussed in the first installment of this series, "Maximizing Contractual Indemnity: Problems with Common Law," three common law principles – vicarious liability, joint and several liability, and common law indemnity – cause some parties to pay in excess of their actual degree of causal fault. Contractual indemnity can remedy that harsh result. Part Two: Components of an Effective Provision Properly composed, “broad form” contractual indemnity provisions permit an Indemnitee to shift the full range of financial consequences from tort exposure, including civil damages, defense fees, expert fees, and litigation expenses. Such contracts permit indemnity even where the underlying damage was incurred due to a degree of negligence or fault on the part of the Indemnitee. Such contracts can also allow an Indemnitee to shift to the Indemnitor the risk of loss for someone from whom the Indemnitor would otherwise be immune from suit (e.g., the Indemnitor’s employees). A well-written contract can even convert an entity which is an Indemnitor as to one party (e.g., a general contractor which has to indemnify a property owner) into an Indemnitee as to another party (e.g., a subcontractor) for the very same risk. Read the court decision
Read the full story...
Reprinted courtesy of William Kennedy, White and Williams LLP
Mr. Kennedy may be contacted at kennedyw@whiteandwilliams.com

Product Liability Alert: Evidence of Apportionment of Fault Admissible in Strict Products Liability Action

March 26, 2014 — R. Bryan Martin and Kristian B. Moriarty - Haight Brown & Bonesteel LLP
In Romine v. Johnson Controls, Inc. (No. B239761, filed March 17, 2014), the California Court of Appeal for the Second District held that a trial court must permit a defendant, in a products liability action, to present evidence of apportionment of fault among settling and non-settling entities. The case involved an automobile collision in which the plaintiff was struck from behind, causing the driver’s seat to recline and propel plaintiff into the back seat where she struck her head. Plaintiff was left quadriplegic as a result. Plaintiff brought suit against the driver who caused the accident, the Nissan entities who manufactured the car plaintiff was driving, Johnson Controls, Inc. (“Johnson”), Ikeda Engineering Corporation (“Ikeda”), Vintec Co. (“Vintec”), and Autoliv ASP, Inc., who designed and manufactured the driver’s seat of the vehicle plaintiff was driving, and against Faurecia Automotive Seating, Inc. who manufactured the recliner mechanism of plaintiff’s vehicle’s front seat. Ikeda participated in the design of the driver’s seat and Vintec manufactured the driver’s seat. Johnson manufactured the seat belt for the driver’s seat of plaintiff’s vehicle in accordance with Nissan’s design. Prior to trial, plaintiff settled with the defendant driver, the Nissan defendants, the Autoliv defendants, and Faurecia Automotive Seating, Inc. Plaintiff elected to proceed to trial solely on a cause of action for strict products liability against Ikeda and Vintec. Pursuant to a stipulation, Johnson agreed it would be legally responsible for damages awarded to plaintiff at trial based upon the actions of Vintec or Ikeda. At trial, the court precluded Vintec and Ikeda from offering evidence that: (1) plaintiff would not have been injured if her vehicle’s seat belt was designed in a different manner by Nissan; (2) Nissan chose the manufacturer of the recliner mechanism and required defendants to use that manufacturer and that part in the seat; and (3) The other defendants had already reached settlements with plaintiff. Reprinted courtesy of R. Bryan Martin, Haight Brown & Bonesteel LLP and Kristian B. Moriarty, Haight Brown & Bonesteel LLP Mr. Martin may be contacted at bmartin@hbblaw.com; Ms. Moriarty may be contacted at kmoriarty@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

COLUMBUS OHIO BUILDING EXPERT DIRECTORY AND CAPABILITIES